DIY Detail Fine Grade Clay Towel

DIY Detail Fine Grade Clay TowelThe DIY Detail Fine Grade Clay Towel is a perforated synthetic decontamination towel that safely removes medium to heavy bonded contaminants from vehicle surfaces. Contaminants the towel removes include: tree sap, water spots, paint overspray, bugs, road debris, and industrial fallout. Measuring 12" x 12", this microfibre flexible edge allows the synthetic clay to effortlessly comply with all the vehicle's body contours. Use this Fine Grade Clay Towel

The DIY Detail Fine Grade Clay Towel is a perforated synthetic decontamination towel that safely removes medium to heavy bonded contaminants from vehicle surfaces.

Contaminants the towel removes include: tree sap, water spots, paint overspray, bugs, road debris, and industrial fallout. Measuring 12" x 12", this microfibre flexible edge allows the synthetic clay to effortlessly comply with all the vehicle's body contours.

Use this Fine Grade Clay Towel during the wash process or during a standard decontamination process. Unlike clay bars, synthetic decontamination "clay" towels allow you to rinse off contaminants after using - providing you with a product that will last.

Directions:

**Use on cool surface and out of direct sunlight. Make sure you are using a clay lubricant on the surface to avoid clay transfer to vehicle**

Wash Process:

• Remove all loose dirt and debris from the vehicle.
• Spray a clay lubricant on the clay towel & over the entire vehicle, focusing on one panel at a time.
• To avoid cross-contamination, start at the top of the area you are working with then move to the bottom. 
• Make sure your clay towel stays lubricated as you continue working on the vehicle. Once you have finished every panel, your vehicle is properly decontaminated.

Standard Decontamination Process:

• Wash and rinse vehicles surface to remove loose dirt and debris.
• Perform your decontamination panel by panel with the clay towel.
• Making sure you thoroughly coat the panels surface with a clay lubricant.
• With the lubricated clay towel & surface, start rubbing the clay towel over the panel you are treating until it glides smoothly.
• Using a clean microfibre towel, wipe off all remaining clay lubricant and dry the decontaminated panel before moving onto the next. 

Size: 12x12" (30cmx30cm)