Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 10 - Jul 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
DeWalt HAMMER-CAPSULE‚® 1" Drive-In Capsule Adhesive - 6 QtyThe Hammer Capsule system consists of a self contained, single use, two part glass capsule into which threaded anchor rod or reinforcing bars can be directly driven without the need for a chisel point or spinning action. It is designed for use in the installation of 3 8" through 1" diameter threaded rod in solid concrete and masonry materials. It can also be used to install reinforcing bars. A mixture of hardener and quartz aggregate is contained in
The Hammer-Capsule system consists of a self contained, single use, two-part glass capsule into which threaded anchor rod or reinforcing bars can be directly driven without the need for a chisel point or spinning action. It is designed for use in the installation of 3/8" through 1" diameter threaded rod in solid concrete and masonry materials. It can also be used to install reinforcing bars. A mixture of hardener and quartz aggregate is contained in the upper portion of the capsule while the lower portion contains an epoxy acrylate resin. Unlike traditional capsule anchors which required the use of chisel-pointed anchor rod and special installation tools, the Hammer-Capsule is designed for use with straight cut anchor rod.
Features
- Fast, easy installation - no special adaptors required for setting
- Excellent chemical resistance
- Components are mixed during installation of rod or rebar
- Pre-measured chemical component volumes no waste and simplified placement
- Ideal for small projects
Applications
- Anchoring rebar (doweling), and threaded anchor rods in solid concrete and grouted concrete masonry
- Steel erection including anchoring of equipment and column base plates
- Resistant to vibratory loads introduced from machinery, moving vehicles, etc
- Barriers, fencing and railing attachments
Specifications
- Size: 1"
- Anchor Name: Chemical
- Adhesive Anchoring Kit: No
- Solid Wall Anchor Application: Concrete
- Solid Wall Anchor Base Material: Concrete
- Fastener Category: Anchors
- Connection Design: Concrete to Steel
- Fastener Type: Adhesive
- Application: Masonry
- Green Seal-36 Certified: No
- Piece Count: 6
- Suitable Base Materials: Normal-weight concrete, Grouted concrete masonry
- Permissible Installation Conditions (Adhesive): Dry concrete, Water-saturated concrete (wet)
Approvals & Listings
- Independently tested to ASTM E1512 and AC58 Criteria including creep resistance
Downloads
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 2165 reviews
Sort
Product Reviews
★★★★★ 5
Coolest wireless charger design I've seen
I just gotta say that this is the coolest design for a wireless charger, looks kinda futuristic. Now how well does this work? Amazingly well and truly easy to use. It is adjustable, stable and much safer for everyone. I really like this charger.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 6, 2026
★★★★★ 3
Wow that light color ring is annoying
There is no way to turn this color light off. I don't even know why it has to have a light at all. I suppose it is to tell you it has power. But the light could have been something that momentarily turns on and then off as you place the phone on.
I'm a DIY'er and I'm going to find a way to take this apart and disable the light. I'll report back if I'm successful.
The good news is that this mount is identical to another one I have except for the magnet charging section. I'm talking it is identical down to the knobs and metal arm so it's generic in that sense. They only changed out the magnetic section. This type of mount holds well to the screen. The charging speed seemed adequate. Not terribly fast but not slow. Wirelessly charging is always slower than plugged in.
The supplied USB cable is braided and feels like quality.
See attached picture. This mount is not something you'll necessarily want to use every time you drive. Therefore the color ring is annoying.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 20, 2026
★★★★★ 5
SLEEK EXTENDABLE SCREEN MOUNT
HIGH SPEED TESLA MAGSAFE POWER
i picked this up for my Model 3 to see if the 25W Qi2.2 charging actually lives up to the hype during my daily work week.
✨ The CNC aluminum build is top notch and feels much more robust than the flimsy plastic mounts i have tested. It's a piece of cake to clamp onto the corner of the Tesla screen and the metal arm matches the interior aesthetics perfectly. The magnetic hold is strong enough to keep my phone secure even when i am taking sharp turns thru my weekend adventures.
✨ Performance is where this thing shines because it actually delivers the 25W speeds without overheating. The built in cooling fan is a smart design choice that keeps the temperature down during long drives. i can hear the fan if the music is off but it's barely noticeable and definitely worth it for the consistent charging speed.
✨ The RGB lighting adds a subtle glow that makes it easy to find the mount in the dark without being distracting. Having the extendable arm is a big benefit for finding the perfect line of sight without blocking the main touchscreen. It's clearly a well thought out solution for any Tesla owner who wants a professional grade charging setup.
THE VERDICT
This is a exceptional piece of hardware that delivers real world results for high speed charging. The combination of active cooling and a sturdy metal build makes it a first class addition to my car.
'As a 35 year veteran of the computer technology industry, I offer informed and experienced perspectives in my product reviews.'
I will update this review if anything changes within 1 year.
★★★★★ (5 Stars): A 5 star rating indicates the product meets my expectations for its purpose.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 13, 2026
★★★★★ 5
Works great. Perfect position
Grip and charging are great. I like the position because it doesn't block my view or the vents
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 31, 2026
★★★★★ 5
Great design. Love it.
I have been using this charger for several months now. I think the design is fantastic. I've seen other reviews which question the reliability of it. My experience has been the opposite. I have a folding phone so it's not light. The connection to the dash has remained intact without fail. I am careful when removing the phone. I don't just yank it off.
It charges as it should. The magnetic force is what I expected. Holds my phone with no issues or concerns it could fail and drop the phone. It's super convenient to have this integrated design. My dash is already occupied with a portable android auto unit. My 4Runner is older and did not have that feature.
Again, this is plastic. Handle it with some care and I don't see anyone having issues with breaking. It has worked out great for me. Recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 15, 2025