Pay in installments of $3607.88 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 30 - Aug 4
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Southbend (Middleby) 4601AA-2CL Ultimate Gas RangesSouthbend Ultimate 60" Gas Restaurant Range 6 Non Clog Burners 24" Left Side Charbroiler Double Convection Ovens Combine open top power, steakhouse quality charbroiling and high volume convection baking in one heavy duty platform. The Southbend Ultimate Series is engineered for the demands of busy restaurants, hotels and institutional kitchens that run from prep to close without missing a beat. Key Features Six cast iron, lifetime non clog burners
Southbend Ultimate 60" Gas Restaurant Range
6 Non-Clog Burners | 24" Left-Side Charbroiler | Double Convection OvensCombine open-top power, steakhouse-quality charbroiling and high-volume convection baking in one heavy-duty platform. The Southbend Ultimate Series is engineered for the demands of busy restaurants, hotels and institutional kitchens that run from prep to close without missing a beat.
Key Features
- Six cast-iron, lifetime non-clog burners rated at 33,000 BTU each (standing pilots).
- 24" radiant charbroiler (left side) with 64,000 BTU output for perfect grill marks and smoky flavor.
- Two 32,000 BTU convection ovens with battery-spark ignition; each ships with 3 racks & 5 position slides.
- 22.5" stainless flue riser with integrated storage shelf keeps platters, spices or smallwares handy.
- 4" deep stainless front rail and removable drip trays for a cleaner, safer cookline.
- Durable stainless front, sides & shelf plus 6" adjustable legs for easy leveling on any surface.
- Front-mounted manual gas shut-off and factory pressure regulator simplify installation & service.
- CSA certified & NSF listed—meets health, safety and sanitation standards.
- Backed by a 1-year parts & labor warranty with nationwide Southbend service support.
Performance at a Glance
| Total input | 326,000 BTU/hr (Natural Gas) |
|---|---|
| Open burners | 6 × 33,000 BTU cast-iron non-clog |
| Charbroiler | 24" radiant, 64,000 BTU |
| Ovens | 2 convection, 32,000 BTU each • 115 V blower motors (5.9 A total) |
| Cooking surface | 60 3⁄4" W × 27" D • 37" working height |
| Exterior dimensions | 60 3⁄4" W × 34" D × 59 1⁄2" H (to top of flue) |
| Oven interior (ea.) | 26" W × 24" D × 14" H, porcelain-enameled |
| Gas connection | 3⁄4" NPT, rear • 7" WC min. inlet (natural gas) |
| Certifications | CSA • NSF |
Why Operators Love the Ultimate Series
- All-purpose versatility—sauté, boil, grill, roast and bake without adding extra equipment.
- Porcelain-coated, coved-corner ovens for superior airflow and quick wipe-down cleanup.
- High-efficiency ½ hp convection motors with on/off switches let you use ovens as standard or forced-air.
- Field-configurable with optional salamander or cheesemelter mounts, flue riser heights and caster sets (sold separately).
Important care tips:
• Never allow cookware to extend over the front rail—excess heat can damage components.
• Do not place sheet pans over charbroiler grates while burners are on; reflected heat can cause irreparable damage.
• Never allow cookware to extend over the front rail—excess heat can damage components.
• Do not place sheet pans over charbroiler grates while burners are on; reflected heat can cause irreparable damage.
Intended for commercial use only. Warranty: 1-year parts & labor (see Southbend Limited Warranty for full details).
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 22 reviews
Sort
Product Reviews
★★★★★ 5
Great product
Style: Modifier
Noticed a more smooth engine idle and less tick noise in my Tacoma. Is a win
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 1, 2026
★★★★★ 5
My 2018 Mustang GT BBQ Tick went away but came back.
Style: Modifier
Update 1-26-2019:
The BBQ/Typewriter tick came back this morning. So, I'd say that if you're trying to use the Ceratec to quiet the tick, it will work for a little while, but will eventually return. I don't think there's anything else that can be done to quiet the tick and it's a crap shoot if you get it serviced. In my case, it only ticks during warm up after the transition from high idle, and goes away completely once the entire engine is fully warmed up, so I'm just going to live with it. I'm still giving the Ceratec a 5 because it did reduce my friction enough for a small MPG improvement, so I believe it works as advertised and I'm not going to blame them for not silencing the tick.
