SKU: 78736351448

KRX2 KRX4 1000 In-Dash Heater

$275.40 $306.00
Save 10%
No.2 Bestseller on tworldvietnam.com >

Pay in installments of $76.50 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 22 - Jul 27

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

KRX2 KRX4 1000 In-Dash HeaterTeryx KRX 1000 In Dash Heater Ride in Frigid Temps It's crazy only to ride 8 months of the year because the other 4 months are cold. Installing SuperATV's Kawasaki Teryx KRX 1000 In Dash Heater allows you to ride all year round regardless of the frigid temperatures. It mounts directly in your dash, so it doesn't take up all your leg room. And its multiple fan settings allow you to control your cab's comfort level. With this heater installed on your

Teryx KRX 1000 In-Dash Heater

 

Ride in Frigid Temps
It's crazy only to ride 8 months of the year because the other 4 months are cold. Installing SuperATV's Kawasaki Teryx KRX 1000 In-Dash Heater allows you to ride all year round regardless of the frigid temperatures. It mounts directly in your dash, so it doesn't take up all your leg room. And its multiple fan settings allow you to control your cab's comfort level. With this heater installed on your KRX 1000, you can ride as long as you want in the cold.

  • Mounts under your dash
  • Defrosts your windshield
  • Easy to install


Defrost Your Windshield
Lucky for you, defrosting your windshield has never been easier. This kit has two defrost vents and hoses in addition to the vents in the heater itself. And by mounting it in the dash, no one sees the hoses and your feet won't knock them loose. Plus, this heater draws heat directly from the engine and has a powerful blower, so your windshield will be clear in minutes.

Comfortable Cab
So how does it work? It pulls heat directly from your engine. That means the longer you ride, the more comfortable you'll be. This kit also uses high-grade radiator hoses rated from -40°F to 285°F, so no matter how cold it is outside or how hot your engine gets, your KRX 1000 heater can handle it.

Easy Installation
There’s nothing worse than a 50 page installation manual. That’s why we’ve made installation super easy. We've included everything you need, from hoses to the wiring. You'll have this bad boy installed and will be rippin' donuts in the snow in no time.

Heat Even Better with a Quick-Start Flow Valve
Optimize your heater with a quick-start flow valve to halve the warm-up time. It diverts all engine coolant straight to your heater core at low temps. Once your engine warms up to the ideal temperature, the valve automatically opens, ensuring a balanced coolant flow to both the heater core and radiator.

Get Heat in 30 Seconds with an Idle Flow Pump
Get your heater to blow hot air in half a minute with our idle flow pump! It keeps the coolant moving quickly through your UTV, so it warms up faster even when you are slow or at idle.

Quick-Start Flow Valve Idle Flow Pump
Gets you heated air twice as fast Warms up heater in under 30 seconds
Diverts coolant to your heater core at low temps Actively pumps coolant at idle to increase heater temps
Combine our Quick-Start Flow Valve and Idle Flow Pump for maximum heat as quickly as possible when you’re slow or idle.

 

Features:

  • Adjustable fan speeds
  • 360° adjustable vents
  • Includes defrost hoses and vents
  • Built-in shutoff valve
  • 5.2 amps at 13.6 volts
  • Capable of 20,000 BTU at 135 CFM
  • High-grade radiator hoses—rated -40°F to 285°F
  • IP67 rating
  • Easy install—includes all necessary hardware and instructions
  • Add a quick-start flow valve and an idle flow pump to get heated air faster

Fitment:

  • Kawasaki Teryx KRX 1000 : 2020+
  • Kawasaki Teryx KRX 4 1000 : 2023+

NOTE: Does NOT work if the OEM windshield wiper is installed.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 78736351448

