Wera 074716-010 Custom Pre-Set Torque Screwdriver, 1.2 - 3.0 Nm

Wera 074716-010 Custom Pre-Set Torque Screwdriver, 1.2 - 3.0 NmWera 074716 010 Custom Pre Set Torque Screwdriver, 1. 2 3. 0 Nm For any application where the same constant torque and repeat accuracy are required Desired fixed torque setting can be made in the following units: Nm, kgf. m, lbf. ft., ozf. in., dN. m, kgf. cm, lbf. in, in. oz, cN. m, gf. m, ft. lb, gf. cm, in. lb. Fixed value can also be easily adjusted between 1. 2 and 3. 0 Nm using Wera's Recalibration Kit and any appropriate torque tester

Wera 074716-010 Custom Pre-Set Torque Screwdriver, 1.2 - 3.0 Nm

For any application where the same constant torque and repeat accuracy are required
Desired fixed torque setting can be made in the following units: Nm, kgf. m, lbf. ft., ozf. in., dN. m, kgf. cm, lbf. in, in. oz, cN. m, gf. m, ft. lb, gf. cm, in. lb.
Fixed value can also be easily adjusted between 1.2 and 3.0 Nm using Wera's Recalibration Kit and any appropriate torque tester
Rapidaptor technology for rapid 1/4" hex bit change
Distinct signal when pre-set value is reached
Multi-component Kraftform handle for high working speeds
Unlimited counter-clockwise torque for loosening stuck screws
Handle length: 105 mm
Total length: 155 mm
Manufacturer's part number 05074716010

Note: this screwdriver is pre-set at the factory and requires a specified torque value at the time of ordering.