Pay in installments of $41.24 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 30 - Aug 4
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Sennheiser MKE600 Super-Cardioid Video Camera Shotgun MicrophoneHighlights Pronounced directivity Maximal rejection of side noise Switchable "Low Cut" filter minimizes wind noise Phantom or battery powering Battery switch with "Low Batt" indicator Rugged all metal housing Very good suppression of structure borne noise Supplied with foam windshield and shock mount The MKE 600 is the ideal video camera camcorder microphone able to handle even demanding filmic challenges. Due to its high directivity, the MKE 600
Highlights
- Pronounced directivity
- Maximal rejection of side noise
- Switchable "Low Cut" filter minimizes wind noise
- Phantom or battery powering
- Battery switch with "Low Batt" indicator
- Rugged all-metal housing
- Very good suppression of structure-borne noise
- Supplied with foam windshield and shock mount
The MKE 600 is the ideal video camera/camcorder microphone able to handle even demanding filmic challenges. Due to its high directivity, the MKE 600 picks up sounds coming from the direction in which the camera is pointing and effectively attenuates noise coming from the sides and rear. The switchable “Low Cut” filter additionally minimizes wind noise.
Because some video cameras/camcorders do not provide phantom power, the MKE 600 can also be battery powered. A battery on/off switch prevents the battery from discharging prematurely; “Low Batt” is displayed.
- Dimensions: diameter 20 mm, length 256 mm
- Microphone: super-cardioid/lobar
- Frequency response: 40 Hz to 20 kHz
- Max. sound pressure level: 132 dB SPL at P48; 126 dB SPL with battery powering
- Weight: 128 g (without battery)
- Sensitivity in free field, no load (1kHz): 21 mV/Pa at P48; 19mV/Pa with battery powering
- Equivalent noise level: 15 dB (A) at P48; 16 dB (A) with battery powering
- Operating time: approx. 150 hrs
- Power supply: 48 V +/- 4V (P48, IEC 61938) or battery/rechargeable batt. 1,5V/1,2V AA size
- Current consumption: 4,4 mA at P48
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 10 reviews
Sort
Product Reviews
★★★★★ 5
Must for subwoofers. True 2mm spec. High quality.
Model: 36 SqFt(3.4 SqM), Model: 36 SqFt(3.4 SqM)
Let me start of by saying WOW! This made a huge difference in the SQ of my L7S pushing 930w rms. Before I had major rattles in my 2020 Honda Civic SI. Taking the time to do this to my trunk and Lid made me realize just how loud my subwoofer actually is. It literally eliminated the rattles throughout my whole car. I still plan on doing this to my doors and rear deck but once I upgrade the speakers. I still have half of the box just doing the trunk and lid so 1 box of 36sf will be enough for most of the areas that need to get done. You may need a little more overall. This is true 2mm spec. Very sticky and easy to apply. It just take time to finish the work correctly and roll it down. It is not as heavy as I thought it was going to be. The size of the sheets are perfect for what you need to do. The value is on point for the quality. It does not rip very easily but you can cut it to size without any problems. Again, This is a must buy for anyone who is pushing 1000w rms or more.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 29, 2025
★★★★★ 5
Quality product you
Model: 18 SqFt(1.7 SqM), Model: 18 SqFt(1.7 SqM)
Summary: Great quality product, priced right. Cuts and installs easy-follow the instructions people!! PRO TIP-you don’t need to cover every square inch. OVERKILL!! Think about it-when a bell rings you could put your fingers on the edge and silence it right? Same rules apply here. A strip or square will isolate the vibration and notice when placed correctly— knock on the surface and see what vibrates or what part makes the loudest drowning and that’s a good clue of where you should put a piece of this…unless you’re trying to use it for temperature insulation no need to go ape on it. If you look at the bottom of a stainless steel sink, it’s got a stripe or a small sticker of insulation that keeps it from rattling. You can do that here. What’s important to note is the instruction specifically say use a roller to roll the ribs out until it’s smooth that way you’ve got maximum adhesion. I see a lot of pictures and videos from people that finished their install and didn’t follow this simple instruction. It makes sure that it’s stuck down before you put all your paneling and carpet back in and it’s a small step with a cheap wooden roller it’s easy. I’ll say the installation with this product is a breeze. You can use sharp scissors or a blade. It does get gummy after a while, and you may need to clean off your blade or your scissors, but it cuts very well and the ribs make it easy to size in space the thickness is fantastic and the backing paper comes off quite easily. I’ve done lots of installations with Graphics emblems you name it and this product is very easy to use and represents good value.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2026
★★★★★ 5
Good stuff !
Model: 36 SqFt(3.4 SqM), Model: 36 SqFt(3.4 SqM)
This is an excellent product. Easily moldable, cuttable with good scissors or razor knife, very sticky, works great.
This pack was enough to do all 4 doors on a crew max truck, and I went wild on the fronts. I used 9 peices on each rear door which was just enough, and the rest on the fronts. I doubled up layers and even used some on the back of the door panels. If you follow the instructions and dont go wild you might even have extra left over.
It works just like you would imagine. Without doing the entire cab there will still be road noise but this helped noise, better audio, no buzzing door panels, terrific improvement.
It is kind of heavy, so extra weight is added to truck, but that really isnt a bad thing. It is noticable but in a good way.
Get it. Use it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 20, 2026
★★★★★ 4
Good product
Model: 36 SqFt(3.4 SqM)
Easy to roll out. Works great
Why did you pick this product vs others?:
Fair price for the amount of coverage, good quality
Works well:
Easy to install, rolls out great. Forms to contours well
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 13, 2025
★★★★★ 5
Great product
Model: 36 SqFt(3.4 SqM)
I used this on the doors of a Toyota Tacoma, worked as it described. Reduced the road noise significantly.. Need to buy another box for the floor and roof of the truck..
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2026