iFlight Blitz F7 E55 Flight Stack (F7 + 55A 4in1 ESC)

iFlight Blitz F7 E55 Flight Stack (F7 + 55A 4in1 ESC)FC Features Improved circuit design, better components, and lower electrical noise! DJI HD VTX Connector (Plug and Play No soldering required) FC indicator LEDs for visual debugging With LC filter FC Specifications MCU: STM32 F722Gyro: ICM42688Barometer: DPS310 OSD Chip: AT7456E Flash: 8MB (Blackbox flash) UARTS: 6 Motor outputs: 4x (SH1. 0 connector) I2C serial: SDA SLA pads Smartaudio IRC Tramp VTX protocol supported LED controller: Yes Beeper pad:

FC Features

• Improved circuit design, better components, and lower electrical noise!
• DJI HD VTX Connector (Plug-and-Play / No soldering required)
• FC indicator LEDs for visual debugging
• With LC filter

FC Specifications

• MCU: STM32 F722Gyro: ICM42688Barometer: DPS310

  OSD Chip: AT7456E

  Flash: 8MB (Blackbox flash)

  UARTS: 6

  Motor outputs: 4x (SH1.0 connector)

  I2C serial: SDA / SLA pads

  Smartaudio / IRC Tramp VTX protocol supported

  LED controller: Yes

  Beeper pad: Yes

  Firmware target: IFRC-IFLIGHT_BLITZ_F722

  Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter

  Dimensions: 36.5*35 mm

  Weight: 7.8g

  BEC: 5V 2.5A / 9V 2A

  UART 1 for VTX HD / Analog
  UART 2 for a Receiver
  UART 3/4/5 for GPS or other sensors that require a serial port
  UART 6 for ESC Telemetry

ESC Specification

• Mounting Holes: 30.5*30.5mm/Φ4mm
  Weight: 15.3g
  Supports 2-6S lipo input
  MCU：G071
  Constant: 55 Amps
  Burst: 65 Amps
  Current sensor: Yes
  BEC: No
  Current rate: 200
  Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
  Target: IFLIGHT_BLITZ_G2

Included

• 1pc BLITZ F7 FLIGHT CONTROLLER
• 1pc BLITZ E55S 4-IN-1 2-6S ESC
• 1 set SILICON GROMMETS
• 1 set WIRE HARNESS FOR F7 FLIGHT CONTROLLER