Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 12 - Jul 17
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Laird 5'2 LIFT5 EFOILThe 5'2 came out of a specific conversation between Laird Hamilton and Nick Leason. Laird wanted one board for flat water speed and surf, enough surface volume to handle heavy water, narrow enough to actually move through it. At 64 liters and 23. 5 inches wide it sits in between the 4'4 and the 4'9. That width creates a narrower profile for the length, reducing aerodynamic drag in flight, keeping the rails pulled in for deeper carves, and
The 5'2 came out of a specific conversation between Laird Hamilton and Nick Leason. Laird wanted one board for flat water speed and surf, enough surface volume to handle heavy water, narrow enough to actually move through it. At 64 liters and 23.5 inches wide it sits in between the 4'4 and the 4'9. That width creates a narrower profile for the length, reducing aerodynamic drag in flight, keeping the rails pulled in for deeper carves, and concentrating mass closer to the center. The 68mm propulsion and Gen5 Full Range Battery provide the power output to match. Hand-laid hexagonal carbon construction throughout. Built on LCS, compatible with every propulsion, wing, and battery in the lineup. This is a limited run for 2026.
- 64 Liters in a Narrower Profile: 64 liters distributed at 23.5 inches wide, 1.5 inches narrower than the closest comparable LIFT5 at similar volume. Bigger riders get the takeoff float they need without the width penalty that adds swing weight.
- Shaped for Surf and Flat Water: The pulled-in nose, narrower tail, and surf-oriented rocker profile translate directly to how the board handles in open ocean and chop. It tracks clean at speed and responds immediately off the tail.
- 68mm Propulsion – Lift5 power output 200 Havoc LCS wing: The 200 Havoc generates lift at lower speeds, a wing that earns its place in surf where timing and pickup matter. The 26 Flow back wing tightens response off the tail.
- Quiet Ride Technology: Direct drive motor. No gears, no noise. Hear the water, not the eFoil.
- Hexagonal Carbon Weave Construction: Exclusive to the Laird collection. Hand-laid at our Puerto Rico factory. Structurally stiffer than standard carbon under the torque load of the 68mm motor and Gen5 battery weight. Visually distinct from anything else in the lineup.
- LCS – Full Ecosystem Compatibility: Tool-free swaps across mast length, wings, and propulsion. With a battery adapter, the 5'2 runs the LIFTX battery and 55mm propulsion. One board, two configurations.
- 2026 Gen5 Full Range Battery: 2.2 kWh. Approximately 90 minutes of ride time on power. Built for range, the right pairing for flat-water distance sessions and extended surf.
- Elite Hand Controller: Carbon fiber housing with titanium trigger. GPS ride tracking, real-time battery readout, sunlight-readable display. Buoyant. Compatible with every Lift eFoil ever made.
WHAT'S INCLUDED
- 32" LCS Carbon 68 Propulsion + 2026 Low-Mount Propulsion Case
- LCS Jet
- 200 Havoc LCS Front Wing
- 26 Flow Back Wing
- Elite Hand Controller
- Lift Charger
- 5'2 Laird Board Bag
- LCS Large Wing Bag
- 2026 Gen5 Full Range Battery
- Gen5 Battery Backpack
SPECIFICATIONS
| LAIRD LIFT5 | |
|---|---|
| BOARD WEIGHT | 17.5 lbs. (7.9 kg) |
| PROPULSION WEIGHT |
11 lbs (5 kg) |
| BATTERY WEIGHT |
30.5 lbs (13.8 kg) |
| WING WEIGHT | 4.1 lbs (1.86 kg) |
| FULL SETUP WEIGHT | 63.1 lbs. (28.62 kg) |
| RECOMMENDED MAX RIDER WEIGHT | 220 lbs (100 kg) |
| BOARD DIMENSIONS & VOLUME | |
|---|---|
| DIMENSIONS (L x W x H) |
5'2 x 23.5" x 4" / 157 cm x 60 cm x 10 cm |
| VOLUME | 64 L |
| Gen5 BATTERY | |
|---|---|
| DIMENSIONS (with handle nested) |
13.5" x 16.7" x 3.7" (342 mm x 423 mm x 94 mm) |
| BATTERY WEIGHT |
30.5 lbs (13.8 kg) |
| ENERGY CAPACITY | 2.2 kWh |
| ON POWER RIDE TIME | 90 minutes |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 140 reviews
Sort
Product Reviews
★★★★★ 4
Good DIY Pipe Legs but Powder Coat Quality Lacks
Size: side table leg, Size: side table leg
