Pay in installments of $45.12 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 28 - Aug 2
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Lowrance Point1 Gps ModuleThe Lowrance Point 1 is the ideal position and heading device. The Point 1 provides extremely accurate and rapid boat position and speed updates. In addition unlike other position only antennas the Point 1 provides heading for accurate boat direction at any speed and for radar chart overlay. The Point 1 easily connects to any HDS Gen2, HDS Gen2 Touch or Elite 7 display or any NMEA 2000 network. It is fully waterproof and can be pole or surface mounted
The Lowrance Point-1 is the ideal position and heading device. The Point-1 provides extremely accurate and rapid boat position and speed updates. In addition - unlike other position-only antennas - the Point-1 provides heading for accurate boat direction at any speed and for radar/chart overlay.
The Point-1 easily connects to any HDS Gen2, HDS Gen2 Touch or Elite-7 display or any NMEA 2000® network. It is fully waterproof and can be pole or surface mounted on any boat.
Key Features- NMEA 2000® position and heading sensor
- Supports GPS and GLONASS, Galileo-capable with future software update
- Supports SBAS including WAAS/EGNOS/MSAS
- 10 Hz updates for smooth and accurate location
- Integrated electronic compass provides 10Hz heading for chart stabilization and radar overlay, plus accurate course over ground even at low speeds
- Compact, rugged design for all marine environments and fully waterproof
- Includes spat/pole mount
- Not recommended for use with MARPA or Autopilot
| Networking Connectors | |
| NMEA 2000 Certified | Yes |
| Connectors | NMEA 2000 Micro C |
| Power | |
| Power Supply (Supply Voltage) | 9v-18v |
| GPS Navigation | |
| GPS Receiver Channels | 32 |
| Heading Accuracy | 3 degrees |
| Horizontal Accuracy | 5 m |
| Rate of Turn | 3 degrees |
| Receiver Type | L1, C/A code, 1.575 GHz Frequency/ L2 C/A code, 1.602 GHz Frequency |
| Satellite Reacquisition | 5 seconds |
| Information | |
| Picth/Roll Angle | @30 degrees 1 grade error |
| Other | |
| Other Features |
Start-up Time: 3 seconds Cold Start: 50 seconds |
| Technical/Environmental | |
| Diameter [mm] | 90 mm |
| Humidity | 40 degrees C, 93%RH, operating |
| Product Height [mm] | 38 |
| Product Depth [mm] | 90 |
| Product Weight | 0.3 lbs (approximately) |
#000-11047-001
What's in the box- Antenna/4' cable
- T connector
- Spat/pole mount
- Mounting hardware
- Gasket seal
- Install guide
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 12 reviews
Sort
Product Reviews
★★★★★ 4
It is an upgrade from PRODUKT
There's a lot to like with this frother. First off, it gets super-fast. It has good power but struggles a bit through thicker liquids at high speeds. I really got it exclusively for frothing milk and making really smooth chocolate milk. For those things it works well.
I like the stand. I just keep a napkin under it so it will drip dry after rinsing. It is easy to clean because you can just run it on about medium under running water. I've been using it for about 3 weeks now, probably once every other day, and I'm still on the first charge. To me that is excellent battery life.
It spins true, even at high speed. The key is to treat it well and probably make sure to use the stand instead of laying it on the counter. Because of the high RPM, any imbalance or bend at all is really going to be exaggerated.
The only thing I am not crazy about is the control. I don't like that I have to twist it off while in the liquid. I wish there was just a switch along with the adjustment ring.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 28, 2026
★★★★★ 5
Terrific device. Fun to use.
Color: Black
Outstanding. Works incredibly well. And I have now also learned that skim milk makes far better foam than mild with even 1% fat (foam comes from protein and fat inhibits). Anyway, this device is well made, easy to use, two soeeks are great, battery lasts ,one time between charges. Really pleased.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 12, 2026
★★★★★ 5
Best frother ever!
Color: Black
I’ve had this frother for over a year now and it’s by far the best I’ve ever had. I purchased others in the past and they would not hold charge or end up not working after a while, but this one holds a charge forever and has lasted well over a year. It’s easy to use and powerful. Highly recommend!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
★★★★★ 5
Best choice!
Color: Blue, Color: Blue
This is the best of the best!!! Very sturdy, reliable, cleans easily I love it! Had others and this one beats them all!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2026
★★★★★ 4
The best frother I ever had
Color: White
I have been using frothers to make a daily matcha latte since 2016 and, since each of them lasted only between 4 to 12 months, I had purchased many of them.
This one is absolutely the best one! I bought it in July 2025 and I surely hope this will last more than one year. I will update my review if it stops working too soon.
But , for now, it has been great! I totally love the strong, fast engine. It perfectly whips up my matcha latte in just 3-4 seconds! As I use a very tall cup, I never experienced any overflowing of the liquid.
It feels heavy and stronger than my previous one, and I like that.
The reason I took off one star is because it doesn’t come with a metal stand considering that it is not possible to keep it standing up on the kitchen counter because, on the top, it has a robber cover that it is not flat. I am using an old stand from one of the previous frothers but, as this frother is much heavier, it keeps falling down. It would be nice to have a stand that fits this frother!
Other than that, so far, it is the best frother I have ever had!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 14, 2025
recommand products
32nd Degree Scottish Rite Collar - Black Moire Gold Braid
116.99
Entered Apprentice Apron - White with Thin Royal Blue Thin Borders
38.99
Royal Arch Chapter Chain Collar - Gold Plated on Red Velvet
73.99
Past Rank Royal & Select Masters Collarette - Maroon
30.99
Master Mason Blue Lodge Funeral Apron - Square & Compass G Hand Embroidery
70.99