SKU: 62461563356

Fits Jeep Wrangler JL 4WD (2024) 3.5 Inch Lift Kit; Adj LCA; FR D/S; 91830

Sale price$629.98 Regular price$699.98
Save 10%

Pay in installments of $175.00 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 9 - Aug 14

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Fits Jeep Wrangler JL 4WD (2024) 3.5 Inch Lift Kit; Adj LCA; FR D/S; 918303. 5 Inch Lift Kit Adj LCA FR D S Jeep Wrangler JL 4WD (2024) Heavy Duty Track Bar: Our included track bar is an absolute beast, constructed from forged solid steel for unparalleled strength and durability. With its massive 1. 25 inch outside diameter and rugged OEM style rubber bushings, it's built to handle anything the off road throws its way. Durable CV Driveshaft: The factory shaft does not have adequate clearance once lifted and will cause

3.5 Inch Lift Kit - Adj LCA - FR D/S - Jeep Wrangler JL 4WD (2024)

Heavy-Duty Track Bar: Our included track bar is an absolute beast, constructed from forged solid steel for unparalleled strength and durability. With its massive 1.25-inch outside diameter and rugged OEM-style rubber bushings, it's built to handle anything the off-road throws its way. Durable CV Driveshaft: The factory shaft does not have adequate clearance once lifted and will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Country's extended Front CV Driveshaft eliminates this issue allowing you to flex your suspension with more peace of mind! Easy Installation: We know you'd rather be off-roading than in the garage all day. That's why our lift kit is designed for easy installation, so you can hit the trails in no time. At Rough Country, we understand that no two off-road journeys are the same. That's why our 3.5-inch kit is fully adaptable, allowing you to select your preferred shock series, be it the nitrogen-charged N3 shocks or the premium Vertex Reservoir shocks. With Rough Country, you're not just upgrading your Jeep; you're defining your off-road legacy.


Features:

  • Easy installation
  • Increased ground clearance
  • Levels the front with the rear of the vehicle
  • Coil springs are based on OEM spring rates for great handling and smooth ride quality
  • Utilizes linear coil rate springs that promote better handing and load support
  • Includes forged track bar and rear track bar bracket keeps the axles perfectly centered
  • Included track bar is constructed of forged solid steel for unsurpassed strength and durability
  • Included track bar features a massive 1.25in outside diameter and durable OEM style rubber bushings
  • Includes control arm drop brackets to retain factory arms at the proper geometric angle.

Application:

Year Make Model Submodel
2024 Jeep Wrangler Rubicon X
2024 Jeep Wrangler Rubicon
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 62461563356

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.9 ★★★★★
Based on 30 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
W
Verified Purchase
william scott
Chelsea, US
★★★★★ 4
Not simple, nor easy
Model: SLH20025
I wanted to add sound proof material to the bare metal areas on the floor of my Toyota Tundra. The area behind the front seats had a haphazard application of sound deadening material. There were several complications to the project which may come up in other vehicles. First is the floor covering which had plastic pillars underneath to support any weight on the cover. The sound deadening material had to be cut out so these pillars would rest on the bare metal of the floor. This required a lot of cutting with a utility knife and at times heavy scissors. The instructions say to make a template before cutting the material and I did this for the driver's side. This doubled the amount of time needed to install it. On the passenger's side I laid the rectangles of material with the backing on and pressed the floor covering onto the material. This showed where the support pillars were, which I then cut out. Second is peeling the backing off the material. This can be very difficult as the adhesive sticks to it. The backing came off in multiple pieces and sometimes took 5 minutes for one piece. They say to wear gloves when handling the material but this is impossible when trying to get the backing off. Third is pressing the material onto the metal. The instructions say to use a roller, but this was impossible for the irregular surface I was working on. The hand is the best tool to press the material on. The material seems to be of high quality and I expect it will reduce the road noise in the cab.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2025
M
Verified Purchase
Mike
Omaha, US
★★★★★ 5
Great sound mat for the price!
Style: 50 mil 50 SqFt, Style: 50 mil 50 SqFt
This is a good product. Many people go with KILMAT because of the value to price point. I did as well. When you clean the surface (in my case it was all painted metal) this stuff sticks very well. I do recommend you use a seam roller of some type, I used Lumiteco 3 piece roller set. This will help with adhesion and mostly flatten the overlapped edges. It also helps you see where you have rolled as it leaves little grooves. The difference when we had no sound mats and after was very impressive. We haven't finished our install yet and it is quieter than when we had an interior in the van. There are thicker mats available in other brands, but this will work great for our van build, but this helps keep the weight down. It is quality material, just be careful when you are removing the backing, the edge of the foil face can cut you. I suggest you layout where you are installing the mat and cut to fit. From what I have read, you don't need to cover every inch in the vehicle, just spot install for a big difference. I chose to cover most surfaces to help keep sound out when we are sleeping in the van. We haven't finished putting the van yet, but we have driven it around and been very satisfied with this product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 3, 2025
P
Verified Purchase
Paul
Houston, US
★★★★★ 5
Excellent sound deadening mats
Style: 80 mil 36 sqft, Style: 80 mil 36 sqft
Purchased these for a 2020 Lexus RX350 due to the hollow sound of the car doors when shutting. They sounded cheap. The mats are super sticky and I applied them when the doors were hot from sitting in the sun. They alubutyl sticks like crazy and the end result was perfect. Now I have solid sounding doors. Good quality product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
A
Verified Purchase
Amazon Customer
Carnegie, US
★★★★★ 5
Awesome product 👌
Style: 50 mil 50 SqFt, Style: 50 mil 50 SqFt
I love this stuff. I use it alot. Sticks great Easy to use Molds super easy Really helps with sound. Great product. I wish I could get sponsored for this product on my projects..
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 30, 2026
J
Verified Purchase
john l fields
Battle Creek, US
★★★★★ 5
Good product at a good price
Style: 80 mil 36 sqft
This product works great and easy to install. I do two or more vehicles a month. I switch to this brand a year ago and would recommend to everyone of my customers
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026

recommand products