Pay in installments of $45.75 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 29 - Aug 3
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Truma DuoControl Gas Regulator with Crash Safe (Vertical / 8mm Outlet)The DuoControl CS from Truma is a safety gas pressure regulator with automatic changeover for connecting to two gas cylinders for caravans and motorhomes. The gas pressure regulator ensures a uniform output pressure of 30 mbar with a permissible inlet pressure range of 0. 7 to 16 bar. DuoControl CS allows gas appliances to be operated while driving. The integrated crash sensor (CS) interrupts the flow of gas in the event of an accident with directly
The DuoControl CS from Truma is a safety gas pressure regulator with automatic changeover for connecting to two gas cylinders for caravans and motorhomes.The gas pressure regulator ensures a uniform output pressure of 30 mbar with a permissible inlet pressure range of 0.7 to 16 bar.
DuoControl CS allows gas appliances to be operated while driving. The integrated crash sensor (CS) interrupts the flow of gas in the event of an accident with directly acting deceleration of 4.0 g ± 1.0g.
The gas pressure regulator with safety valve is a single-stage gas pressure regulator. If the gas pressure regulator is not working properly, for example due to dirt or other foreign material on the valve, the safety valve opens and blows off to a pressure of 110 mbar.
Please note:
Using the DuoControl CS in closed rooms (e.g. at home), on boats or in EX Zone 0 (e.g. tankers) is prohibited.
The national regulations must be observed if there is a possibility of it being used in mobile homes. Its use in mobile homes is prohibited in Germany.
An automatic PRV (Pressure Relief Valve) safety device integrated in the DuoControl CS with limited flow protects the connected consumers against impermissibly high pressure. As soon as an impermissibly high pressure arises on the output side, the PRV opens and blows out the overpressure into the air. The PRV closes automatically after the pressure is reduced.
DuoControl CS must not be used for commercial purposes.
- Model: Vertical with 8mm outlet
- Gas type: Liquefied gas (propane / butane)
- Admission pressure: 0.7 - 16 bar
- Output pressure: 30 mbar
- Regulator capacity: 1.5 kg/h
- Regulator inlet: Male thread M20 x 1.5 (G.13)
- Regulator outlet: Olive screw connection 8mm
- Horizontal triggering value: 4.0 g ± 1.0 g
- Operating temperature: -20 °C to +50 °C
Recommended tightening torque:
- 3 - 5 Nm for union nut M20 x 1.5 (G.13)
- 14 - 19 Nm for olive screw connection 8mm
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 9 reviews
Sort
Product Reviews
★★★★★ 5
Good product-May need to troubleshoot
I am giving this product five stars even though I had issues resetting my printer because it was not product fault. The maintenance box was easy to install. Based on other reviews, I was prepared for the wic reset site that looked suspicious. I will say it is legit. I purchased a reset key which I later found out that I did not need. Read further and I will explain.
After I downloaded the WIC software, I spent over 2 hours troubleshooting yrying to reset my printer. I am writing this hoping that it might help others. In the end, the problem was my Wi-Fi was not recognizing the printer. When I was trying to reset it. I ended up connecting my printer via USB cable and I was immediately able to reset my printer and start printing again. I am going to list the troubleshooting steps I took, but you might want to try that first. In addition, before purchasing a reset key, they do offer a trial key. If you have never used a trial on that printer. I suggest doing this first because in the end I used the trial rather than the key that I had purchased.
Here are a few additional troubleshooting steps you could try:
1. Ensure Correct Reset Key: Double-check that the reset key you purchased is for the correct model of your printer. If it's specific to another model or region, it may not work correctly.
2. Reinstall WIC Software: Uninstall and reinstall the WIC software to make sure it's functioning properly. Sometimes a corrupted installation can cause errors.
3. Run the Software as Administrator: Make sure you are running the WIC software as an administrator. Right-click on the WIC Reset tool icon and choose "Run as Administrator."
4. Disable Firewall/Antivirus Temporarily: Your firewall or antivirus software may be interfering with the connection. Temporarily disable them and try again to see if that helps. Make sure to turn it back on when finished.
5. Try a Different USB Port: If you are connecting via USB, try switching to another port. Alternatively, if you're using Wi-Fi, you might want to try a USB connection to see if that helps the software communicate with the printer. This is what worked for me.
6. Use a Different Computer: If possible, try using the reset software and key on a different computer. Sometimes system-specific issues can interfere with communication between the software and the printer.
7. Check for Firmware Updates: Ensure that your printer's firmware is up to date. If it's outdated, it might cause incompatibility with the reset tool. Be cautious, as some updates can prevent third-party reset tools from working.
If none of the above works, it might be worth contacting the vendor of the reset key. They may have specific guidance or offer a replacement key if the one you purchased is faulty.
Last resort would probably be to call Epson.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 20, 2024
★★★★★ 5
Perfect for my Epson 2720!
When my Epson 2720 printer pooped out on me and said my ink waste box was full, I was so sad. After watching a billion YouTube videos, I learned there are a ton of people selling new ink boxes and I had no clue which one to pick.
I am the most electronically illiterate person on the planet so I just knew it wouldn't be easy for me to fix... wrong! This kit came with the new ink waste box, tools to change it out, a bag to throw the ink filled box into, instructions, and an extra pad for next time.
After removing the old box, the new one slid in perfectly. Resetting the wic code was extremely easy as well! The instructions show step by step diagrams on what to do. It was a fast and simple process.
It all worked out too well for me (normally it's a domino effect of chaos when I repair something) so the first print to see if it all worked was a nail biter. It printed beautifully!
If you have a 2720 that needs repaired, this is the product for you!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 14, 2026
★★★★★ 5
Worked printer fixed
Works well for what I needed , good instructions, for replacement, ink quality and fixed printer
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2026
★★★★★ 5
Great replacement waste ink pad!
This waste ink pad maintenance box works well as a replacement for my printer. It was easy to install and fits perfectly. The extra sponge is a nice bonus and helps absorb excess ink effectively. The packaging was secure and arrived in good condition.
My only small complaint is that it didn’t come with clear instructions, so I had to search online to be sure I was installing it correctly. Other than that, it does the job and is a cost-effective alternative to the original brand.
Would definitely recommend if you’re looking for a reliable maintenance box!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 25, 2025
★★★★★ 4
MAC OS users read this
1. There is no way around needing to reset the waste ink counter by downloading software, unless you want to pay for Epson to fix your printer. Replacing the waste ink tank alone will not make your printer work. Most of the WIC software you'll find if you google search this issue is only for WINDOWS.
2. The software recommendation that came with this part was for WINDOWS users only. It's an .exe file. I researched and found one that's for MAC, and LINUX (as well as windows.) I had to read the FAQ on that site to learn how to tell my MAC I was willing to bypass security and install it, but this was simple, and I was even able to use a trial key instead of paying. The trial key reset the counter to 80% so I'll need to go through the process again sooner than if I'd paid, but I was pleased to find out it would work first before buying a key. The site was "my printer club."
3. I have zero affiliation with "my printer club." Just trying to help out MAC users who may think they're out of luck, as it even says on the Epson site, direct quote: "Yes, the service alert and service repair process may be temporarily delayed on most printers by using the Maintenance Reset Utility to enable printing for a short period of time. This method is available to Windows users (Windows 10, Windows 8, Windows 7, Windows Vista, and Windows XP) as a one-time option while customers determine the best next steps for repairs. Currently there is no Maintenance Reset Utility available to Mac OS users."
4. Installing the waste tank purchased here was quick and easy. I'm only giving 4 stars because I had no idea when I bought it that their instructions weren't for MAC.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 4, 2024