SKU: 70120342077

BetaFPV Cetus Lite V2.0 FPV Drone Starter Kit

Sale price$98.95 Regular price$109.95
Save 10%

Pay in installments of $27.49 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 6 - Aug 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

BetaFPV Cetus Lite V2.0 FPV Drone Starter KitFeatures The auxiliary altitude hold function helps everyone to fly easily, lowering the difficulties of operating an FPV quadcopter. Made of PA12 material, the frame is very durable and has excellent impact resistance in drop & impact. The protective guard design ensures safe flying both indoors and outdoors. With high efficient BT2. 0 300mAh 1S battery, the flight time is about 4 5 minutes. Easy to replace the battery and getting more batteries for

Features

  • The auxiliary altitude hold function helps everyone to fly easily, lowering the difficulties of operating an FPV quadcopter.
  • Made of PA12 material, the frame is very durable and has excellent impact resistance in drop & impact. The protective guard design ensures safe flying both indoors and outdoors.
  • With high efficient BT2.0 300mAh 1S battery, the flight time is about 4-5 minutes. Easy to replace the battery and getting more batteries for longer flight time is recommended.
  • The Cetus Lite has a low-voltage prompt function. It will flash RED LED slowly when the battery voltage is low, reminding users to replace the battery in time and protecting the battery from overusing.
  • The automatic calibration performed by the quadcopter makes it very convenient and easy to start flying. It ensures the stability of every flight. All you need to do is to place it flat and power it on to activate the calibration mode (connect the battery).

Specification

  • Height Positioning: Barometer
  • Accuracy of Auto-hover: vertical ±0.3m (under no wind environment)
  • Receiver Protocol: Frsky D8
  • Flight Controller: Cetus FC V3.0
  • VTX: 25mW (Cetus Lite FPV)
  • Camera Tilt Degree: 25° (Cetus Lite FPV)
  • Camera: Cetus Lite Camera (Cetus Lite FPV)
  • Goggles: VR02 FPV Goggles (Cetus Lite FPV)
  • Transmitter: LiteRadio 1 Radio Transmitter (The BetaFPV Cetus Lite uses the Frsky D8 protocol for its radio communication)
  • Motor: 716-19000KV Brushed motor
  • Propeller: 31mm 4-blade 0.8mm shaft hole
  • Takeoff Weight: 36g (Cetus Lite FPV with battery), 34g (Cetus Lite with battery)
  • Size: 90*85*45mm
  • Power System: 1S
  • Battery: BT2.0 300mAh 1S Battery (external)
  • Flight Time: 4-5 mins
  • Flight Distance: 80m (in a wide & interference-free environment)

Altitude Hold, Stable Hover

Altitude hold keeps the drone hovering at a certain height, combining with the LiteRadio 1 that has two centering gimbals, new beginners can easily control the height of the quadcopter. The Cetus Lite has a built-in accurate barometer, ensuring stable hover that allows you to fly quadcopter smoothly. With the altitude hold function, new beginners can improve on FPV flight skills and have extra fun from every flight.

Effective Protection Frame Design

Safety is important, especially for children. The Cetus Lite features a propeller guard design, protecting from users getting hurt. The frame is made of PA12, a high-quality and durable material, allowing it to stay strong and detached even during flight crashes. Users can fly it confidently and has no concern about crashing. This reliable design ensures safe indoor and outdoor flying.

Emergency Auto Locking

Integrated with a 6-axis IMU (Inertial Measurement Unit) sensor, which enables the quadcopter to ensure flight safeness. The Cetus Lite quadcopter will automatically disarm the motors when a collision is detected. This function guarantees pilots' and property safeness.

Small and Convenient Portability

The Cetus Lite is small size with ultralight weight. Users can put it in their pocket or bag conveniently. This little quadcopter does not need much space to place. With its small size, the quadcopter can easily perform outdoor flights and at the same time fly agilely through tight indoor spaces.

Compact and Dedicated Design

LiteRadio 1 radio transmitter has a perfect size for children to hold. It is consist of two self-centering gimbals, which make the flight easier and smoother.

Two different heights of the sticks ends for optional grip styles. The LiteRadio 1 comes with thumb stick ends and additional pinch stick ends in the package. Users can choose the grip styles they like.

Speed Under Pilot's Control

New to FPV quadcopter? It is easy for beginners to understand the speed of the Cetus quadcopter. The Cetus Lite has slow and fast speed modes, which can be altered on the radio transmitter. Users can gradually improve their flying skills and make progress day by day.

Real Flying Experience with FPV

Cetus Lite FPV Kit includes VR02 goggles and the quadcopter has a built-in VTX and camera, allowing users to have an immersive flying experience. Users also can check the quadcopter flying status from the OSD information shown on the goggles.

FPV Simulator Supported

First time flying a quadcopter? You can learn and practice flying a quadcopter through an FPV simulator before real flying. LiteRadio 1 supports playing FPV simulators like DRL/DCL/Uncrashed/Liftoff. LiteRadio 1 is capable of practicing and charging at the same time. Check out the Liftoff flying demonstration here. Download Liftoff here .

Included

  • 1 * Cetus Lite FPV or Cetus Lite Brushed Whoop Quadcopter
  • 1 * LiteRadio 1 Transmitter (CC2500 Version)
  • 1 * BETAFPV VR02 FPV Goggles
  • 2 * BT2.0 300mAh 1S Lipo Battery
  • 1 * BT2.0 Battery Charger and Voltage Tester
  • 1 * USB Charging Cable (Type-C)
  • 1 * Type-C Adapter (Adapter board and 4-pin connector cable)
  • 1 * Prop Removal Tool
  • 4 * 31mm 4-Blade Prop (Spare parts)
  • 1 * 716 CW Motor
  • 1 * 716 CCW Motor
  • 1 * Goggles Headband

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 70120342077

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 8 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
K
Verified Purchase
karine
Belleville, US
★★★★★ 5
Works
Size: 3 Panel-102'', Color: Beige, Size: 3 Panel-102'', Color: Beige
It’s beige and not white. Once install - hard to disinstall. Need a drill to put it together
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
R
Verified Purchase
ralversity
Cuba, US
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
T
Verified Purchase
Talagand
West Palm Beach, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
B
Verified Purchase
Barbara McCloud
Battle Creek, US
★★★★★ 5
Nice and strong
Color: Black, Size: Wheel-6 Panel
Nice and strong, tedious, putting together, but very good quality
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 17, 2026
A
Verified Purchase
Al Tompkins
Bozeman, US
★★★★★ 5
if you are going to be moving them a lot, buy something more sturdy.
Color: Black, Size: Wheel-6 Panel
I use these at our churchc. They are pretty good, not terribly study and the screw that hold the faabric have pulled out in a couple of places. But they wqould work especially well if you were not constantly moving them as we do. They are a bit of a pain to assemble.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 20, 2026

recommand products