FETtec AIO 35A 4 IN 1 ESC

Features:

FC:

• Latest STM32G4 Processor

• 170Mhz + Math accelerator

• MPU6000

• Supply voltage 12-25V (3S-6S Lipo voltage)

• 2x dedicated onboard 5V BEC for VTX (max. 600mA each)

  • 5V BEC for RX

  • 5V/16V BEC for VTX (switchable and real Pit*)

• 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems

  • VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3

• 2x 4 pin connector for receiver and VTX

  • Signal, telemetry, 5V, gnd

  • Gnd, 5V, TX1, RX1

• 5 UART serials

  • UART 1 free

  • UART 2 used for Receiver

  • UART 3 free

  • UART 4 used for onboard OSD, can be set free

  • UART 5 used for ESCs / TLM / Onewire

• Solder pad for RGB LEDs

• Supported ESC protocols

  • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

• KISS FC firmware

*real Pit-Mode: A power supply pin which is remotely switchable

ESC:

• Active current limiting @ 35A

• Input voltage: 3s-6s

• High quality 40V MOSFETs

• STM32G071 @ 64MHz

• up to 128 kHz Motor PWM

• Full sine wave control

• Automatic input signal detection

  • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

• FETtec ESC firmware

OSD:

• Onboard OSD

  • Graphic OSD (STM32)

  • Full KISS Tuning

  • Filter (PIDs, Rates, Settings)

  • LED control (RGB LED, Racewire)

  • VTX

  • Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)

  • KISS GPS support + live map

  • Custom graphic pilot logo

  • Stick overlay

  • Custom layout

  • can be deactivated for usage of digital systems

• Connector type: JST-SH-1mm

Dimensions:

• Maximum outside dimensions: 30 x 37,5mm

  • Mounting hole arrangement: 20 x 20mm with M2 mounting hole (expandable to M3)

• Overall height: 7,9mm

• Weight: 8,9 g

Software:

KISS Firmware - Softwareupdate via FETtec Configurator

FETtec ESCs Firmware - Softwareupdate via FETtec Configurator

FETtec OSD - Softwareupdate via FETtec Configurator

Scope of delivery:

1x FETtec AIO 35A

1x Capacitor 50V 470µF

2x 4 pin cable with JST connector on one side

1x 8 pin cable with JST connector on one side

Standoffs