flange drive wheel keyway steel s355 wheel 250 mm flange 290 mm

flange drive wheel keyway steel s355 wheel 250 mm flange 290 mmFlanged drive wheel with keyway PU or Vulkollan tread on S355 steel core Flange 290 mm Running 250 mm Turned flanged drive wheel with keyway according to DIN 6885 and cast elastomer tread. The keyway accommodates a feather key for positive torque transmission to the drive shaft. The S355 steel core carries the load, while the PU or Vulkollan tread absorbs shocks. Tread material Selection Polyurethane MDI High quality MDI polyurethane, abrasion

Flanged drive wheel with keyway | PU or Vulkollan® tread on S355 steel core | Flange Ø 290 mm | Running Ø 250 mm

Turned flanged drive wheel with keyway according to DIN 6885 and cast elastomer tread. The keyway accommodates a feather key for positive torque transmission to the drive shaft. The S355 steel core carries the load, while the PU or Vulkollan® tread absorbs shocks.

Tread material — Selection

Polyurethane MDI — High-quality MDI polyurethane, abrasion-resistant, oil-resistant, and with good damping properties. Economical choice for medium to high loads. Hardness approx. 92 Shore A. Temperature -20°C to +80°C.

Vulkollan® — Premium elastomer from Covestro, highest load capacity with elastic running, extremely abrasion-resistant, capable of continuous loading. Hardness approx. 92 Shore A. Temperature -20°C to +80°C.

Core material: Steel S355 (bright)

Structural steel S355 with a minimum yield strength of 355 N/mm², good machinability, high strength. Standard material for driven industrial wheels.

Typical applications

Driven flanged wheels for AGVs, AGV drives, gantry cranes, trolleys, motor-driven chassis, and all applications with positive shaft connection.

Note on custom production

These wheels are manufactured to order. Delivery time upon request. Custom diameters, different bore tolerances, hub lengths, or key sizes are possible upon request.