SKU: 17166145941

T-Motor Velox F7 SE+V70A SE 8S Flight Stack

Sale price$66.48 Regular price$73.87
Save 10%

Pay in installments of $18.47 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 31 - Aug 5

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

T-Motor Velox F7 SE+V70A SE 8S Flight StackTmotor V70A SE 8S ESC + F7 SE 8S FC 4in1 FPV Stack Building a custom 8S FPV drone that doesn't immediately burst into magic smoke requires more than just blind faith. Enter the F7 SE FPV flight controller stack. Featuring a standard 30. 5x30. 5 stack footprint, this brain and brawn combo runs a reliable ICM42688P gyro for buttery Betaflight PID tuning and gives you 5 UARTs to wire up your entire receiver and VTX ecosystem. The paired V70A SE 4 in 1

Tmotor V70A SE 8S ESC + F7 SE 8S FC 4in1 FPV Stack

Building a custom 8S FPV drone that doesn't immediately burst into magic smoke requires more than just blind faith. Enter the F7 SE FPV flight controller stack. Featuring a standard 30.5x30.5 stack footprint, this brain-and-brawn combo runs a reliable ICM42688P gyro for buttery Betaflight PID tuning and gives you 5 UARTs to wire up your entire receiver and VTX ecosystem. The paired V70A SE 4-in-1 ESC pushes a massive 70A continuous current, powered by the modern open-source glory of AM32 firmware. After 10 years of experience in the manufacturing and delivery of commercial FPV systems, we've seen every creative way a pilot can fry a board. That's why this 4-8S capable powerhouse is over-engineered to endure your questionable throttle management. You're going to crash into a concrete bando anyway, but at least your electronics won't be the bottleneck.

Key Highlights of this FPV Flight Controller Stack

  • Dual BEC System: Built-in 5V/3A and 12V/3A BECs to cleanly power your high-drain digital VTX systems without browning out.
  • Wireless Field Tuning: Integrated Bluetooth means no more hunting for a USB Type-C cable in the dirt when you need to tweak rates.
  • Massive Data Logging: A 128MB Blackbox allows for extensive flight data capture so you can mathematically prove it was a hardware desync, not your thumbs.

Why You Want It

Because you are tired of under-specced hardware ruining your flight packs. The STM32F722 MCU handles intense loop times effortlessly, while the AT7456E & HD OSD integration ensures your video feed stays informative whether you fly analog or digital. The ESC's AT32F421 MCU and AM32 firmware give you rapid, predictable motor response for pulling out of dives at the last possible millisecond. It's heavy-duty performance packed into a standard mounting footprint, giving you the confidence to push 8S voltage without hesitation.

Specifications

  • MCU (FC): STM32F722
  • Gyro: ICM-42688P
  • OSD: AT7456E & HD
  • Blackbox: 128MB
  • Input Voltage: 4-8S LiPo
  • Weight (FC): 8g
  • Dimensions (FC): 38x38x7mm
  • Mounting: 30.5x30.5mm / ⌀4mm
  • Firmware (FC): BETAFLIGHT
  • UARTs: 5
  • BEC: 5V/3A & 12V/3A
  • Connectivity: Bluetooth, USB Type-C
  • MCU (ESC): AT32F421
  • Firmware (ESC): AM32
  • Current (ESC): 70A Continuous / 75A Peak
  • Weight (ESC): ~12.3g
  • Dimensions (ESC): 44.4x41x6mm

FAQ

What firmware does the V70A SE 4-in-1 ESC use, and is it compatible with 8S setups?

The V70A SE ESC runs on AM32 firmware, utilizing an AT32F421 MCU for optimal motor control. It is fully compatible with 4-8S LiPo battery voltages, supporting 70A continuous and 75A peak current, making it ideal for high-voltage FPV drone builds.

What’s in the Box*

  • 1x F7 SE 8S Flight Controller
  • 1x Velox V70A SE 8S 4-in-1 ESC

Disclaimer

If you wire full battery voltage to a 5V pad, it will die instantly. We are not responsible for your soldering iron burns, missing magic smoke, or your inability to read a simple pinout diagram before applying 8S power.

Still Here?

Click buy. We need your money to fund our own crippling FPV parts addiction, and you need a stack that won't give up halfway through a power loop. It's a win-win.

What Makes It Different?

This isn’t your basic 4S baby stack. With 8S support, a 70A ESC, and an F7 flight controller, this setup is unapologetically built for pilots who think “more power” is always the correct answer. Freestyle, racing, long-range — whatever abuse you throw at it, it’s ready.

Key Features

  • 8S Capable: Laughs at your old 6S setup — more volts, more fun.
  • 70A ESC: Perfect for big motors, heavier builds, and your next bad idea.
  • F7 Flight Controller: Smarter than your PID tuning skills.
  • 4-in-1 Compact Design: Less solder spaghetti, more clean builds.
  • Durable as Hell: Built to survive brownouts, hot swaps, and inevitable crashes.

Why You Need It

If you’re the type who upgrades batteries before repairing frames, this stack belongs in your quad. It’s overpowered, overbuilt, and overkill — exactly what you wanted, even if you won’t admit it.

