3M 06396 Automotive Adhesion Promoter Sponge Applicator Packet Box 25

3M Adhesion Promoter 06396 is a convenient liquid primer for enhancing the adhesion of 3M Acrylic Foam Tapes in automotive applications. This adhesion promoter works with most LSE plastics used for interior and exterior automotive trim and parts. Fast-drying fluid is available in .85 oz. (2.5 cc) sponge applicator packets, each covering up to 150 sq. in

Formulated specifically for use with 3M Acrylic Foam Tapes, our 3M Adhesion Promoter 06396 promotes a permanent bond with most low surface energy plastic materials commonly used in automotive instrument panel, interior trim and exterior trim parts. It works well with LSE plastics, as well as TPO, PPO, PP, PC, PC and ABS. The liquid primer dries in 30 to 90 seconds for fast and efficient application - once dry, it is ready to accept the attachment tape

The adhesion promoter is incorporated into an easy-to-use sponge inside a notched packet

Technicians simply tear open the top of the packet at the notches to expose the sponge and, using the bottom of the packet as an applicator, apply the fluid to the auto trim or part

Each sponge applicator packet contains .85 oz. (2.5 cc) of adhesion promoter, enough to cover up to 150 square inches

The adhesion promoter can also be cleaned from most surfaces using MEK or acetone solvents

Helps ensure robust attachment of trim and injection-molded body side moldings

Notched packets open quickly and evenly for efficient use

Dries in as little as 30 seconds

One packet covers up to 150 sq. in

For use on LSE plastics with 3M Acrylic Foam Tapes

Box of 25