Pay in installments of $37.28 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 30 - Aug 4
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
ATS01N209QNMain Range of product Altistart 01 Product or component type Soft starter Product destination Asynchronous motors Product specific application Simple machine Device short name ATS01 Network number of phases 3 phases [Us] rated supply voltage 380 415 V 10 10 % Motor power kW 4 kW, 3 phases at 380 415 V IcL starter rating 9 A Utilisation category AC 53B conforming to EN IEC 60947 4 2 Current consumption 45 A at nominal load Type of start Start with
Main
| Range of product | Altistart 01 |
| Product or component type | Soft starter |
| Product destination | Asynchronous motors |
| Product specific application | Simple machine |
| Device short name | ATS01 |
| Network number of phases | 3 phases |
| [Us] rated supply voltage | 380...415 V - 10...10 % |
| Motor power kW | 4 kW, 3 phases at 380...415 V |
| IcL starter rating | 9 A |
| Utilisation category | AC-53B conforming to EN/IEC 60947-4-2 |
| Current consumption | 45 A at nominal load |
| Type of start | Start with voltage ramp |
| Power dissipation in W | 4 W at full load and at end of starting 94 W in transient state |
Complementary
| Assembly style | With heat sink |
| Function available | Integrated bypass |
| Supply voltage limits | 342…456 V |
| Supply frequency | 50...60 Hz - 5...5 % |
| Network frequency | 47.5...63 Hz |
| Output voltage | <= power supply voltage |
| [Uc] control circuit voltage | Built into the starter |
| Starting time | 1 s / 100 5 s / 20 10 s / 10 Adjustable from 1 to 10 s |
| Deceleration time symb | Adjustable from 1 to 10 s |
| Starting torque | 30...80 % of starting torque of motor connected directly on the line supply |
| Discrete input type | Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm |
| Discrete input voltage | 24...40 V |
| Discrete input logic | Positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA |
| Discrete output current | 2 A DC-13 3 A AC-15 |
| Discrete output type | Open collector logic LO1 end of starting signal Relay outputs R1A, R1C NO |
| Discrete output voltage | 24 V (voltage limits: 6...30 V) open collector logic |
| Minimum switching current | 10 mA at 6 V DC for relay outputs |
| Maximum switching current | Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load |
| Display type | 1 LED (green) for starter powered up 1 LED (yellow) for nominal voltage reached |
| Tightening torque | 0.5 N.m 1.9…2.5 N.m |
| Electrical connection | 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit Screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit Screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit Screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit Screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit Screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit |
| Marking | CE |
| Operating position | Vertical +/- 10 degree |
| Height | 124 mm |
| Width | 45 mm |
| Depth | 131 mm |
| Net weight | 0.42 kg |
| Compatibility code | ATS01N2 |
| Motor power range AC-3 | 4…6 kW at 380…440 V 3 phases |
| Motor starter type | Soft starter |
Environment
| Electromagnetic compatibility | Conducted and radiated emissions level B conforming to CISPR 11 Conducted and radiated emissions level B conforming to IEC 60947-4-2 Damped oscillating waves level 3 conforming to IEC 61000-4-12 Electrostatic discharge level 3 conforming to IEC 61000-4-2 EMC immunity conforming to EN 50082-1 EMC immunity conforming to EN 50082-2 Harmonics conforming to IEC 1000-3-2 Harmonics conforming to IEC 1000-3-4 Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6 Immunity to electrical transients level 4 conforming to IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11 Voltage/current impulse level 3 conforming to IEC 61000-4-5 |
| Standards | EN/IEC 60947-4-2 |
| Product certifications | GOST B44.1-96/ASME A17.5 for starter wired to the motor delta terminal CCC CSA C-Tick UL |
| IP degree of protection | IP20 |
| Pollution degree | 2 conforming to EN/IEC 60947-4-2 |
| Vibration resistance | 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 |
| Shock resistance | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
| Relative humidity | 5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 |
| Ambient air temperature for operation | -10…40 °C (without) 40…50 °C (with current derating of 2 % per °C) |
| Ambient air temperature for storage | -25…70 °C conforming to EN/IEC 60947-4-2 |
| Operating altitude | <= 1000 m without > 1000 m with current derating of 2.2 % per additional 100 m |
Offer Sustainability
| REACh Regulation | REACh Declaration |
| REACh free of SVHC | Yes |
| EU RoHS Directive | Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration |
| Toxic heavy metal free | Yes |
| Mercury free | Yes |
| RoHS exemption information | Yes |
| China RoHS Regulation | China RoHS declaration |
| WEEE | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins |
Contractual warranty
| Warranty | 18 months |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 22 reviews
Sort
Product Reviews
★★★★★ 5
Worked out great
Size: 10FT, Style: 16AWG-3C
Just what we needed to rewire a light fixture with
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 22, 2023
★★★★★ 5
Perfect to make extension cords
Size: 20FT, Style: 16AWG-3C
I have several portable tungsten work lights on stands. They product a high level of light which is great for work in a place without adequate lighting. I can move the lights around and get the best lighting. The problem is that they have short cords. This wire, the 16AWG (with the addition of a plug and a receptacle) will solve that problem. The outer jacket is rugged enough to handle daily use and it is light enough that it is not a bother to carry several to the work site.
With a rating of 13.1 amps it maybe a little light to use as a replacement cord for power tools, but this wire does come in several other sizes including 14AWG which should work on most tools.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 18, 2022
★★★★★ 5
nice 3 strand 16 gauge wire
Size: 20FT, Style: 16AWG-3C, Size: 20FT, Style: 16AWG-3C
This review is for a 20 foot sample of 3 stranded 16 gauge wire. 300V capacity. Using a multimeter, I got a resistance reading of 0.2 ohms across each of the three strands (at roughly 68 degrees Farenheit). Specs say 26 strands of 0.254 mm Tinned copper wire are inside each cable. Good flexibility in the covering.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 18, 2022
★★★★★ 5
Just what was needed
Size: 20FT, Style: 16AWG-3C
This worked great to extend an electrical line a short distance further than the one that was attached to it. No issues encountered.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 19, 2022
★★★★★ 3
Work good
Size: 20FT, Style: 16AWG-3C
Se mira más delgado que 16 gauge
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2024
recommand products
HKM-680659 Cool Bite Toy for Dogs - Ice Bone, Dumbbell, Ball, or Donut Styles in Blue, TPR Material
70.99
Black Horse Off Road 14-94072 - Smoke Acrylic Tape On
83.00
Bilstein E4-MWP-1246C00 - B1 (Components) Motorsports Internal Component
166.00
Kleinn Automotive Air Horns HK2 Chrome Dual Horn Kit
193.00
Unisex Sponge Fleece Full-Zip Hoodie / Athletic Heather / VB FUTSAL
38.00