SKU: 55982982904

Mr. Gasket Windage Tray & Gasket - 61100G

$114.26 $126.95
Save 10%
No.2 Bestseller on tworldvietnam.com >

Pay in installments of $31.74 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 18 - Jul 23

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Mr. Gasket Windage Tray & Gasket - 61100GOverview: This windage tray includes molded rubber gaskets on the top and bottom for a one piece design. The windage tray is made from glass filled nylon & molded rubber (modern materials that hold up to heat & oil). The molded rubber gaskets don't need any RTV (room temperature vulcanizing), so future service is easy (no scraping off old gaskets and replacing them each time the oil pan is removed). The re usable windage tray gasket can be washed with

Overview:

This windage tray includes molded rubber gaskets on the top and bottom for a one-piece design. The windage tray is made from glass filled nylon & molded rubber (modern materials that hold up to heat & oil). The molded rubber gaskets don't need any RTV (room temperature vulcanizing), so future service is easy (no scraping off old gaskets and replacing them each time the oil pan is removed). The re-usable windage tray / gasket can be washed with soap & water. Made in the USA.

Features:

  • Combination Windage Tray & Oil Pan Gasket for Big Block Chrysler / Mopar
  • Fits 383, 400, 413, 426W, 440 & 426 Hemi
  • Made From Glass Filled Nylon w/ Molded Rubber Gaskets
  • Choose From 2 Sizes - Up to 3.75" Stroke, or Up to 4.15" Stroke
  • Reusable - Wash w/ Soap & Water
  • Eliminates Hassle to Scrape Off Old Gaskets & Cost to Replace the (2) Paper Gasket w/ Metal Windage Trays
  • Gasket Works Best on Oil Pans w/ a Smooth Pan Rail (no Dimples in the Stamped Oil Pan)
  • Made in the USA

 

Application:

Year Make Model Submodel Engine Size
1963 - 1971 Chrysler Town & Country 383/6.3 V8
1967 - 1974 Dodge Charger 440/7.2 V8
1966 - 1977 Chrysler Town & Country 440/7.2 V8
1972 - 1977 Chrysler Town & Country 400/6.6 V8
1963 - 1964 Dodge 330 383/6.3 V8
1966 - 1971 Dodge Charger 383/6.3 V8
1963 - 1964 Dodge 440 383/6.3 V8
1972 - 1978 Dodge Charger 400/6.6 V8
1974 Dodge B100 Van 440/7.2 V8
1971 - 1974 Dodge B200 Van 400/6.6 V8
1965 - 1971 Dodge Coronet 383/6.3 V8
1967 - 1976 Dodge Coronet 440/7.2 V8
1971 - 1974 Dodge B300 Van 400/6.6 V8
1974 Dodge B300 Van 440/7.2 V8
1970 - 1972 Dodge Challenger 440/7.2 V8
1972 - 1976 Dodge Coronet 400/6.6 V8
1972 - 1974 Dodge Challenger 400/6.6 V8
1968 - 1971 Dodge D100 Pickup 383/6.3 V8
1973 - 1974 Dodge D100 Pickup 440/7.2 V8
1971 - 1974 Dodge D100 Pickup 400/6.6 V8
1967 Dodge D100 Series 383/6.3 V8
1968 - 1971 Dodge D200 Pickup 383/6.3 V8
1971 - 1974 Dodge D200 Pickup 400/6.6 V8
1967 Dodge D200 Series 383/6.3 V8
1968 - 1971 Dodge D300 Pickup 383/6.3 V8
1966 - 1975 Chrysler Imperial 440/7.2 V8
1966 - 1978 Chrysler New Yorker 440/7.2 V8
1965 - 1971 Chrysler Newport 383/6.3 V8
1966 - 1978 Chrysler Newport 440/7.2 V8
1972 - 1978 Chrysler Newport 400/6.6 V8
1963 - 1965 Dodge 880 383/6.3 V8
1974 Dodge B200 Van 440/7.2 V8
1970 - 1971 Dodge Challenger 383/6.3 V8
1976 - 1978 Dodge B200 400/6.6 V8
1975 - 1978 Dodge B200 440/7.2 V8
1975 - 1978 Dodge B300 440/7.2 V8
1976 - 1978 Dodge B300 400/6.6 V8
1971 - 1974 Dodge W100 Pickup 400/6.6 V8
1965 - 1971 Dodge Monaco 383/6.3 V8
1966 - 1978 Dodge Monaco 440/7.2 V8
1968 - 1971 Dodge W200 Pickup 383/6.3 V8
1971 - 1974 Dodge W200 Pickup 400/6.6 V8
1973 - 1974 Dodge W200 Pickup 440/7.2 V8
1972 - 1978 Dodge Monaco 400/6.6 V8
1972 - 1974 Dodge D300 Pickup 440/7.2 V8
1963 - 1971 Dodge Polara 383/6.3 V8
1971 - 1974 Dodge D300 Pickup 400/6.6 V8
1966 - 1973 Dodge Polara 440/7.2 V8
1967 Dodge D300 Series 383/6.3 V8
1967 - 1969 Dodge Dart 383/6.3 V8
1968 - 1971 Dodge W100 Pickup 383/6.3 V8
1973 - 1974 Dodge D200 Pickup 440/7.2 V8
1963 - 1966 Chrysler 300 383/6.3 V8
1966 - 1971 Chrysler 300 440/7.2 V8
1967 - 1971 Plymouth Barracuda 383/6.3 V8
1971 - 1972 Plymouth Barracuda 440/7.2 V8
1963 - 1970 Plymouth Belvedere 383/6.3 V8
1963 Plymouth Fleet Special 383/6.3 V8
1966 - 1967 Plymouth Belvedere 440/7.2 V8
1963 - 1971 Plymouth Fury 383/6.3 V8
1970 - 1971 Plymouth Cuda 383/6.3 V8
1970 - 1972 Plymouth Cuda 440/7.2 V8
1966 - 1978 Plymouth Fury 440/7.2 V8
