6.6L Def Heater/Diesel Exhaust Fluid Reservoir Heater Kit Compatible With 6.6L V8 Chevrolet Silverado/Gmc Sierra 2500Hd 3500Hd Duramax Lml Lgh 2012 2013 2014 2015 2016#22872118, 904-394

6.6L Def Heater/Diesel Exhaust Fluid Reservoir Heater Kit Compatible With 6.6L V8 Chevrolet Silverado/Gmc Sierra 2500Hd 3500Hd Duramax Lml Lgh 2012 2013 2014 2015 2016#22872118, 904-394Diesel Exhaust Fluid Def Urea Heater Reservoir Assembly All Diesel Exhaust Fluid (Def) Systems Require Heating Elements To Prevent Def Fluid From Freezing At Temperatures Less Than 12 Degrees Fahrenheit. Def Heating Pots Are Designed To Quickly Return Def To Liquid Form, Ensuring Proper Flow Through The Lines And Pump Unit. If Your Diesel Vehicle Is Operating In Limp Mode, Or Is Not Operating At Full Power, A Common Culprit Is A Failed Def Heating

Diesel Exhaust Fluid Def Urea Heater Reservoir Assembly

All Diesel Exhaust Fluid (Def) Systems Require Heating Elements To Prevent Def Fluid From Freezing At Temperatures Less Than 12 Degrees Fahrenheit. Def Heating Pots Are Designed To Quickly Return Def To Liquid Form, Ensuring Proper Flow Through The Lines And Pump Unit. If Your Diesel Vehicle Is Operating In Limp Mode, Or Is Not Operating At Full Power, A Common Culprit Is A Failed Def Heating Element.
The Diesel Exhaust Fluid Heater, Commonly Called The 'Def Heater', Is Located In The Def (Diesel Exhaust Fluid / Urea) Tank And Actually Contains The Pickup Tube For The Reductant Pump Module, An Electric Heating Element, A Temperature Sensor, A Pressure Sensor, And An Electrode-Type Level Sensor. It Enables The Scr (Selective Catalytic Reduction) To Function At Low Temperatures.

Fits The Following :

2012 2013 2014 2015 2016 Chevrolet Silverado 2500 Hd
2012 2013 2014 2015 2016 Chevrolet Silverado 3500 Hd
2012 2013 2014 2015 2016 Gmc Sierra 2500 Hd
2012 2013 2014 2015 2016 Gmc Sierra 3500 Hd

Method Of Installation:
?Remove The Oil Out Let Dust Cover And Return Oil Outlet Dust Cover On The Flange, And Then Insert The Oil Seal Ring And The Return Oil Ring.
?Install The Top Seal Ring Into The Urea Tank.
?Install The Pre-Heater Into The Urea Tank And Rotate It To The Right By 10°Tolock The Oil Tank Firmly.Then Press The Top Cover Into The Urea Tank Port,And Press It Tightly With The Seal Ring Of The Top Cover.
?Screw The Flange Plate To Fix The Top Cover.
?Install Urea Pump Assembly.
?Connect Vapour Filtration Lines,Wiring Plugs,Etc.Use Ribbon To Fasten The Wiring
?After All Installed,It Needs To Meet Certain Conditions To Make System Work,So Directly Using Computer To Control The Detection System To See Whether It Is Working,Or It Is Necessary To Start The Vehicle For