Blackbird Brushed 45000RPM Motor (Long)

Blackbird Brushed 45000RPM Motor (Long)The Blackbird 45K series is built with solid materials and is suitable for almost all configurations. Due to its high RPM, it can also be used in short stroke builds rated at 0. 5 joules or under 1 joule. Take care with the spring and sector gear setup to prevent pre engagement that could cause piston or sector gear breakage. Our magnets can withstand high temperatures of up to 150C. The armature is equipped with a cooling system and 0. 8 mm wiring.

The Blackbird 45K series is built with solid materials and is suitable for almost all configurations. Due to its high RPM, it can also be used in short-stroke builds rated at 0.5 joules or under 1 joule. Take care with the spring and sector gear setup to prevent pre-engagement that could cause piston or sector gear breakage.
Our magnets can withstand high temperatures of up to 150°C.
The armature is equipped with a cooling system and 0.8 mm wiring.

The cooling port near the end bell provides effective cooling without risking damage to the motor if any internal part fails. The CNC-machined end bell also ensures better cooling, improved fit, and greater bearing strength inside the motor. The pinion gear is made from strong MIM technology material and features a D-shaped fitting, making it easy to replace if necessary. It also provides better power transfer than O-shaped pinion gears.

We recommend using it in the following configurations:
32:1 / 18:1
Springs: M100 to M130