Blackmagic Design Spares - DaVinci Mini Panel Knob Cap Kit

The Blackmagic Design Spares - DaVinci Mini Panel Knob Cap Kit is a complete set of replacement caps for the high-resolution rotary encoders found on the DaVinci Resolve Mini Panel. These knobs are the primary way a colorist adjusts specific software parameters—such as Lift/Gamma/Gain, Saturation, and Contrast—without looking away from the reference monitor.

Kit Components and Design

The Mini Panel features two distinct types of knobs. This kit typically includes replacements for both:

• Primary Parameter Knobs: The 8 smaller knobs located directly below the two high-resolution LCD screens. These are used for menu navigation and adjusting the soft-key parameters shown on the display.

• Primary Adjustment Knobs: The larger, weighted knobs used for the primary color correction tools.

• Material: High-quality plastic with a "soft-touch" rubberized coating, designed to provide maximum grip and a premium tactile feel.

• Top Finish: Usually features a reflective or brushed-metal top inlay to assist with visibility in low-light grading suites.

Why You Might Need This Kit

Because colorists spend thousands of hours with their hands on these controls, the knobs are subject to specific types of wear:

• "Tacky" or Sticky Surface: Over several years, the rubberized coating on the original knobs can break down (due to humidity or skin oils), becoming sticky or unpleasant to touch.

• Wobble or Looseness: If a knob is bumped or snagged during a move, the internal plastic "D-shaft" mounting can crack, causing the knob to sit crooked or feel loose on the encoder.

• Lost Caps: During intensive cleaning or transportation of the panel, caps can occasionally pop off and be misplaced.

• Cosmetic Consistency: If one knob becomes damaged, replacing the entire set ensures that the texture and "grip" remain consistent across the entire panel, which is vital for muscle memory.

Key Features

• Genuine OEM Spare: Guaranteed to have the correct "D-shape" internal bore to fit the encoders without slipping.

• Weighted Calibration: Designed to work with the internal damping of the Mini Panel's encoders, ensuring the knob doesn't feel too light or "plasticky."

• Tool-less Installation: These are friction-fit parts. They can be removed by pulling straight up and installed by pressing firmly onto the encoder shaft.

Professional Maintenance Tips

Replacing your knob caps is an excellent time to perform a "tune-up" on your Mini Panel:

• Encoder Cleaning: Once the old cap is removed, use a small amount of compressed air to blow out any dust from the base of the encoder shaft. Avoid spraying liquids directly into the shaft.

• The "Pull" Technique: If a knob is stuck, do not use a screwdriver to pry it up, as this will scratch the beautiful finish of the panel. Instead, use a piece of strong string or a "shoelace" looped under the knob to pull it straight upward.

• Alignment: Ensure the "D" shape of the shaft matches the internal hole of the new cap before pushing down. Forcing it on in the wrong orientation will permanently damage the plastic mounting.

• Shaft Inspection: If a knob still feels loose after replacing the cap, inspect the metal encoder shaft itself. If the metal is bent, the entire encoder component may need service rather than just a new cap.

Are the original knobs on your panel becoming sticky, or are you replacing them due to physical damage? Tightening up the "feel" of these knobs can significantly improve the speed of your grading sessions.