1968 - 1971 Plymouth Fury I 383/6.3 V8
1968 - 1974 Plymouth Fury I 440/7.2 V8
1968 - 1971 Plymouth Fury II 383/6.3 V8
1968 - 1974 Plymouth Fury II 440/7.2 V8
1972 - 1978 Plymouth Fury 400/6.6 V8
1972 - 1974 Plymouth Fury II 400/6.6 V8
1968 - 1971 Plymouth Fury III 383/6.3 V8
1968 - 1974 Plymouth Fury III 440/7.2 V8
1972 - 1974 Plymouth Fury I 400/6.6 V8
1972 - 1974 Plymouth Fury III 400/6.6 V8
1975 - 1978 Chrysler Cordoba 400/6.6 V8
1975 - 1978 Chrysler New Yorker 400/6.6 V8
1972 - 1975 Plymouth Road Runner 400/6.6 V8
1969 - 1974 Plymouth Road Runner 440/7.2 V8
1967 - 1971 Plymouth GTX 440/7.2 V8
1974 Plymouth PB200 Van 440/7.2 V8
1965 - 1971 Plymouth Satellite 383/6.3 V8
1974 Plymouth PB300 Van 440/7.2 V8
1968 - 1971 Plymouth Road Runner 383/6.3 V8
1972 - 1974 Plymouth Satellite 400/6.6 V8
1966 - 1974 Plymouth Satellite 440/7.2 V8
1963 - 1964 Plymouth Savoy 383/6.3 V8
1970 Plymouth Superbird 440/7.2 V8
1974 - 1978 Plymouth Trailduster 440/7.2 V8
1967 Plymouth VIP 440/7.2 V8
1967 Plymouth VIP 383/6.3 V8
1977 - 1979 Dodge CB300 440/7.2 V8
1976 - 1978 Dodge CB300 400/6.6 V8
1975 - 1978 Dodge D100 440/7.2 V8
1976 - 1978 Dodge D100 400/6.6 V8
1977 - 1978 Dodge D150 400/6.6 V8
1978 Dodge D150 440/7.2 V8
1975 - 1978 Dodge D200 440/7.2 V8
1975 - 1978 Dodge D200 400/6.6 V8
1975 - 1978 Dodge D300 440/7.2 V8
1976 - 1978 Dodge D300 400/6.6 V8
1978 Dodge Magnum 400/6.6 V8
1974 - 1978 Dodge Ramcharger 440/7.2 V8
1975 - 1977 Dodge Royal Monaco 440/7.2 V8
1975 - 1977 Dodge Royal Monaco 400/6.6 V8
1977 - 1978 Dodge Ramcharger 400/6.6 V8
1977 - 1978 Dodge W150 400/6.6 V8
1975 - 1977 Dodge W100 400/6.6 V8
1975 - 1977 Dodge W100 440/7.2 V8
1978 Dodge W150 440/7.2 V8
1975 - 1978 Dodge W200 440/7.2 V8
1976 - 1978 Dodge W200 400/6.6 V8
1975 - 1978 Dodge W300 440/7.2 V8
1976 - 1978 Dodge W300 400/6.6 V8
1972 - 1977 Plymouth Gran Fury 440/7.2 V8
1972 - 1977 Plymouth Gran Fury 400/6.6 V8
1968 - 1971 Dodge W300 Pickup 383/6.3 V8
1972 - 1974 Dodge W300 Pickup 440/7.2 V8
1971 - 1974 Dodge W300 Pickup 400/6.6 V8
1967 Dodge W300 Series 383/6.3 V8
1972 - 1973 Dodge Polara 400/6.6 V8
1973 - 1974 Dodge W100 Pickup 440/7.2 V8
1967 Dodge W100 Series 383/6.3 V8
1967 Dodge W200 Series 383/6.3 V8
1976 - 1978 Plymouth PB200 440/7.2 V8
1976 - 1978 Plymouth PB200 400/6.6 V8
1976 - 1978 Plymouth PB300 400/6.6 V8
1976 - 1978 Plymouth PB300 440/7.2 V8
1977 - 1978 Plymouth Trailduster 400/6.6 V8
1968 - 1971 Plymouth GTX 383/6.3 V8

