Pay in installments of $12.49 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 31 - Aug 5
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Firestik FL3-R 3 Ft (92cm) FireFly "FL" Series Light-Weight Mechanical Tunable-Tip CB Radio Antenna REDLightweight, Easy tune 'bare hands tunable tip', High performance coil design, Flexible fiberglass tube The "FL" Series antennas are the performance leader of lightweight top loaded CB antennas. Each is approximately 40% lighter than the equivalent length Firestik II antenna. From the perspective of mount stress, the lighter materials and reduced wind drag of the "FL" antennas reduces stress by more than 60%. A 4 foot FireFly will easily perform on a
- Lightweight, Easy-tune 'bare-hands tunable tip', High-performance coil design, Flexible fiberglass tube
- The "FL" Series antennas are the performance leader of lightweight top-loaded CB antennas. Each is approximately 40% lighter than the equivalent length Firestik II antenna. From the perspective of mount stress, the lighter materials and reduced wind drag of the "FL" antennas reduces stress by more than 60%. A 4-foot FireFly will easily perform on a mount that is designed for antennas 3-foot or less. At the top of every "FL" antenna you will find our patented tunable-tip. Besides making tuning a snap, the design broadens the antennas bandwidth and increases its power handling capabilities. All "FL" antennas are compatible with autos, trucks, vans, motorcycles and ATV's in a single antenna configuration when metallic ground plane is available. Or, they may be used in dual (co-phased) configuration on any vehicle made from any type of material. Like all CB antennas, the "FL" antennas should be fine-tuned (SWR) in their final mounting location. If you have ever tuned a non-tunable tip antenna, you will have a real appreciation for the "FL" antennas. In short, tuning is as easy as popping off the tip and turning the adjustment screw up or down as needed. All "FL" antennas exceed the requirements of any CB radio, new or old. Aside from the hi-performance loading coil that maximizes the transmit/receive functions of your CB, these top-loaded antennas will also receive the NOAA emergency weather alert and national weather broadcasts for radios with those features.
- All "FL" antennas are 100% American made with 100% American materials. To maintain a balance between flexibility and ruggedness, we use a custom blended, glass fiber reinforced tube. Each is wound with double insulated copper wire to prevent the oxidation and shorted windings often found on non-Firestik antennas. The tunable tip mechanism is made from rust-proof brass and has a rubber o-ring to hold the adjuster in place after tuning. Our 3/8"-24 threaded base will fit all Firestik mounts and accessories. Each antenna is covered with a static reducing, water-tight sleeve containing UV and pigment stabilizers. For peek performance we recommend that you use one of our Fire-Flex or RoadPal coaxial cables with these antennas.
- All "FL" series antennas are factory bench tested for resonant frequency and overall quality.
- ALL antennas, regardless of style or manufacturer, MUST be tuned after installation on the vehicle. Transmitting antennas are not "plug-n-play" devices.
- 3 Ft (92cm)
- Rated @ 100 Watts
- Graphite with Red tip
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 20 reviews
Sort
Product Reviews
★★★★★ 5
Good must have product.
Good product, easy to install. A must have for Epson tank printer's. If you do the deep clean and over fill the head cleaning reservoir. Your your printer I'm set off a code that it is full and becomes trash cannot be reset.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 19, 2026
★★★★★ 5
Perfect to fix your Epson Ink Pad Counter Issue
Exactly what I needed! My Epson ET-4700 started displaying an 'E-11' error on the display so I learned I would have to replace the ink pad. The package came with 4 ink-pad receptacles, four baggies for discarding the old ones, plastic gloves and even a miniature screwdriver to get the backing off of the printer. The hardware part was super simple to remove the old and install the new. Hit a bit of a snag with the included software(which was a link to a website)which Windows Defender kept blocking no matter what I tried, but a quick email to support they answered right away. Sent me to a link for better software and I was able to successfully get my printer working again. A+++ transaction and service. Thanks again!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 20, 2025
★★★★★ 5
Will buy again
Worked extremely well
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
★★★★★ 5
Good product-May need to troubleshoot
I am giving this product five stars even though I had issues resetting my printer because it was not product fault. The maintenance box was easy to install. Based on other reviews, I was prepared for the wic reset site that looked suspicious. I will say it is legit. I purchased a reset key which I later found out that I did not need. Read further and I will explain.
After I downloaded the WIC software, I spent over 2 hours troubleshooting yrying to reset my printer. I am writing this hoping that it might help others. In the end, the problem was my Wi-Fi was not recognizing the printer. When I was trying to reset it. I ended up connecting my printer via USB cable and I was immediately able to reset my printer and start printing again. I am going to list the troubleshooting steps I took, but you might want to try that first. In addition, before purchasing a reset key, they do offer a trial key. If you have never used a trial on that printer. I suggest doing this first because in the end I used the trial rather than the key that I had purchased.
Here are a few additional troubleshooting steps you could try:
1. Ensure Correct Reset Key: Double-check that the reset key you purchased is for the correct model of your printer. If it's specific to another model or region, it may not work correctly.
2. Reinstall WIC Software: Uninstall and reinstall the WIC software to make sure it's functioning properly. Sometimes a corrupted installation can cause errors.
3. Run the Software as Administrator: Make sure you are running the WIC software as an administrator. Right-click on the WIC Reset tool icon and choose "Run as Administrator."
4. Disable Firewall/Antivirus Temporarily: Your firewall or antivirus software may be interfering with the connection. Temporarily disable them and try again to see if that helps. Make sure to turn it back on when finished.
5. Try a Different USB Port: If you are connecting via USB, try switching to another port. Alternatively, if you're using Wi-Fi, you might want to try a USB connection to see if that helps the software communicate with the printer. This is what worked for me.
6. Use a Different Computer: If possible, try using the reset software and key on a different computer. Sometimes system-specific issues can interfere with communication between the software and the printer.
7. Check for Firmware Updates: Ensure that your printer's firmware is up to date. If it's outdated, it might cause incompatibility with the reset tool. Be cautious, as some updates can prevent third-party reset tools from working.
If none of the above works, it might be worth contacting the vendor of the reset key. They may have specific guidance or offer a replacement key if the one you purchased is faulty.
Last resort would probably be to call Epson.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 20, 2024
★★★★★ 5
Perfect for my Epson 2720!
When my Epson 2720 printer pooped out on me and said my ink waste box was full, I was so sad. After watching a billion YouTube videos, I learned there are a ton of people selling new ink boxes and I had no clue which one to pick.
I am the most electronically illiterate person on the planet so I just knew it wouldn't be easy for me to fix... wrong! This kit came with the new ink waste box, tools to change it out, a bag to throw the ink filled box into, instructions, and an extra pad for next time.
After removing the old box, the new one slid in perfectly. Resetting the wic code was extremely easy as well! The instructions show step by step diagrams on what to do. It was a fast and simple process.
It all worked out too well for me (normally it's a domino effect of chaos when I repair something) so the first print to see if it all worked was a nail biter. It printed beautifully!
If you have a 2720 that needs repaired, this is the product for you!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 14, 2026