Hozelock Bioforce Metal Lid Clamp Z12365 – Fits 6000, 9000 & 14000 Models

Hozelock Bioforce Metal Lid Clamp Z12365 – Fits 6000, 9000 & 14000 ModelsGenuine Hozelock Bioforce Lid Clamp Z12365 replacement for securing pond filter lids. Durable metal construction. Compatible with Bioforce 6000, 9000, and 14000 models. Prevents leaks and ensures optimal filtration performance. Compatibility: This metal lid clamp is suitable for the following Hozelock Bioforce models: Bioforce 6000 (Revolution) Bioforce 9000 (Standard & Revolution) Bioforce 14000 (Revolution) Bioforce 12000(Note: Also compatible with

Genuine Hozelock Bioforce Lid Clamp Z12365 replacement for securing pond filter lids. Durable metal construction. Compatible with Bioforce 6000, 9000, and 14000 models. Prevents leaks and ensures optimal filtration performance.

Compatibility:
This metal lid clamp is suitable for the following Hozelock Bioforce models:

• Bioforce 6000 (Revolution)

• Bioforce 9000 (Standard & Revolution)

• Bioforce 14000 (Revolution)

• Bioforce 12000
  (Note: Also compatible with older and newer variants of the Bioforce filter range. Always confirm part number Z12365.)

Installation Instructions:

1. Turn Off Power: Ensure the filter system is disconnected from the power supply before starting.

2. Release Pressure: Open the air release valve (if present) to relieve internal pressure.

3. Remove Old Clamp: Carefully undo the old clamp using a screwdriver or pliers, depending on the existing fitting.

4. Align Lid & Body: Ensure the filter lid is properly seated on the canister body with the O-ring in place.

5. Fit New Clamp: Position the new Z12365 metal clamp evenly around the lid. Tighten it securely until the lid is firmly held in place.

6. Test for Leaks: Reconnect the filter and power on. Check for leaks around the lid to ensure a proper seal.

For best results, inspect the filter O-ring for wear and replace if necessary during clamp replacement.