airlock Filament Vacuum Sealing System (12 Bags) v2

airlock Filament Vacuum Sealing System (12 Bags) v2Are you wanting to buy airlock Filament Bags in Australia? Airlock is a filament resealing system that seals to the same standard as industrial vacuum machine. Now you can open and reseal your filament without worrying about it degrading and absorbing moisture and resuse them time and time again! V2 is new from 1st Feb 2022 Bags are now thicker, so less chance of snagging on a filament roll and piercing the bag. The Vacuum Bags were designed to

Are you wanting to buy airlock Filament Bags in Australia?

Airlock is a filament resealing system that seals to the same standard as industrial vacuum machine. Now you can open and reseal your filament without worrying about it degrading and absorbing moisture and resuse them time and time again!

V2 is new from 1st Feb 2022 - Bags are now thicker, so less chance of snagging on a filament roll and piercing the bag.

The Vacuum Bags were designed to accommodate most Filament Spools on the market and have been tested with spools up to 8cm in width. The bags feature dual zip locks and a flat vacuum valve that allows the bags to be stored in their original boxes or stacked on top of each other.

The airlock bags are designed to be used with the Nanovac Vacuum Pump to keep all your filament from absorbing moisture.

The airlock Filament Vacuum Sealing System was designed by Judd from polyalchemy Filament and is an incredible product that Phaser FPV use in their print farm and 3D Printer setup.

Phaser FPV recommendations

Dry your filament with the Sunlu Filament Dryer & use it while printing with a Dryer Mount. When printing is finished, store it in the airlock bags and remove air with NanoVac Pump. You can then place a round humidity sensor in the spool adapter and have a good gauge of humidity on the spool when you go to print again. It may require drying again for optimal results however it won't take as long because of the storage in the bags. You can even stack all your filament on top of each other once they are in the airlock bags.

Bag Specification

• Size: 40 cm x 38 cm  (15.75 " x13.38 ")
• Material: Nylon-Back & front Zip Lock-LDPE
• Bags are BPA free and have passed FDA approval 

Package contents

• 12x airlock bags

Note: You need to buy the USB-C nanovac pump to complete the package!
Use AIRLOCKPACKAGE coupon for $10 OFF when you combine a pump and bags together in the same order.

Browse more

• Browse airlock Filament Vacuum Sealing System
• Browse Polyalchemy filaments
• Browse PLA Filaments (also PLA+)
• Browse ASA Filament
• Browse ABS Filament
• Browse PETG Filament
• Browse Nylon Filament
• Browse PC Filament
• Browse SLA Resin
• Browse Speciality Filament
• Browse TPU Filament