Pay in installments of $26.53 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 15 - Jul 20
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Schlage Century Satin Nickel Entry Door Handle with Latitude LeverCentury Satin Nickel Entry Handle with Latitude Lever Modernize your entry with Schlages Century handleset paired with the Latitude interior lever in Satin Nickel. This front entry set installs easily on standard doors and pairs with your choice of mechanical or smart deadbolt for secure, stylish curb appeal. Key Features: Easy Installation: Self aligning screw holes and adjustable throughbolt for a fast, screwdriver only setup Durable Construction:
Century Satin Nickel Entry Handle with Latitude Lever
Modernize your entry with Schlage’s Century handleset paired with the Latitude interior lever in Satin Nickel. This front entry set installs easily on standard doors and pairs with your choice of mechanical or smart deadbolt for secure, stylish curb appeal.
Key Features:
- Easy Installation: Self-aligning screw holes and adjustable throughbolt for a fast, screwdriver-only setup
- Durable Construction: Premium metal build with ANSI/BHMA A156.39 Residential Grade AAA rating
- Universal Fit: Works with left- or right-handed doors; universal latch fits 2-3/8" or 2-3/4" backsets
- Flexible Pairing: Ideal for entry doors; pair with a mechanical or electronic deadbolt (sold separately)
- Trusted Warranty: Backed by a limited lifetime mechanical and finish warranty
Specifications Table:
| Specification | Details |
|---|---|
| Finish | Satin Nickel |
| Series/Style | Century front entry handle with Latitude lever |
| Backset | Universal; adjusts to 2-3/8" (60mm) or 2-3/4" (70mm) |
| Door Thickness Range | 1-1/2 in. to 1-7/8 in. standard; thick door kit available up to 2-1/4 in. |
| Handing | Universal handing; works with right and left handed doors |
| Installation | Self-aligning screw holes; adjustable throughbolt; installs with a screwdriver |
| Certification | ANSI/BHMA A156.39 Residential Grade AAA |
| Ideal Use | Entry doors; pair with mechanical or electronic deadbolt (sold separately) |
| Keying | F-Series 5-pin tumbler; two keys per lock (when applicable) |
| Warranty | Limited Lifetime Mechanical and Finish Warranty |
| Minimum CTC Between Bores | Minimum 5-1/2 in. center-to-center between cross bore holes |
Frequently Asked Questions (FAQ):
Q: Does this include a deadbolt?
A: No. This front entry handle is designed to be paired with a separate deadbolt (mechanical or smart).
Q: Will it fit my existing door prep?
A: Yes, it fits standard doors 1-1/2 in. to 1-7/8 in. thick with 2-3/8" or 2-3/4" backsets, and requires a minimum 5-1/2" center-to-center between cross bore holes.
Q: Is it reversible for left- or right-handed doors?
A: Yes, it has universal handing for right and left swing doors.
Q: What keys does it use?
A: F-Series handlesets use a 5-pin tumbler and include two keys per lock (when paired with a keyed product).
Q: Is it ADA compliant?
A: No, it is not ADA compliant.
Sleek Geometry for a Sophisticated Entry
The Century handleset with the Latitude lever is a study in clean lines and satin warmth, instantly refining your doorway. Its crisp rectangular silhouette meets a slender, minimalist lever—an elevated contrast that feels both modern and timeless. Pair it with a matte black mailbox or sculptural house numbers for a curated facade. This is the polished finishing touch that sets the tone for luxurious, everyday living.
Elevate your curb appeal and secure your entry—add the Century handle with Latitude lever to your door today.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 14 reviews
Sort
Product Reviews
★★★★★ 5
Great monitor arm stand.
Style: Single Arm, Size: 13"-34"
Very happy with this product. It's sturdy and easy to install. Love the tilt and swivel feature. The fittings for the stand are very well made. I suggest this for the quality and the price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 3, 2026
★★★★★ 5
Easy to set up & works great
Style: Single Arm, Size: 13"-34"
It was super easy to get set up, came with all the hardware ypu need to install multiple ways. Holds my monitor securely and is still easy to move around. The adjustments are easy to access and have plenty of variation. Great purchase, such a reasonable price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026
★★★★★ 5
I love it!!
Style: Dual Arms, Size: 17"-33"
I love this product. I do a lot of gaming and you tube watching. At the same time a lot. With this I keep my desktop clear so I can have my notebooks there and can still have both my monitors up and running. Another plus is if I decide to sit on the couch and play the console I can turn the screen a full 180 degrees so I can setup you tube and play games on the T.V. using the console.