 

Specs:

Application 1963-1978 Mopar B/RB 361-440 & Stock 426 Hemi
Brand Mr. Gasket
Emission Code 5
Engine Chrysler Big Block B/RB
Engine Chrysler Hemi (Gen II)
Finish Black
Maximum Stroke 3.75"
Oil Pan Gasket Material Molded Rubber w/ Nylon Carrier
Oil Pan Type Smooth Rail
One Piece Oil Pan Gasket Yes
Product Type Oil Pan Accessories
Rear Main Seal Style Two Piece
Thickness .100"
Warranty Limited 90 Day
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 55982982904

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 28 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
D
Verified Purchase
D. Smith
Fort Morgan, US
★★★★★ 5
Hands down, the BEST handheld frother I've ever used!
Color: Black
Hands down, the BEST handheld frother I've ever used! I got the black one, but any color will have the same results. Over the past 12 years or so, I've used so many different handheld frothers and they've ALL fallen short of expectations for quality, longevity, power, features, and usability. I've used everything from cheap, $15 models to $50+ models and everything in-between. Some with fancy attachments for various types of mixing, frothing, beating, whipping, etc. Some with rechargeable batteries, some without. Some AC powered, some with fixed whisks, some with detachable/replaceable whisks, some with stands, etc. NONE have been spectacular. Most broke within 6 months and got tossed. ALL were major disappointments in the end, including the "revered" Zulay models of which I tried several. I finally found this Maestri House branded, variable speed frother with detachable / replaceable whisks and got one to try. I was literally on Cloud Nine the first time I turned it on. Like, WOW! Not only was it FAST on the highest speed, but it was powerful enough to churn right through milk, eggs, cream, etc, without bogging down like many others. This thing makes milk froth like a milkshake and Matcha Lattes like nothing else I've ever experienced. I used to have to sift my Matcha, then whisk it in hot water, then froth milk and then blend them together to make the perfect latte. and if the milk was cold (my preference), pre-whisking in hot water was a must to avoid lumps. However, with THIS frother? I literally pour my milk into a tall tumbler, drop in un-sifted Matcha powder, and spin up the Maestri House frother at first on a medium low speed to get it mixed, then jump straight to the highest speed to really whip that milk and match up. After about 30-45 seconds, I've got the thickest, richest, smoothest, most aerated latte around. And NO LUMPS at all!!! What a time and dish saver! And cleaning? I just run it under hot running water to get the shaft cleaned and then spin it up in a dish with hot running water for a few moments, then spin it on high for a few seconds in the air to dry it off instantly. Now, I'll be honest here, too. The specs say it can go months on a charge, using it for a couple minutes a couple times daily. Well, I guess it could do that and still spin. But I use it FULL SPEED, churning hard for at least a minute a couple times per day. After about 2 weeks, I can start to notice a speed reduction so I just plug it back in on the charger. All things considered, this is still better than all the other handheld frothers I've used over the years. After using the heck out of this thing for the past 7 months, I've even decided to start selling these in our Japanese gift shop. The manufacturer is has been very responsive both in customer support (I called them about an issue I thought I was having, and they called me back with a couple hours even though I didn't leave voicemail when they didn't answer right away) and in reseller support. I have to give these guys an A+ for responsiveness and quick resolution when problems might arise. HIGHLY recommended!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 17, 2025
H
Verified Purchase
Hawaii Keith
West Palm Beach, US
★★★★★ 5
Great Addition!
Color: Black
Why did you pick this product vs others?: I just started a powdered drink routine recently and was having a difficult time mixing it with water. I would consistently end up with small nuggets of mix making it unenjoyable to drink. I knew I needed a mixer and was glad I found this device when I did. It works perfectly! I like the fact that it comes with its own stand and included two mixing heads. It is solid, well-designed, and you can feel the quality when you pick it up. The variable speed of the mixer is perfect for ensuring that everything is blended well. I haven’t used it to “froth” anything yet, at least not on purpose, but I accidentally found out that it can do that well. This is a great addition to our kitchen and is very easy to wash after use. So far…no issues. Highly recommend for those of you looking for the right tool to make sure those protein mixes aren’t full of unmixed nuggets.  
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 21, 2025
S
Verified Purchase
Suzi blue
New York, US
★★★★★ 4
Low foam
Color: Black
Love this frother. It is great quality and the turn speed is amazing. My only issue is this. It comes w 2 wands and they are both singles. The single is great for stirring things up. It does not make a lot of froth and for some things it’s perfect but sometimes I like a lot of froth and I wish it either came w a single and a double or you could purchase a double separately to intermix. I don’t want to buy a whole other unit just for the double. I wrote to them bc the double frother they sell doesn’t look as good as this one but sometimes a girl needs a lot of foam and sometimes th stirring is perfect.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 20, 2026
