SpeedyBee F405 40A Bluejay 25.5x25.5 3-6S Flight Controller

SpeedyBee F405 40A Bluejay 25.5x25.5 3-6S Flight ControllerIntroducing the SpeedyBee SpeedyBee F405 40A Bluejay Flight Controller! Specifications Flight Controller Product Name: SpeedyBee F405 AIO MCU: STM32F405 Gyro: ICM 42688P USB Port Type: Type C Barometer: SPA06 003 OSD: Supported Bluetooth BLE: Supported, Bluetooth speed enhancement 2. 0 Wireless Flight Controller Firmware Update: Supported (no need to press physical BOOT button) Wireless Download & BlackBox Analysis: Not supported DJI Air Unit

Introducing the SpeedyBee SpeedyBee F405 40A Bluejay Flight Controller!

Specifications

• Flight Controller
  • Product Name: SpeedyBee F405 AIO
  • MCU: STM32F405
  • Gyro: ICM-42688P
  • USB Port Type: Type-C
  • Barometer: SPA06-003
  • OSD: Supported
  • Bluetooth BLE: Supported, Bluetooth speed enhancement - 2.0
  • Wireless Flight Controller Firmware Update: Supported (no need to press physical BOOT button)
  • Wireless Download & BlackBox Analysis: Not supported
  • DJI Air Unit Connection Method: Supports both 6-pin direct insertion and soldering
  • 6-pin DJI Sky Port Direct Insertion: Supported, can directly connect to DJI O3/RunCam Link/Caddx Vista without changing wire order
  • Flash (for BlackBox): 8MB
  • Betaflight CC Pads (Camera Parameter Adjustment): Supported
  • Input Voltage: 3S-6S LiPo battery
  • 4V5 Output: Two 4V5 outputs; total current 1A
  • 5V BEC Output: Three 5V outputs; total current 2A; shared with 4V5
  • 9V BEC Output: None (comes with an external BEC module, can switch between 5V and 9V); total current output 2A
  • MOTOR: M1-M4
  • UART: 4 full-function serial ports (UART3, UART4, UART5, UART6 + SBUS[R2])
  • ESC Telemetry: None
  • I2C: Supported
  • LED Pads: Supported, used to control WS2812 LED lights
  • Buzzer Pads: Supported, BZ+ and BZ- pads
  • BOOT Button: Supported, press and hold the BOOT button while powering on to enter DFU mode for firmware recovery
  • RSSI Pads: None
  • SmartPort: Not supported
  • Supported Flight Controller Firmware:: BetaFlight (Default), INAV
  • Firmware Target Name: SPEEDYBEE F405AIO
  • Mounting: 25.5 x 25.5mm, 3mm hole diameter
  • Dimensions: 33.0mm (length) x 33.0mm (width) x 8mm (height)
• ESC
  • Product Name: SpeedyBee F405 AIO
  • Input Voltage: 3-6S LiPo battery
  • Continuous Current: 40A
  • Burst Current: 45A (10s)
  • ESC Protocol: Supports DSHOT600/300; other protocols may cause severe errors, please use with caution.
  • Output Voltage: VBAT battery voltage (used to power the flight controller)
  • Current Sensor: Supported (Scale = 254, Offset = 0)
  • Firmware: Bluejay JH-40 48kHz
  • Weight: 13.6g (including CNC)

Includes

• 1x SpeedyBee F405 AIO
• 1x Soldering Practice Board
• 1x DJI Air Unit 6pin*80mm Connection Cable
• 1x 35V 470uf Electrolytic Capacitor
• 4x M2*6.6mm Silicone Dampening Sleeves
• 5x M2 Silicone Dampening Ring
• 5x M2 Nylon Hex Nut
• 1x XT30 Power Cable (5cm)
• 1x Type-C Extension Module
• 1x Power Expansion Board
• 1x BEC
• 1x Black Heat Shrink Tube for Type-C Extension Module
• 1x 4pin*80mm Cable for Type-C Extension Module
• 4x M2*20mm Screws for F405 AIO & VTX Installation
• 4x M2*12mm Screws for F405 AIO Installation
• 1x Transparent Heat Shrink Tube for External BEC
• 1x 6-pin*30mm Cable for External BEC 
• 2x Capacitor Heat Shrink Tube
• 1x User Manual

Browse More 

• Browse All Speedybee FC
• Browse All F4 Flight Controllers
• Browse All Flight Controllers