SKU: 22290052037

PLA Filament EasyFil PLA 2.85mm Glow in the Dark Green 750 gram 3D Printer Filament

$118.80 $132.00
Save 10%
No.2 Bestseller on tworldvietnam.com >

Pay in installments of $33.00 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 26 - Jul 31

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

PLA Filament EasyFil PLA 2.85mm Glow in the Dark Green 750 gram 3D Printer FilamentFeatures EasyFil PLA is a high end easy to use impact modified PLA (Poly Lactic Acid) type of 3D printer filament which is optimized for FFF FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament. Very easy to print Warp free printing and no deformation after cooling Improved flowing behaviour and inter

Features

EasyFil PLA is a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament.
Very easy to print
Warp-free printing and no deformation after cooling
Improved flowing behaviour and inter-layer adhesion
Good first layer adhesion to several (un)heated print surfaces
Slightly softer than standard PLA resulting in improved strength and impact resistance
Almost odourless processing/printing
Biodegradable

Specifications

General printing guidelines

Nozzle size: ≥ 0.15mm

Layer height: ≥ 0.1mm

Flow rate: ± 100%

Print temp: ± 180 - 220° C

Print speed: Medium

Retraction: Yes - 5mm

Heat bed: ± 0 - 65° C

Fan speed: 50-100%

Experience level: Beginner

Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Abrasiveness
Please be aware that Glow in the Dark filaments contain a relatively high concentration of extremely hard phosphorous particles, which have an abrasive nature.  In general these phosphorous particles will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend to use nozzles from stainless steel or other hardened alloys.

Filament length

ρ: 1.24g/cc

50 gr coil

0.75 Kg spool

Ø 1.75mm

± 16.8m

± 251m

Ø 2.85mm

± 6.3m

± 95m


Product export information
HS Code: 39169090
Description: Monofilament
Country of origin: the Netherlands

Package Content

1x PLA Filament EasyFil PLA 2.85mm Glow in the Dark Green 750 gram 3D Printer Filament

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 22290052037

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 16 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
L
Verified Purchase
Lee W. Sellman
Los Angeles, US
★★★★★ 5
Great Sound
Size: Pair
Great things sometimes come in little packages. Powerhouse sound with virtually no input at all. Tight, crisp, and well-made as usual from Klipsch. If you are looking for a powerhouse monitor these are what you want.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 22, 2026
Y
Verified Purchase
YALE70
Bozeman, US
★★★★★ 4
Great starter speakers - for the right price.
Size: Pair
A good all-around pair of starter speakers if you're planning on using them as standalones. These will have zero trouble filling a small to medium sized space with rich and detailed sound at low to mid volumes. The bass is adequate for their size. They're not going to knock your socks off on more thumpy genres. I would imagine pairing them with a subwoofer would make quite the difference but for rock and some synth pop, they're pretty sweet. Plus the copper woofers look very striking without the faceplates. That said, I say these are best suited at low to mid volumes because cranked, the higher frequencies can be awfully fatiguing coming out of these speakers. I would not pay anywhere close to the $349 MSRP for these (you can probably find a pair of far superior RP-600Ms for around that price nowadays). Around $150 seems like a sweet spot for the R-51Ms, but the Sony SSCS5s and Fluance Signature bookshelfs are very comparable, if not better sounding for around the same price. Still, these will probably more than satisfactory if you're not expecting to be blown away by them. UPDATE 5/20/25: Can confirm that the subwoofer made a big difference. I was going to retire these since I replaced them with some bigger floor speakers on my main setup but I decided to try them out in place of the factory speakers on the Klipsch ProMedia 2.1 I have hooked up to my computer. Not only does the onboard amp seem to drive them okay at not-insane levels of volume - they sound really sweet paired with the 6.5-inch subwoofer. While I won't change my rating, I do highly recommend getting a sub along with these speakers.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 11, 2025
R
Verified Purchase
Ramona O.
Port Orchard, US
★★★★★ 5
Great speakers, rich full sound
Size: Pair
These are really great speakers. I got them to go with my husband's new record player for Christmas. These really sound fantastic. A rich range, with a nice bass that's not too much. They were easy to connect to the player. I like a rich sound better then bright (I think if it's too bright it doesn't have enough bass), and these definitely fit the bill. I got these on a black Friday deal which was even better. They are a good value for the quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 9, 2026
Q
Verified Purchase
Q W Lott
New York, US
★★★★★ 5
The new amp/speaker configuration made a very noticeably positive difference.
Size: Pair, Size: Pair
I bought a Denton amp / Klipsch 7 speaker bundle for Christmas last year. It sounded impressive. For this year, I recently replace the Denon AVR-S970H, a 5.2.2 POS-Amp that quit after less than a year. Then I also added a 70” TV and a set of R-51M’s on the sides. I could never hear this amp driving the Dolby Atmos speakers on top of the R-625FA towers, so I decided that back speakers would be more beneficial to this 7-channel system. I’d been using the R-41M’s that came in the bundle as side surround speakers, but I was thinking that they would be more suited for use in back. So I replaced them with a new set of R-51M’s that I thought would be better surround sides because of their fuller stronger sound. As of now, at the front of this theater system is an Onkyo TX-RZ 820 AVR amp, a 70 inch LED 4K smart TV, a set of Klipsch R-625FA towers, an R-52C Center Channel Speaker, and two R-12SW Subwoofers. For the surround sides is the newly purchased set of R-51M’s on stands, and mounted on the back-wall is the set of R-41M’s, using BS-218pro Wall Mounts. For good reason, this is a very powerful amp driving a complete set of purely Klipsch speakers. I built this THX 7.2.0 surround sound system to go in my wife’s 11’ X 12’ privacy room, specifically because she is hard of hearing. She said, that with the new additions, the sound is much cleaner, stronger, the 3D surround effect is more noticeable, and the vocals are easier for her to understand. I get to use it sometimes when she’s not at home. Thunder in movies sounds as crisp sharp and loud as real thunder. All around, the system is very realistic sounding. And it can play music, shaking the house at live levels. At present, my wife and I are extremely happy with this system. It sounds as good as it looks. The Klipsch speakers & Onkyo amp configuration makes a very noticeably positive difference.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 5, 2026
D
Verified Purchase
db
Lake Worth, US
★★★★★ 5
Quality shrink tubing.
Size: 4.8mm (3/16") - 26Ft, Color: Black
This seems to be solid quality shrink tubing, shrinks well, and holds firmly. I have used it for a few projects so far and am happy with how it has performed. The package is larger than I expected, but keeps the tubing from being damaged from bends/kinks.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 7, 2026

recommand products

PREMIUM RUBBERIZED UNDERCOATING
91.08
CORRECT-IT LIQUID
56.22
The MEDIUM HEAVY Package (2500 A6 250gsm + 50 A3) - Edinburgh Fringe
135.00
CARPET & UPHOLSTERY EXTRACTOR SHAMPOO
19.41
G-Max™ Graphene Detail Spray
93.54