The product itself feels to be of decent quality. It is not all plastic. The clamp is nice and strong.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
★★★★★ 3
Gets the job done. Just barely.
Style: Dual Arms, Size: 17"-33"
It holds up my monitor, but just barely, and without any confidence or finesse.
I had to move on from my previous arm mounts, the HUANUO. Those claimed to hold up to a 30 inch monitor and support 20 pounds. When I upgraded to a Samsung Odyssey Neo G8, it could no longer perform its duties. The gas shock was up to task, but the final adjustment piece that tilts it up or down was a hard down.
Queue this piece of hardware! 22 pounds is more than 20, and 32 is more than 30. This time I'm not even technically out of spec. The clamping force seems more than adequate to hold this to my desk. I will, at this point, basically walk you through how I feel about this mount, based on the order of installation instructions.
The way it goes together means that you will have to pull your desk out to maneuver the clamp in place before snugging it back up to the wall, a point in the HUANO's favor since it had a clever leveraging mechanism that lets you hang it with your desk still against the wall.
The way cords route through the arms close to the base means that you have to route them before you put the swivel arm on the base. This is because it has a screw at the front and back to secure the cover, and the angle/height are such that you cannot fit a screwdriver into the bottom one after you mount it. While not impossible to do with it installed, it would involve a right-angle screwdriver. They provide one of those, but the screwdriver bit of it is on the long shaft, and you would need it on the short shaft to get to that screw.
The way the swivel arms mount on the base is less than ideal as well. The arm slips onto a robust metal hub, and you tighten a screw that pushes against a plastic tab that makes it harder or easier to move. The location for this screw faces the wall. So you must turn the arm at an extreme angle to make it tighter or looser. Not a big deal, but noticeable.
Top arms go on smoothly, cable routing is simple and easy. No complaints about this section.
Mounting the monitor. The instructions are to mount the plate to the monitor, and then slide the plate onto the holder and secure it with the screw. I did this for neither of my monitors, although I tried it for my second. My big monitor went smoothly by mounting the bracket ahead of time and just forcing the arm down into position while my monitor rested on my desk. I tried this for my second bracket, but it was much harder to do with the monitor in a vertical orientation. So then I tried to do it the way the instructions wanted. I would have been able to do so, but my monitor has the mounting location set into the back of the monitor. This means that you can't mount it flush and then slide it on because you don't have clearance. So I tried to use the spacers. The spacers aren't spacious enough and the screws bottomed before snugging. While I'm not saying that solution wouldn't have technically worked, I instead reverted back to mounting the bracket first. This time I laid my monitor flat on the desk, reduced the tension in the shock greatly, and placed it into position that way.
At the end when it's complete and setup? It works. It will hold the G8. But just barely. The G8 uses an adapter to go from the monitor mounting points to VESA 100. This adapter sticks out quite a bit from the monitor, which means the weight is further away from the mounting point. Getting the tilt adjustment to hold involved a bigger allen wrench and cranking it further than it seems like it was meant to go. It groaned, but it held. It wants to dip if you mess with it, so I crank it again. Will it one day totally fail on me and point my monitor at my desk? Maybe. But it works on day 1, so that's a start.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 29, 2024
★★★★★ 5
The Best Cable Management Solution for IT Work — Reusable, Reliable, and Professional
Size: 150Pk - 8" x 1/2", Style: Cord Wrap Cable Ties, Color: Black and Gray
TL;DR: I’ve been using these VELCRO Brand cable ties for years as an IT field tech. They hold tight, are endlessly reusable, and keep cables tidy. Great for both home and professional setups.
Full Review:
As an IT field technician, I’ve tried countless ways to keep cables organized, and these VELCRO Brand cable ties are simply the best. They’re reusable, strong, and easy to reposition — ideal for network racks, AV installs, or just cleaning up cords around the house.
Functionality:
Top-notch. The hook-and-loop material is aggressive enough to hold firmly, but not so sticky that it clings to everything else in your tool bag. They wrap cleanly, stay put, and release easily when you need to re-route cables. They’re reliable enough for professional jobs and flexible enough for home use.
Storage Capacity:
Each strap holds more than you’d expect — I rarely need to link two together. They handle thick cable bundles or power cords just fine on their own. And when I do need more length, it’s easy to join a second strap for a larger wrap.
The two-color mix (black and gray) is great for keeping different cable types separated — for instance, network vs. power. The thin profile also helps keep bundles neat and professional-looking.
These have earned me plenty of compliments from higher-ups for clean cable runs and well-organized setups. Once you switch to these, you’ll never want to deal with cutting zip ties again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 12, 2025