SKU: 65078647630

Blackmagic Design Spares - Camera Studio Pro - PCB Main 4K G2

Sale price$7768.71 Regular price$8631.90
Save 10%

Pay in installments of $2157.97 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 31 - Aug 5

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Blackmagic Design Spares - Camera Studio Pro - PCB Main 4K G2the Blackmagic Design Spares Camera Studio Pro PCB Main 4K G2 is the primary motherboard for the second generation 4K Studio Camera. While it shares the same external housing as the 6K Pro version, the 4K G2 board is specifically engineered for the 4K sensor's data rates and utilizes a different processing architecture. This board is the "central hub" for the camera, managing everything from the 12G SDI video output to the remote control logic used in

the Blackmagic Design Spares - Camera Studio Pro - PCB Main 4K G2 is the primary motherboard for the second-generation 4K Studio Camera. While it shares the same external housing as the 6K Pro version, the 4K G2 board is specifically engineered for the 4K sensor's data rates and utilizes a different processing architecture.

This board is the "central hub" for the camera, managing everything from the 12G-SDI video output to the remote control logic used in live broadcast environments.


Core Responsibilities

The 4K G2 Main PCB is optimized for low-latency live production:

  • Image Processing: Houses the FPGA that handles the 4K sensor's debayering and applies Blackmagic's Gen 5 Color Science.

  • 12G-SDI & HDMI Output: Manages the high-speed video transmitters that send a $2160\text{p}60$ signal to switchers or monitors.

  • Tally & Talkback Integration: Processes the SDI "Return" feed to extract tally light triggers and handles the 5-pin XLR talkback communication between the operator and the director.

  • Camera Control Protocol: Interprets commands from ATEM switchers (such as iris, gain, shutter, and color grading) and applies them to the sensor and lens in real-time.

When to Replace the Main PCB

As the most expensive electronic component in the camera, replacement is typically only necessary following a catastrophic event:

  • SDI Port "Fried": 12G-SDI ports are sensitive to "ground loops." If a monitor and the camera are powered from different sources and connected via SDI, a voltage spike can burn out the SDI driver chip on the Main PCB.

  • PoE++ Power Failure: If the 10G Ethernet port (used for Power over Ethernet) receives a surge from a faulty network switch, it can destroy the power regulation stage of the motherboard.

  • Total System Hang: The camera is stuck on the splash screen or the 7-inch LCD remains black while the tally light or internal fans are active.

  • Audio/Talkback Failure: If the professional audio inputs (XLR) or the talkback system develop permanent digital noise or stop functioning entirely.


Key Features

  • Genuine OEM Part: Built to the exact specifications of the 4K G2, ensuring 100% compatibility with the camera's internal wiring and cooling system.

  • Dual Power Logic: Supports seamless switching between the 12V DC 4-pin XLR input and the 10G Ethernet PoE++ input.

  • Integrated Connectors: The 12G-SDI, HDMI, and 10G Ethernet ports are surface-mounted directly to the board for maximum signal stability and durability.


Technical Installation Note

DANGER: Level 4 (Expert) Repair. Replacing this board requires a near-total teardown of the unit.

  1. Thermal Interface: The 4K G2 generates significant heat during $4\text{K}60$ operation. You must replace all thermal pads or apply fresh thermal paste to the main processing chips before securing the board to the internal heat sink. Failure to do so will result in the camera shutting down within minutes.

  2. Ribbon Cable Care: The Studio Camera uses several wide, fragile ribbon cables to connect the 7-inch screen and the side control panels to the Main PCB. These connectors have delicate locking tabs that are easily snapped.

  3. Firmware Matching: After installation, you must connect the camera to a computer via USB-C and run the Blackmagic Camera Setup utility. The new board will likely require a firmware update to synchronize with the sensor's calibration data.

  4. Static Discharge (ESD): Always work on an anti-static mat. The high-speed 12G-SDI and 10G Ethernet circuits are extremely vulnerable to static electricity.

Expert Advice: If your camera is unresponsive, always test it with a 4-pin XLR DC power supply before assuming the board is dead. Many "board failures" in the Studio line are actually caused by a network switch failing to provide the full PoE++ wattage required by the 4K G2's high-brightness screen and processor.

Is your camera failing to power on entirely, or is it just failing to output a signal via the SDI ports?

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 65078647630

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 15 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
D
Verified Purchase
D0UG
Chelsea, US
★★★★★ 3
Not fast dissolve. After 20 minutes, it still sits beneath my tongue.
Flavor Name: Peppermint
This is definitely not fast dissolving tablets. My B12 and biotin sublingual tablets dissolve in a couple of minutes but these pills last over 20 minutes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 8, 2022
D
Verified Purchase
Dilianny Leyva Brito
Birmingham, US
★★★★★ 5
Good supplement for uric acid support
My dad has been using this support supplement for uric acid for a while and I thought it was a good option. The ingredients feel of quality and are easy to take, as the capsules are of adequate size and do not cause stomach discomfort. I like that it is also focused on kidney support and that it does not have a strong taste or noticeable side effects in my case. It is a convenient alternative to complement a balanced diet and healthy habits. The value for money is good and the packaging performs a lot. In general, I am satisfied with the product and would buy it again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 26, 2026
K
Verified Purchase
khat
Natrona Heights, US
★★★★★ 5
Great gout relief!
Great ingredients, great price and very effective product. I have gout and had frequent very painful gout attacks, at least several times a year for the past 5 years. By taking the Uric Acid Support Formula in the past year and a half, 2 tablets per day as instructed on the bottle, when I feel an attack coming on, I’ve been able to stop a full attack several times, and have had less than 4 full blown attacks since I began using it. In all fairness, I do also increase my water intake, and often add a celery seed tincture, and simply my diet. Still, adding this Uric Acid formula in conjunction with the other regimes I mentioned has greatly decreased both the amount and severity of gout attacks.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 30, 2019
W
Verified Purchase
william peach
New York, US
★★★★★ 5
Good product
First time I took it my gout acted up but since then I haven’t had any issues with gout at all
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026
S
Verified Purchase
Sumreet
Belleville, US
★★★★★ 4
Good for pain relief
My mother found it very effective in decreasing inflammation in her joints due to high uric acid levels.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 23, 2019

recommand products