Pay in installments of $204.03 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 28 - Aug 2
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Infrarood dieselstraler Pro 16 kW silver 180-920 m³ MW ToolsFluisterstille dieselstraler 16 kW met aangename infrarood warmtestraling, voor ruimtes tot 920 m. Professioneel en compact model made in Korea, ideaal voor ateliers, garages, showrooms, loodsen en kassen, sierteelt, mobiele werven, tenten, openbare ruimtes, overdekte buitenruimtes, outdoor winterevents zoals markten of wedstrijden. Voordelen: Heater van topkwaliteit: productie en componenten made in Korea. Model 16 kW, verwarmt oppervlaktes van 50
Fluisterstille dieselstraler 16 kW met aangename infrarood warmtestraling, voor ruimtes tot 920 m³.
Professioneel en compact model ‘made in Korea’, ideaal voor ateliers, garages, showrooms, loodsen en kassen, sierteelt, mobiele werven, tenten, openbare ruimtes, overdekte buitenruimtes, outdoor winterevents zoals markten of wedstrijden.
Voordelen:
- Heater van topkwaliteit: productie en componenten made in Korea.
- Model 16 kW, verwarmt oppervlaktes van 50 tot 270 m² en ruimtes van 180 tot 920 m³
- Directe en comfortabele warmtestraling. Zeer geschikt voor loodsen en werkplaatsen waar geregeld poorten open gaan en koude lucht binnen komt. Verwarmt direct mensen en objecten zonder dat de lucht in de ruimte verwarmd moet worden.
- Geen luchtverplaatsing. De warmte wordt verspreid dankzij de gloed van de stalen buizen, er is geen ventilator en dus ook geen storende wind of geluidsoverlast zoals bij klassieke warmeluchtblazers
- Laag brandstofverbruik: 1,5 liter per uur. Werkt op diesel.
- Met slechts 56 decibel werkt deze heater zeer stil
- Door de grote stralingsoppervlakte geeft de heater zijn warmte gelijkmatig af aan de omringende ruimte op de juiste hoogte voor zowel staand als zittend werk.
- Complete verbranding: 99,9% van de brandstof wordt verbrand. Geen rookontwikkeling
- Grote tank en een lange werkduur van meerdere werkdagen zonder bijvullen.
- Geschikt voor mobiele gebruik (zonder schouw) of voor semi-vast gebruik met optionele schouwset. (Optionele schouwset inox WDKBS).
Capaciteit:
- Vermogen: 16 kW
- Voor oppervlakken van 50 tot 270 m²
- Voor ruimtes met inhoud van 180 tot 920 m³,
- Temperatuurbereik: 5-40 °C
- Brandstofverbruik 1,5 liter /uur
- Brandstoftank 45 liter
- Autonomie: 26 uur (continu)
- Elektrisch verbruik: 58 Watt
Kenmerken:
- Danfoss sproeikop van hoge kwaliteit
- Inox rookanalen met 2 keramische filters voor een optimale filtering van roetdeeltjes en geluidsreductie. Dikte van het rookkanaal: 0,4 mm
- Met de optionele schouwset worden alle rookgassen naar buiten afgevoerd
- Onderhoudsvriendelijke en stootvaste behuizing met silver coating
- Ingebouwde thermostaat 5-40°C op het digitaal bedieningspaneel
- Compacte afmetingen: lengte 1300 mm, diepte: 320 mm, hoogte: 1120 mm
- 24-uur timer instelling
- Draadloze afstandsbediening
- Uitgebreid LCD display met weergave van: actuele temperatuur, thermostaat temperatuur, timer instelling en displayvergrendeling
- Rubber wielen 60mm voor makkelijk verplaatsen, ook over oneffen vloeren zoals roosters of rube beton. 2 wielen met rem.
- Geleverd met afschermhoes voor het stofvrij opbergen na gebruik.
- Frontrooster en stalen achterwand zijn demonteerbaar voor makkelijk onderhoud
- IP24 waterdicht
- 12 beveiligingen met alarmen voor o.a. laag brandstofniveau, omkantelen, ontstekingsfout, oververhitting, overspanning, motorbescherming, vlambewaking.
- 1,8 meter lange stroomkabel met stekker
Hoe kies ik het juiste vermogen?