Update 1-20-2019:
After a few days with only the one bottle poured in, my tick came back. Since one bottle is only 1/2 the recommended concentration for the 10 quarts in a 2018 Mustang GT, I bought another bottle and added it and the tick is now gone again. We'll see if it lasts. I can tell you that my fuel economy has improved. I have a little over 11,000 miles now and I always display my fuel economy meter and I use it. I've never reset my average fuel economy meter since the day I bought the car new. I've been pretty well stuck at 21.6 MPG for the last couple months. Since I've put in the Ceratec, my average fuel economy has increased to 21.8 MPG, so it's jumped 0.2 MPG in roughly 2 weeks. With over 11,000 miles included in the average, it takes a pretty significant improvement in friction to make that average move that much in that short a time. Even if my tick comes back again, I'm sold on Ceratec for the friction reduction alone. I'll update the review again if the tick comes back.
Original Review:
My 2018 Mustang GT developed the infamous BBQ/Typewriter tick immedaitely after my first oil change. I used Mobil One synthetic at 3500 miles on my first oil change. I did my 2nd oil change at 10K miles with Mobile One, but the tick was still present. After seeing people on YouTube having success eliminating their tick with Ceratec and after reading the one other review of a 2018 Mustang GT owner here on Amazon, I decided to try it.
I ordered 1 bottle. It arrived on a Friday and poured it in immediately after I got home from work. It's an hour drive one way to work, so the engine was at operating temperature, where, in my case, the tick goes away. I only get it when the engine switches from high idle to normal idle after a cold start and the tick is quite loud for at least the 15 minutes it takes for me to get to the drive through where I get my morning coffee, where I can really hear the tick echoing off the wall.
After pouring it in, I started the car and let it idle, but didn't really notice any change. I then took it for a drive and did some hard pulls to get the engine to rev under load to the red line. After that, I put the car in the garage until I drove to work on Monday.
When I went to the drive through to get my morning coffee, there was no tick! It was gone! I listened real hard, but all I could hear was the normal direct injector pump noise. Then, after my hour long drive to work, I left car running and got out to listen. With the hood closed, it was quieter than at any time since I bought it. It was virtually silent. Even the DI pump noise was barely audible. The car also sounded and felt different during the drive to work. The engine seemed like it was smoother somehow. It might have been my imagination, but after the silence in my parking spot at work, I wouldn't be surprised if the engine did run smoother.
At any rate, I only used 1 bottle to treat the 10 quarts of oil, which is half the amount the mfg says to use. So, I'll see how long it lasts, but it definitely worked even at half its normal concentration. I highly recommend it for anyone who has the 2018 Mustang GT tick.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 14, 2019
★★★★★ 5
Must have in modern high compression GDI engines!
Style: Modifier
So bought this for my new Mazda 3 Turbos' first oil change. I was originally going to use Liqui Moly MoS2, due to the OE Mazda oil using a very high Moly PPM (800ish) formula and not having easy access to a similarly formulated oil. After doing some more reading i decided to use Ceratec instead, mostly because it doesn't make the oil look super dark (for warranty purposes, If for some reason i do have a problem with the engin i don't want the dealer saying I just didn't change my oil). So initial results are awesome, the valve noise is pretty much gone. And the engin just feels smoother, and sounds like is not even trying when reving it out. With that success I bought another one for my girlfriends non turbo CX30 when i changed her oil. Her engine has always been just a little noisier than my old non turbo mazda 3, and my new Turbo model. I've used the same oil in both (Pennzoil Ultra Platinum 0w20 or 5w30 in the turbo). It had the normal lifter noise, but it always sounded raspy when accelerating hard, like it was really at the edge when floored. So as a before and after test I changed the oil fist with NO Ceratec, engin sounded happier, ran a little smoother, but basically the same as before, Normal stuff after an oil change. So I added the Ceratec, literally you could hear the lifter noise melt away as it mixed with the oil, I was in my garage so the effect was even more stark. The engine also idled smoother, to the point if you were in the car, you wouldn't know it was on without the engine RPM readout. So i took it for a test drive down the road and stepped on it after getting it up to Temp. The raspiness was completely gone, it sounded like it was happy as a clam reving right up to redline. This wasn't a "i think it might be better" differance, it was a night and day difference, a wow that impressive difference. As for fuel consumption reduction claims, i don't know yet, from what i read you need to dive it 300-400 miles to get a valid result. I only have 150ish on mine and 75 on hers. First impressions were really positive, highly recommend to anyone wanting to keep a car for a really long time. Only downside is the price, this stuff is really expensive... but i look at it
like this, $600 over the life if the vehicle if you keep it to 150K miles, with 6k oil change intervals is pretty cheap insurance. compared to an engine rebuild.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 21, 2021
★★★★★ 4
Results after 1500 miles....
Style: Modifier
Seems to have made my engine a little less noisy at startup.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 3, 2026
★★★★★ 5
Been Using For a good While
Style: Modifier
Always quality product
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026