Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 11 - Jul 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
GepRC CineRun HD3 PNP Quadcopter (DJI FPV)The CineRun from GepRC is undoubtedly one of the best 3" cinewhoops in its class in terms of flight performance. The super rigid frame coupled with a dual gyro F7 flight controller couple with a pro tune, essentially remove any wobbles in your footage. This means with the cinerun, you can capture that perfect cinematic shot. DJI FPV air unit is not included with this kit, but it can easily be installed. Unless you are using the DJI FPV remote, you
The CineRun from GepRC is undoubtedly one of the best 3" cinewhoops in its class in terms of flight performance. The super rigid frame coupled with a dual gyro F7 flight controller couple with a pro tune, essentially remove any wobbles in your footage. This means with the cinerun, you can capture that perfect cinematic shot.
DJI FPV air unit is not included with this kit, but it can easily be installed. Unless you are using the DJI FPV remote, you will need to install your own receiver (soldering may be required).
Features
- No Propellers in the view.
- Perfect for DJI FPV HD(720p 120fps FPV)
- Equipped with a 3-inch guard frame, Ensure safety and reliability
- Full 3K Carbon Fiber
- System:STABLE PRO F7 35A
- Black Box: 32Mb onboard flash memory.
- Full Soft Mounted FC System: Provides a clean operating environment for gyro.
- Exquisite Assembly Process: Eliminate any potential installation problems.
- Weight:203g(without battery and GoPro Mounts TPU)
Specifications
- Full 3K Carbon Fiber
- Side plate : 1.5mm
- Top plate : 2mm
- Bottom plate : 3mm
- Side plate : 2mm
- Wheelbase : 155mm
- Motors: GR1404 3850KV
- Recommended Battery：4S 850mAh (No inclued)
- Recommended Camera：GoPro Hero 7/8(No inclued)
Features
Frame
- Frame:3mm 3k carbon fiber
- Flight Controller:Kakute F7 HDV
- ESC:Tekko32 F3 4in1 45A mini ESC
- VTx: Caddx Vista Digital HD System for DJI HD FPV
- Motor：F1507 KV3800
- Propeller：T3140
- Buzzer included.
- Battery plug: XT30
- Wheelbase: 148.6mm
- Weight:176g（included CADDX FPV Vista）
- Recommend battery: 650mah~1300mah 4s
FPV SYSTEM : DJI FPV Air Unit
- Operating Frequency: 5.725-5.850 GHz
- Transmitter Power (EIRP): FCC/SRRC: <30 dBm; CE: <14 dBm
- Min. Latency (end-to-end)
- Low Latency Mode (720p/120fps): <28 ms
- High-Quality Mode (720p/60fps): <40 ms
- Max. Transmission Distance: FCC/SRRC: <4 km; CE: <0.7 km
- Video Format: MP4 (Video format: H.264; Audio format: ACC-LC)
- I/O Interface: USB-C, MMCX, 3-in-1 port, microSD card slot
- Operating Temperature Range: 32° to 104°F (0° to 40°C)
- Input Power: 7.4-17.6 V, about 4-9 W
- Sensor: 1/3.2" CMOS; Effective Pixels: 4 M
- Lens: 2.1 mm, f/2.1
- Shutter: Rolling shutter
- ISO: 100-25600
- FOV: 150°(D); 122°(H); 93°(V)
- Dimension: 22.1 × 21.1 × 20.1 mm
STABLE PRO F7 Flight Controller Specs ：
- Model:STABLE PRO F7 35A
- MCU: STM32F722RET6
- IMU: 2x ICM20689(SPI)
- BlackBox: 32Mb onboard Flash
- OSD: BetaFlight OSD w/ AT7456E chip
- Baro:NO
- BEC Output: 5V@3A
- Integrated LC Filter
- Input Voltage: 2-6S Lipo
- Firmware target: EXF722DUAL
- Size: 26x26mm board, 20mm mounting holes (M2)
STABLE PRO F7 ESC BL32 2-6S 4in1 Specs ：
- MCU:STM32F051
- Constant:35Amps
- Burst:45Amps
- Dimensions:31*31mm(including the power pads)
- Mounting Holes:20*20mm,M2
- Supports Dshot1200,Proshot,Oneshot,Multishot
- Current meter: Yes
- Target: GEPRC-BL32-4IN1
Includes:
- 1x CineRun HD3 Quadcopter
- 1x GoPro 7 Mounts TPU
- 4x 3inch Props(pairs)
Still Required
- R/C Transmitter (also receiver if you are not using the DJI FPV remote)
- DJI FPV Goggles
- 650-1300 4S Lipo (at least 60C)
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 1618 reviews
Sort
Product Reviews
★★★★★ 4
Good Prints for Sublimation
Model: 500N STD, Model: 500N STD
After years of using converted printers for sublimation, I finally decided to go with the Sawgrass printer, which is specifically designed for sublimation. The printer turned out to be very nice! I’m particularly happy about the Sawgrass customer service they provide.
