Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 13 - Jul 18
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Sennheiser MZA 900 P-4Sennheiser MZA 900 P 4 Phantom Power Adapter The Sennheiser MZA 900 P 4 (Article Number: 500226) is a professional, high performance active inline phantom power adapter. It is engineered to connect pre polarized electret condenser microphonesspecifically those configured with a special 3 pin connector (LEMO compatible SE pinout)directly to standard, balanced studio and live sound equipment that provides regular 12V to 48V phantom power. The "P 4"
Sennheiser MZA 900 P-4 Phantom Power Adapter
The Sennheiser MZA 900 P-4 (Article Number: 500226) is a professional, high-performance active inline phantom power adapter. It is engineered to connect pre-polarized electret condenser microphones—specifically those configured with a special 3-pin connector (LEMO-compatible SE pinout)—directly to standard, balanced studio and live sound equipment that provides regular 12V to 48V phantom power.
The "P-4" designation specifies its factory input jack configuration: a specialized 3-pin lockable socket. This makes it an essential utility tool for adapting high-end lavalier and headset microphones (like the MKE 1, MKE 2-4, and HSP 4) away from their usual wireless bodypack transmitters and converting them into wired, balanced XLR microphones.
Key Operational and Engineering Attributes
-
Active Signal & Impedance Conversion: The internal circuitry steps down high-voltage studio phantom power (12V - 48V) to the lower bias voltage required by miniature capsule elements. Simultaneously, it transforms the high-impedance unbalanced capsule signal into a low-impedance, fully balanced audio stream.
-
Switchable Acoustic Tailoring (Bass Roll-Off & Pad): Outfitted with a three-position mechanical micro-slide switch located on its side. It allows sound technicians to run the adapter completely flat, apply a targeted low-cut filter to combat low-frequency stage rumble or wind noise, or engage a -12 dB attenuation pad to prevent capsule overload from high-SPL sound sources.
-
Military-Grade RF and Structural Shielding: Housed in a rugged, impact-resistant solid metal chassis. It acts as a complete Faraday cage, shielding the sensitive, unamplified microphone signal against radio frequency interference (RFI) emitted by smartphones, stage lighting dimmers, and wireless intercom systems.
-
Integrated Hardware Monitoring LED: Features an integrated, multi-color micro-LED indicator on the front panel. It lights up solid green when stable phantom power is being received from the mixing console or audio interface, providing immediate visual troubleshooting on dark stage layouts.
Technical Specifications Matrix
| Feature Parameter | Hardware Specification Profile |
| Model Reference Name | MZA 900 P-4 |
| Official Article Number | 500226 |
| Global Trade Product Code (UPC) | 615104101340 |
| Input Interfacing Socket | 3-Pin Special SE Connector (LEMO-compatible style) |
| Output Interfacing Plug | XLR 3-Pin Male (Fully balanced, low-impedance layout) |
| Acceptable Supply Phantom Power | P12 to P48 V (Self-regulating bias scaling) |
| Internal Audio Frequency Response | 20 Hz to 20,000 Hz |
| Nominal Source Output Impedance | 100 Ohms |
| Minimum Terminating Impedance | 5,000 Ohms |
| Gain Calibration Settings | Switchable: 0 dB / -12 dB Preattenuation Pad |
| Integrated Low-Cut Filter | Switchable: Flat / Roll-off at 125 Hz (-3 dB point, 12 dB/oct) |
| Physical Housing Profile | Heavy-duty machined aluminum composite with steel belt clip |
| Product Dimensions Array | 19 mm (Diameter) x 100 mm (Total Body Length) |
| Net Hardware Weight | Approx. 60 grams (2.12 oz) |
In the Box: Production Component Inventory
-
1 x Sennheiser MZA 900 P-4 Active Phantom Power Adapter
-
1 x Integrated Heavy-Duty Steel Belt Clip
-
1 x Instruction & Calibration Manual
Field Configuration and Application Advice
Configuring the Filter Switch Elements: To customize the adapter's performance for your specific environment, locate the micro-slide switch on the side of the metal barrel.
-
Position 1 (Straight Line): Provides a completely flat, full-bandwidth tracking signal—ideal for studio recordings and capturing quiet instruments.
-
Position 2 (Bent Line): Engages the 125 Hz roll-off filter to instantly clean up low-end room rumble or clothing friction.
-
Position 3 (-12 dB): Attenuates the incoming signal before it hits your mic preamp—perfect for high-energy theatrical performances or close-miking loud sound sources.
Proper Cable Management and Connection Order: When integrating this adapter into a production chain, always plug your miniature 3-pin microphone cable securely into the locking socket of the MZA 900 P-4 before sending 48V phantom power down the main XLR line from your mixing console. Connecting or disconnecting the delicate 3-pin microphone head while the circuit is actively powered can cause loud electrical pops and subject the capsule to brief voltage spikes that may degrade the element over time.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy