Pay in installments of $19.75 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 31 - Aug 5
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Brembo 12-18 VW GTI/16-18 Audi A3 Sportback e-tron Rear Premium Xtra Cross Drilled UV Coated RotorBrembo's UV Coated rotors are developed as direct replacement that meets or exceeds OEM specifications. Environmentally friendly, the solvent free UV coating offers superior protection of the disc, including braking plate surfaces. High Carbon cast iron, where applicable, minimizes noise and vibration and provides maximum performance and enhanced driving comfort. Included with the UV Coated rotors is a fixing screw kit with all the necessary hardware
Brembo's UV Coated rotors are developed as direct replacement that meets or exceeds OEM specifications. Environmentally friendly, the solvent free UV coating offers superior protection of the disc, including braking plate surfaces. High Carbon cast iron, where applicable, minimizes noise and vibration and provides maximum performance and enhanced driving comfort. Included with the UV Coated rotors is a fixing screw kit with all the necessary hardware for simple and worry free installation. New intelligent marking location show part number & the minimum thickness. In order to optimize and restore braking performance rotors and pads should be replaced together. Pair your UV Coated rotor with Brembo's NAO/Ceramic or Low Met brake pad formulations. Brembo, the most trusted brand in braking.Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.0 ★★★★★
Based on 29 reviews
Sort
Product Reviews
★★★★★ 5
Direct replacement on my 95 SeaRay 175
Size: PP67-712 V1
My boat started to have issues with not turning over when I used the ignition switch. Replaced the switch and had no effect. Replaced the solenoid and that fixed the problem. Good price, so I replaced all 3 solenoids (Trim/ starter). Solenoids had all needed hardware (nuts/washers)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 9, 2024
★★★★★ 5
They Fixed My Boat
Size: PP67-712 V1
My boat wouldn’t start, and the outdrive wouldn’t go up or down. So I bought three of these solenoids and replaced the starter and both trim motor solenoids/relays. Now it starts right up with no problems and the trim motor is working again also. I have a 2006 Stingray boat.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2022
★★★★★ 1
Poor quality
Size: PP67-712 V1
Poor quality. Replaced a starter solenoid on a mercruser 4.3. Right off install it would click but not make a connection to start motor. Confirmed this was the culprit by jumping the terminals. After testing multiple times found it worked a little less than half the time.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 5
Ya Just Gotta Have One
Size: 7.2 Surround + 3 HDMI
This is a must-have for in-wall wiring of your surround. I chose this one because I installed a 7.2 system with gold-plated jacks and it worked out great. You can get almost any combination of HDMI, subs/surrounds that you need (5.1, 5.2, 7.1, 7.2 etc). Do your planning on location and wire-routing; get good quality speaker wire and HDMI (high-speed with Audio Return Channel); get the remod-style mounting bracket/box then cut your hole at the same height/level as your electrical outlets and preferably between the same studs as your TV's wire-box so your HDMIs just run straight up to the TV (remember to install the bracket BEFORE you run your wires). When connecting the wires to these terminals, it's best to have 10 to 12 inches of wire coming out of the wall because you need space for your hands to manipulate the wires and nuts on the terminals. If you have a basement with access to the floor below the mounting location, it's best to drill 4 half-inch holes straight up through the bottom plate of the wall and feed your wires up those holes. Tip: If your TV and Surround Receiver are fully compatible you really only need 1 HDMI port on the wall plate, because you can plug your devices into the receiver and just sent the A/V/data to the TV while the audio is returned over the same HDMI.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 2, 2016
★★★★★ 5
Made a wire nest look fairly neat.
Size: 7.1 Surround + HDMI
My only complaint is that it wasn't available in black as it's in a dark walled home theater. However, it's behind the receiver so it's not real visible. It worked as expected and definitely kept the wiring neater and allowed me to run it through the walls.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2024