Package Includes

  • 1 × V70A SE 8S 4-in-1 ESC
  • 1 × F7 SE 8S Flight Controller

Final Word

The V70A SE 8S ESC + F7 SE 8S FC Stack isn’t just another component — it’s a dare. Bolt it in, punch the throttle, and see how long before you start questioning your life choices. Spoiler: not long.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 17166145941

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 12 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
N
NA
Carnegie, US
★★★★★ 5
Great Value, Cost-Effective, Installs in Minutes
Size: 2023-26 CRV 1.5L Gas, Size: 2023-26 CRV 1.5L Gas
This air filter set ended up being a great value and a convenient all-in-one solution for routine maintenance. What stood out right away is how closely these match OEM quality in terms of fit and overall design. Both the engine and cabin filters dropped into place without any issues, and installation was quick and straightforward. It’s the kind of swap that can be done in a short amount of time without needing any special tools, which is always a plus. I also really like that this kit includes both filters together. Since it’s generally best to replace them at the same time, having everything bundled eliminates the need to search for separate parts, compare options, or deal with multiple orders and shipping times. It makes the whole process much more efficient. In terms of performance, I did notice a slight improvement in fuel economy during my regular commute after installation. It’s not a dramatic change, but it’s a nice added benefit and a good indication that the filters are doing their job effectively. Overall build quality seems solid, and everything feels comparable to what you’d expect from a factory replacement. For the price, this is an excellent value and a practical choice for keeping up with regular vehicle maintenance. I’ve been very satisfied with this set so far and would definitely consider purchasing it again when it’s time for the next replacement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026
E
El Floor-eda
Cuba, US
★★★★★ 4
Professional-Grade Filtration for a Factory-Fresh Drive
Size: 2023-26 CRV 1.5L Gas
If you have a newer 1.5L Civic or CR-V, you know that keeping your engine breathing clean air is the best way to maintain fuel efficiency and long-term reliability. I picked up this Engine and Cabin Air Filter Set for a routine maintenance refresh, and the fit and material quality are indistinguishable from the factory components. It’s a high-quality, "all-in-one" solution that saves a trip to the dealership and keeps your cabin air crisp. Why this filter set is a standout for 1.5L Honda owners: Precise "Lock-Down" Fit (17220-64A-A00): The engine air filter is a perfect drop-in for the 2022–2026 Civic and 2023–2026 CR-V 1.5L gas models. The rubber gasket provides a tight, airtight seal in the airbox, ensuring that no dust or grit bypasses the filter. High-Efficiency H13 Cabin Filtration: The cabin filter (80291-T5R-A01) is noticeably more substantial than some budget options. It does an excellent job of scrubbing out pollen, road dust, and exhaust odors, which is essential if you spend a lot of time on the road or deal with high-humidity environments. Rugged, Deep-Pleat Construction: You can feel the quality in the filter media. The engine filter has consistent, deep pleats that maximize surface area for better airflow, while the cabin filter feels sturdy enough to handle high-velocity AC settings without vibrating or whistling. Direct OEM-Spec Replacement: These are true 1:1 replacements for the factory part numbers. No trimming or "making it fit"—they slide into their respective housings exactly as they should, providing a professional-level service in under 15 minutes. Outstanding Multi-Pack Value: Buying this set is a fraction of the cost of a dealership service. It’s an inexpensive bit of insurance for your engine’s intake system and your own respiratory comfort. ⚠️ Critical Fitment Note: This set is specifically engineered for the 1.5L Gas engines. If you are driving a 2.0L or a Hybrid model, the airbox dimensions are different, so double-check your engine specs before ordering to ensure a 100% compatible fit. Installation Tip: When swapping the cabin filter, look for the "Air Flow" arrow on the side of the filter frame. Ensure it is pointing downward (toward the floor) to match the factory airflow direction. For the engine filter, give the inside of the airbox a quick wipe with a clean microfiber cloth before dropping the new one in to ensure a perfectly clean start.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2026
C
Cubelodyte
Dallas, US
★★★★★ 5
2 for 1. Great deal over buying separately.
Size: 2023-26 CRV 1.5L Gas, Size: 2023-26 CRV 1.5L Gas
At first, I thought this was an average priced item. What I didn't realize is that my year old 2025 CR-V has TWO filters. The normal Panel Air Filter found under the hood and a Cabin Air Filter secreted away behind the glove compartment. The Pane Air Filter alone generally runs from $19.99 to $35.99. Cabin Air Filter runs a little lower in average price but the 2 combined would be nearly double the cost of this kit ($26.99 at time of order). FIT: • These filters fit snugly. Just like the OEM versions. Recommendation: Verify that you have the correct year/model CR-V. These will not fit the Hybrid. VALUE • Great price for both filters. CONCLUSION I don't think I can beat the price of these 2 filters together in a set. I live in an area where Spring tree pollen is often as much as 10X what is generally consider high. Changing filters regularly is a must. I certainly recommend this set for quality and value.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 6, 2026
S
Sha-Zam
Grantham, US
★★★★★ 5
Every bit as good as OEM.
Size: 2023-26 CRV 1.5L Gas, Size: 2023-26 CRV 1.5L Gas
These fit my wife's 2026 CRV perfectly. Replacement: No issues whatsoever with installing the cabin or engine air filter and all-told it took all of 5 minutes to replace both filters. Getting to the engine air filter took longer than replacing it. Quality / durability: These filters are every bit as durable and high quality as the OEM filters I replaced them with. When I took each filter out I inspected it to make sure that they were comparable and was pleasantly surprised that there was virtually no difference between the two in construction or the appearance of the membrane. Airflow: The membranes looked nearly identical when held to the light so airflow should be just as good with these new replacement filters as it was with the OEM. I can't believe how good of a value these filters are.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 29, 2026
M
Manny
Phoenix, US
★★★★★ 5
Perfect fit
Size: 2023-26 CRV 1.5L Gas
This filter set was a perfect fit for my vehicle and installed without any issues. Everything lined up exactly as expected, which made the replacement quick and straightforward. The quality feels comparable to the original filters, and it is a great option if you are looking for a direct replacement without overpaying at the dealership. Overall, this is a reliable and easy upgrade for routine maintenance. I would use this again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 7, 2026

recommand products