H
Verified Purchase
Hanna
San Leandro, US
★★★★★ 5
Still The Best Frother Ever!
Color: Black
I love how it is easy to use, how it holds a charge, and how much power it has. I've only charged it once since I got it & I've been using it on a daily basis!!! Though it isn't a long time, I'm happy with it so far! I definitely will recommend it to anyone looking for a great frother. If you are looking for one, look no further! You won't be disappointed! I've read some comments where they found it to be too strong that their drink spilled everywhere. But for me I have not had any incident of spilling over. I have used it both for my coffee and my matcha tea and it worked great without any spilling over. You just have to start with the lowest power and ensure that you have a large enough container to have a room for your frothing. My sister tried to use it recently during her visit to make us matcha tea. However, she experienced spillage all over the cup, because she had used a small cup. Otherwise, she liked it very much and said she will get one when her battery operated one stops working... Another thing I like about the product was the customer service that I had received. When I got my first order which came quickly, it wasn't working after having charged it over 24 hours. It was not turning on at all. I returned it and ordered a replacement which I received within a day or two. This time after charging it for the recommended amount of time, I was a bit skeptical when I turned it on. However, I was pleasantly surprised that it worked like it was supposed to and it has been working ever since having charged it only once so far. I may come back and give an update depending on how it does after 6 months of use, so keep in tune... I don't know if there is a way to write a new entry as a follow up to the old entry, so I'm going to add my follow up comment over here. May 23, 2025 - I love my frother more than I can say in words. It's functionality has not changed a bit from the time I have purchased it. It charge lasts several weeks to few months before I charge it again and the power is still the same. Recently I decided to buy another one for my office use. I like the white color and so tried it but that one wouldn't even turn on. And then I got a gray one to have a different color. That one was much weaker than the black one I own. Then I replaced it with another gray one within few days. I tried it and it was exactly the same as the one I already replaced. So then I decided to go with a black one again hoping that it would be the same as the one I have. The black one did much better than the gray ones in the strength or power of the frother. However, it is weaker than the one I already have been using since last August. While I am not very happy with the quality being inconsistent in all of the ones I have tried including the recent pictures of the black one, I have decided to keep the black one because it is relatively better than the gray ones I tried. What I don't understand is why there is inconsistency in the quality of the same product by the same maker. I am beginning to wonder if the black one I purchased in Augusta last year was anomaly of a quality and a good way. Maybe I lucked out on my older black frother, but I'm unsure if quality is going to get better if I were to order another one. I have a sister who is a pro in making coffee drinks and she was the reason I had ordered this frother to begin with. She uses a battery operated one at this time and I have been thinking about getting her one like mine. While I am still skeptical, I am going to give it a shot and order her one sometime soon. If it doesn't work, I guess we will return it back. But one thing that I am grateful is that I have been able to return every one of those that I have tried recently with no issues. I hope that I don't have to return my most recent purchase in black. I was not even able to review the new purchase because of the item being the same color which is crazy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 8, 2024
R
Verified Purchase
R. Cordosi
Waukegan, US
★★★★★ 5
Outstanding Frother!
Color: Space Gray
Exceptional! This frother is in another league compared to the cheapo push button frothers. The motor is smooth, quiet and powerful. This has an intuitive thumb dial on top that operates smoothly with a wide range of smooth speed adjustment. It’s gentle enough to froth a little bit of milk for a macchiato and powerful enough to scramble 3 eggs. The head is removable for easy cleaning. It’s also rechargeable. I charged this the day I bought it on April first. I use it at least twice a day. It’s September 26th today and I have yet to recharge it and it’s not showing any signs of needing a charge. One minor quibble is that they give you 2 of the same frother heads. They are built so well, that I don’t imagine it ever wearing out. It would have been nice to get a whisk or something different. Not a deal breaker at all though.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 26, 2025

recommand products

Twist drills / Solid carbide / Ø 3.170 mm / Company std. / Type N / bright
61.32
Twist drills / Solid carbide / Ø 3.300 mm / Company std. / Type N / bright
47.56
10K 5.5MM YELLOW GOLD HOLLOW PAVE CURB 16" CHAIN NECKLACE (AVAILABLE IN LENGTHS 7" - 30")
640.00
14K 5.5MM YELLOW GOLD HOLLOW PAVE CURB 24" CHAIN NECKLACE (AVAILABLE IN LENGTHS 7" - 30")
1740.00
Micro-precision drills / Solid carbide / Ø 0.200 mm / Company std. / Type N / bright
23.37