IGFROSTFILM Frost Etch, Wet Apply Roll 48 inch x 11 yards

IGFROSTFILM Frost Etch, Wet Apply Roll 48 inch x 11 yardsFrost Etch WET APPLY, printable window film offers a monomeric, calendared, semi transparent film with an opal sheen that allows 85% light transmission. Once applied, the printed areas produce higher visual impact than a print on gloss clear film, while unprinted areas retain the appearance of frosted glass. It offers excellent opportunities for office partitions, retail and leisure applications. Glass or acrylic application temperature +5C to +60C

Frost Etch WET APPLY, printable window film offers a monomeric, calendared, semi-transparent film with an opal sheen that allows 85% light transmission. Once applied, the printed areas produce higher visual impact than a print on gloss clear film, while unprinted areas retain the appearance of frosted glass. It offers excellent opportunities for office partitions, retail and leisure applications.

• Glass or acrylic application temperature +5C to +60C with a service temperature of -30C to +110C
• For computer-cut etched glass effect graphics, and window manifestation.
• Resistant to mineral oils, fats and fuels, aliphatic solvents, mild acids, salt and alkali for e.g. diesel oil, gasoline, paraffin, hydraulic oil, antifreeze, soap suds etc.

Compatible with eco-solvent, solvent, latex and UV-cure printers.

• Can be applied both indoor and outdoor
• Offers 85% light transmission
• Once applied the printed areas produce higher visual impact than a print on clear film
• Compatible with eco-solvent, solvent, latex and UV-cure printers
• Fire Rating: Class B - classification compliant with BS EN 13501-1:2007
  
  Material Handling:
• Ensure that the material has reached room temperature and a relative humidity of 50% before printing
• Do not handle the face film directly and ensure it free from dust and static
  
  Printing Guidelines:
• Suitable for use on solvent, eco-solvent, latex and UV-cure printers
• The product may be printed in the correct orientation or reversed, showing the image through the glass
• Ensure that the correct profiles and heater settings are used
• For print and cut applications it is advisable to allow a border around the print
  
  Application:
• Wet apply
• Allow the inks to cure before cutting flush to the print or application, this is usually 24-48 hours
• Ensure the glass is clean from grease and dirt. Do not use silicone based cleaning products prior to application.