- Dit model 16 kW is geschikt voor het verwarmen van ruimtes met inhoud van 180 m³ tot 920 m³, afhankelijk van de isolatie en de ventilatie van de ruimte. Hoe beter de isolatiewaarde van de bouwelementen (lagere K-waarde), hoe groter de ruimte die u kan verwarmen.
- Minimaal verwarmbaar volume van 180 m³ (K-waarde 2,5: ongeïsoleerd gebouw, enkel glas, volle stenen muren, dak met oude platen, ruimtes waar poorten geregeld open staat)
- Maximaal verwarmbaar volume van 920 m³, (K-waarde 0,5: recent gebouw)
Opties:
- Rookgas afvoerset 2 meter met 90° bocht, uit roestvrij staal. (ref. WDKBS)
- Jerrycan PE 10 liter (JERRYC10)
- Jerrycan PE 20 liter (ref. JERRYC20 )
- Mobiele brandstoftank 53 liter (ref. TBC53M)
- Mobiele dieseltank 75 liter met handpomp (ref. TBC75M)
- Power station voor off-grid verwarming (ref. PS3000)
Opmerking:
Geschikt voor professioneel gebruik in ruimtes met voldoende ventilatie. Zorg voor voldoende verluchting, om zuurstoftekort en een te hoge waarde van koolmonoxide te voorkomen. Gebruik de heater niet in afgesloten ruimtes en residentiële gebouwen. Het is aangeraden om preventief een CO-sensor te installeren.
Onderhoudstip:
Laat uw heater jaarlijks nazien op een correcte werking en onderhoud. Wij kunnen u de juiste parts (brandstoffilter, luchtfilter, sproeier, ...) aanleveren, of het onderhoud voor u uitvoeren. Contacteer onze service afdeling voor meer info.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 12 reviews
Sort
Product Reviews
★★★★★ 5
I love it!!!
Size: M Desk Unfinished 3/4-in and 1/2-in
Easy to assemble, all the pieces were in the box. I set everything out to be sure. Instructions were easy and clear, took about 10 min to put together.
Seems to be quality pipe, strong stable build even at just hand tight. When I put the desk top on it was already level so bonus there.
This kit is a great value, before I found the M desk I was looking on Pinterest for pipe leg designs thinking a trip to the hardware store and I could make it for cheaper, which was not the case. I 100% will recommend, and will purchase again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2020
★★★★★ 5
Real steel pipe
Size: O Desk Unfinished 3/4-in and 1/2-in
This pipe table leg set was great. It's real steel pipe like from the hardware store. It does have a layer of oil on it so that must be stripped using dawn or some other degreaser before handleing and painting. It is also offset in the middle bar so if you use it as a desk you get more leg clearance. I used it as a table base so I bought matching middle braces to set the middle support in the center of the table. Once together it looks great. I highly recommend getting this if you want a good quality pipe base.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2023
★★★★★ 5
Price / Quality - Office Desk - Perfect
Size: H Desk Unfinished 3/4-in and 1/2-in
Purchased two sets to create a custom L shaped desk for the office. Placed a pine stained top. Perfect to handle a monitor, multiple laptops, normal office equipment. Extra benefit is the cross piece at the bottom as a foot rest. Very sturdy while sitting on carpet. Compared to normal pipe material purchased in large box store -- could not have asked for a better product for the price. Looking at other products for additional projects for around the house for the product and vendor. - Highly Recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 27, 2021
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo.
Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side).
I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure.
The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried.
I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable.
The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's.
Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020
★★★★★ 5
So nice I bought twice!
Size: H Desk Unfinished 3/4-in and 1/2-in, Size: H Desk Unfinished 3/4-in and 1/2-in
For starters, this is a great buy if it is exactly what you want. For me that was the case and it would have cost me a good $40 or more to replicate it at a big box store. With that said, if you are not planning on using all of the pieces and want a different configuration, this may not be the kit for you. All of the parts inside are just like if you bought it at a local home improvement store. All the pipes need to be cleaned and protected. I personally found that dish soap (dry off immediately after you clean a piece) was the easiest to clean everything and I finished it with some wax. The kit is sturdy and easily supports the weight of my butcher block tops. I inverted the kit as it is designed as I intend on adding a shelf and am planning on using the support brace to aid in holding that shelf up for cable management. After cleaning and protecting, putting the kit together only took 5-10 minutes and that was with kid disruptions. I purchased 2 so that my wife and I could have matching desks in the office and I couldn't be happier.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 23, 2019