Follow-up. I ordered the SG500 printer bundle from Amazon, but unfortunately, the prints had visible grid lines. I promptly reached out to Sawgrass customer service, and after a few emails, they figured out that the printer I received was faulty. It was all resolved within a few hours, which was way faster than I had expected. They immediately sent me a replacement machine and the prints are absolutely beautiful for my sublimation projects. Sawgrass customer service is truly amazing!
Over the past three months, I have been using the Sawgrass printer and have identified a shortcoming that I would like to share in my review. While the prints produced by the Sawgrass printer are satisfactory, they fall short of the quality achieved with a printer I previously used for several years. This printer required a conversion to sublimation printing.
I have sent a note to Sawgrass inquiring about potential solutions to this issue a couple of months ago, but I have not yet received a response. This suggests that the company may not have a viable remedy.
You be the judge. I followed Sawgrass recommendations and used the Sawgrass Print Utility, but no matter what changes I make, the converted printer seems to produce prints much more to my liking. Both of the book markers shown were sublimated at the same time.
In the future, when I have an order to complete, I will be opting to use the more affordable printer that I converted.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 30, 2025
★★★★★ 5
Sawgrass quality is excellent
Model: 500N STD, Model: 500N STD
I've been on the fence with Sawgrass, simply because cost can be an issue, but this past week I decided to put the new Sawgrass to the test against another of my printers which I converted for dye sublimation. I also own the Versiflex. I was on the fence with it initially as well, but I've been using it ALOT and I now have it down to an art. I've made shirts for friends and they were literally blown away at the quality of the print, so. . . yes, it is expensive and yes, you get what you pay for. So. . . I recently received the sublijet ink with my new Sawgrass since you cannot mix inks in a Sawgrass, not even to switch the type of ink for risk of damaging the machine. I'm seriously impressed. I made lanyards, T-shirts, bags and the quality is outstanding. I don't know if I'm going to retire my Epson, but the software to print using the Sawgrass print manager is pretty slick. Lots of options to fine tune your print quality. If you have the cash, buy it. If you don't save up. It's worth it. . . and this is coming from a skeptic.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 22, 2025
★★★★★ 5
Sawgrass is Always Innovating & Improving!
Model: 500N STD
I do own a versiflex and already have an expectation of quality and it did not let down. I’ve been running it for a few weeks and I’m honestly proud of what I’ve made. Mugs come out with deep blacks and smooth gradients, coasters are sharp edge to edge, and my poly tees keep their color after the first wash. Setup was fairly simple - drivers, print Manager, paper in, Wi-Fi paired first try. I barely tweak settings; reds, skin tones, and fine text land right without a lot of tinkering. No banding, no weird shifts, and the first print of the day is clean as it has an auto maintenance. For consistent, sellable results, it’s been worth it so far and I highly recommend it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 11, 2025
★★★★★ 5
Amazing product!
Set name: Sublimation Printer, Set name: Sublimation Printer
All I can say is "WOW". I was skeptical about changing over from my Sawgrass to another brand of sublimation printers. But now I wish I started here from the start! Not only does this machine cost a good amount less with the same paper sizes and options as my SG500 but the ink is cheaper per cartridge and 11ml larger than the standard 30ml I am use to. Set up was super easy, as well as the connection. My prints are bold, bright, and beautiful. I am amazed! I am thankful that the details in the prints show through no matter what material I am pressing on. As a business owner, I need a good, efficient printer that doesn't cost more than the product I am selling. I can't wait to continue using my machine. I have not run into any maintenance issue and can not speak on anything of that as of now. Attached photos; however, my camera did not do it justice.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 15, 2026
★★★★★ 5
Excellent image quality
Set name: Sublimation Printer
Have used this for multiple projects outstanding results, the ink is no headache and easy to install
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026