RL-601S Plus 2 in 1 Rotating Fixture Mobile Phone Screen Back Cover Glass Remove Separator

It is the first to develop a 2-in-1 design structure of screen separation and glass back cover removal, which can directly remove the screen, safe and fast; even if the screen is broken, the film can be easily replaced without heating; when the glass back cover is down, it is used to remove the screen. When the cover is up, it is used to remove the rear cover glass

Steps to remove the glass back cover
--1.Remove the suction cup bracket from the clamp.
--2.Place the back cover of the phone on the front, and fix the phone with the plywood screws.
--3.Operate with blasting pen, adjust the buckle and rotate the table, which is convenient for blasting.
--4.After the blasting is completed, use a shovel to cooperate with the fixture to clean the rear cover glass. If there is any residue, continue to clean.

Screen separation steps
--1.Install and use the suction cup bracket along the bracket rail.
--2.Put the plywood screw on the front of the phone screen to fix it, and clamp the phone.
--3.Inject an appropriate amount of 95% industrial alcohol on the phone frame.
--4.Put down the suction cup part smoothly, align the suction cup with the mobile phone, and fasten the suction cup fixing adjustment button after selecting it.
--5.Slowly adjust the screw tension knob to drive the suction cup to absorb and complete the disassembly work.