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 14 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
J. S. Kline
Massapequa, US
★★★★★ 5
Excellent Cabinet for someone good at mounting a cabinet
Color: White, Style: Wall Cabinet
The cabinet arrived very well packaged with an instruction booklet, hardware, and an Allen wrench. The booklet says you will just need a Phillips screwdriver, but you will also need a drill with an appropriate bit (more on the bit later) to mount the cabinet on the wall. Assembling the cabinet was simplified by how well the cabinet pieces and hardware were labeled and referenced in the instruction booklet. The holes in all the cabinet parts lined up nicely. The doors swing on spring loaded pivots. They are not adjustable, but work well and are probably much less expensive than European style hinges. I was concerned that the doors would not line up, but they look fine. The Magnetic Latch also works well, but the little piece of wood that it mounts on fell off during assembly so I glued it back in place. This was the only problem I had assembling the cabinet. I let the glue dry overnight and mounted the cabinet the next day. The wood support plate they ship with the cabinet is a great way to hang a cabinet, however I did have some problems using the supplied anchors. I recommend having some other anchors and screws available in case you have similar issues. Skip this paragraph if you do not care about the details: I mounted the cabinet on drywall. The instructions said to drill 11/32” holes for the supplied plastic wall anchors. I did not have an 11/32” bit so I used a 5/16” bit. Even though my holes were 1/32” smaller than specified, the anchors slid into the drywall very easily without having to tap them. I recommend using a 5/16” bit or even a 9/32” bit instead of the 11/32” they specify. Next I mounted the support plate with the supplied screws, but I could not get the screws tight enough to hold the plate securely in place. It felt like the screws were too small in diameter so I used some slightly larger screws. That worked fine for one of the screws holding the plate and the two lower screws, but the second screw through the plate would not bite and hold the plate firmly. Fortunately I had one HILTI 3/16” hollow wall metal anchor left over from a previous project and was able to get the plate very solidly attached to the wall. My wife is very pleased with the cabinet. I did have some trouble with the latch and the install so I was tempted to knock off a star, but I think this is a 5-Star item considering the low cost and how well the the cabinet parts aligned with each other.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 20, 2025
M
Verified Purchase
Monica G.
Waukegan, US
★★★★★ 5
Love and amazing for the price!
Color: White, Style: Wall Cabinet, Color: White, Style: Wall Cabinet
Perfect! I'm a renter and didn't want to spend an arm and a leg on something that might not work in the next place so this looked like it would be a good fit. I really wasn't expecting much for the price point but I was VERY pleasantly surprised. It's a great piece. I love assembling things (I'm an Ikea pro) but this had literally the easiest and most explicit instructions I have ever seen. Every piece is clearly labeled. The hardware comes in a bubble pack, again clearly labeled. Rhe instructions are very clear. Another thing I appreciated was the mounting mechanism which is a French cleat. It is much easier to level and screw in a cleat than to recruit help and try to hold a cabinet in place and try screwing it in. I'm a fat middle age woman and I had no problem mounting it by myself. Notice there are no screws visible on the outside. That was a huge selling point for me. Only con is that for the quality of everything else, the shelves are on the thin side, placing anything substantial would definitely make them bow. Background is a scrap of peel-and-stick.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 28, 2026
K
Verified Purchase
Ken
Los Angeles, US
★★★★★ 5
Good cabinet choice
Color: White, Style: Wall Cabinet
I needed a wall cabinet for a recessed area above the toilet. This one fits the area perfectly and provides a good amount of storage in an otherwise wasted space. It looks good as it coordinates well with my white shaker style cabinets elsewhere in the room. It was easy to assemble, doors lined up perfectly, and mounting was a breeze with the included screws and hardware. It doesn't get hard use in this location, but seems sturdy after almost a year.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 7, 2025
A
Amazon Customer
Belleville, US
★★★★★ 5
Versatile Room Divider With Easy Assembly and Strong Coverage
Size: 3 Panel 12FT W
I picked up this Siebwin 3-panel folding room divider mainly for privacy and room separation, and overall it works very well. Assembly is very straightforward, and the divider can be set up, taken apart, and stored without much effort. The fabric quality feels good, and the frame construction is stronger and more stable than expected. The support tubes especially feel well built and help keep the divider standing securely. One feature I really liked is the flexibility of the design. The panels can be used together as a complete divider or separated depending on the setup and available space. That makes it much more versatile for different room layouts or temporary privacy needs. The coverage is also very good, and the size matches the manufacturer’s description accurately. The fabric blocks light and background visibility well enough to provide solid privacy without feeling overly heavy. The wider feet also help improve stability compared to thinner folding dividers. Another positive detail is that everything arrived complete with no missing parts or damaged pieces, which made assembly much easier and faster. Compared to cheaper privacy screens, this one feels more durable and easier to customize depending on the situation. In terms of value for the money, it feels like a very practical and worthwhile purchase considering the size, flexibility, and build quality. Overall, a versatile and well-built room divider with easy assembly, strong privacy coverage, stable construction, complete included parts, flexible panel configuration, and excellent everyday functionality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
F
Fred
Omaha, US
★★★★★ 5
Stable, flexible in deployment configuration, creates true privacy and looks great.
Size: 3 Panel 12FT W
This is the second room divider panel I have installed, and there are several features about this one that I like much better than my older one. The fact that there are no gaps and that the material is thicker means you get more privacy or more hiding power, if you wish. My older divider has vertical spaces between each of the panels and the panels are half as wide as the Siebwin panels, so there are many vertical spaces. The Siebwin divider really creates privacy. Another feature that I really appreciate is that the legs are wider and stand off from the floor. On my older one the legs are flat and they're rather awkward to adjust because they create more drag on the floor. The feet on the older one also loosen if you turn them counter clockwise, so adjustments of configuration that require the feet to be moved are more complex. The older divider also must be deployed in a zig-zag fashion because he feet are not as wide, but this new one can be deployed and stable in a straight, an "N" shape or an arc. They are both the same length, but because the older one must be use in a zig-zag deployment it doesn't reach to the length of the new one. The Siebwin divider definitely costs more at $103.48, but it sports several features and advantages over the other brand, so it does a better job and is worth the extra cost.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026

recommand products

Bussmann FWP10A14F NSNP **GENUINE** FWP 10A14F
10.08
Cutler Hammer Eaton D100EE10 NSFP **GENUINE** Westinghouse CH
58.50
Pajama Party 60 Piece Jigsaw Puzzle Eurographics
14.99
Square D 9998LB33 NSFP **GENUINE** 9998 LB33
42.00
Cutler Hammer Eaton D23MD10 NSFP **GENUINE** Westinghouse D23 MD 10
44.40