These industrial style pipe legs make building a DIY end table easy and the kit saves a trip to the hardware store. The fittings go together normally and assembly is simple. Comes individually wrapped. My main issue is the powder coating looks and feels cheap and rubs off easily. The pipes already had marks from touching each other from unboxing. If you do not mind some wear on the finish over time this is a decent purchase. The metal at the hardware store will be thicker and more durable but will cost more. I’d recommend based on ease of having a kit and it being delivered saving me a trip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 30, 2025
★★★★★ 5
Stable, attractive, and easy to turn into a table with your choice of top
Size: side table leg
The X-shape of the table legs - constructed with solid metal flanges, T-joints, X-joints and 1-inch diameter pipes - provides a strong and sturdy base for a wood top. The legs have adjustable feet pads to prevent scratches and ensure stability. Assembly of the legs is relatively simple (the instructions are clear) but you will need your own tools to attach a top.
The industrial design is especially well suited to rec room or finished basement use. I am adding a 28" diameter raw edge slab of wood from a recently felled tree as the top and it is very attractive. (Photo unavailable because after I made certain it would work I sent the slab out for drying and finishing.)
If you want a custom table and have a particular piece of wood you want to use, these legs are an excellent choice.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 18, 2026
★★★★★ 5
Very nice kit: Beware it is NOT heavy duty plumbing pipe though!
Size: side table leg
I want to give this kit a high rating, but I need to address the "truth in advertising" bit since there may be an important disconnect between what you think you are getting and what actually comes in the box.
Black plumbing used for shelving or table legs is part of an important niche in interior design. I like the industrial loft look myself and have a variety of glass, steel, and masonry elements in my home. This kit fits that look and provides plenty of "strength" for most domestic uses, like shelves or coffee tables. But they are NOT "industrial pipe" or "maximum durability pipe." Note the phrase "cast iron finish feet," which together with the other claims might lead you to think these are cast plumbing fittings. They are NOT!
The feet and flanges feel like electrical conduit fittings, and the pipe sections are likely aluminum. They might be electrical or they might be multi-use, lightweight pipe.
While all this might lead you to think that you're getting a truly retro, heavy-duty pipe kit made of black plumbing pipe, you are not. But, does it matter? Depends. I find the lighter pipe's smooth finish a nice "tone-down" from the rough plumbing look. All together, this kit provides plenty of strength for most furniture and the rustic pipe look, but with a nicer, lighter finish. To me that is a plus--this is a very nice kit and costs less that if you'd pieced it together from real plumbing parts (I priced it out to compare), and looks retro but cleaner. I knew what to expect because while I got this kit free on Vine, I had purchased a nearly identical kit from another seller last year.
So, I'm giving it 5 stars for what it actually is and for the price, JUST BE AWARE THE NARRATIVE IS MISLEADING. Which is unfortunate because just like some people might want the heavier pipe, I'm betting more would be attracted to the look with a cleaner, lighter feel.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 31, 2025
★★★★★ 5
Wonderful additional to our dining room.
Model: Model B with Removable Tray
A great addition in our dining room. Color and style were a perfect match. Solid construction and easy to put together. Casters work great and lots of room for all sorts of beverages. Great value.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 15, 2025
★★★★★ 5
Great addition to our home
Model: Model B with Removable Tray
Putting together took a little time but instructions included were easy for me to follow. Putting the screws in for the shelves required a little work to get then started but nothing that I would say would be a problem to do. It is very sturdy and looks great in our room we are transforming into a hangout/bar area. I can't wait to get all my accessories in to add to it and display all my nice bottles I have. Great cart for the price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 17, 2022