SKU: 82787817713

Carpets Laska 230x160 – bruin | By Boo

$121.05 $134.50
Save 10%
No.2 Bestseller on tworldvietnam.com >

Pay in installments of $33.62 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 5 - Aug 10

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Carpets Laska 230x160 – bruin | By BooLaska cm 160x230 brown Bohemian luxe met speels design De Laska cm is een echte eyecatcher binnen de By Boo stijl en brengt direct sfeer in je interieur. Het design valt op door zijn speelse vormen, rijke textuur en bohemian uitstraling. De brown afwerking zorgt voor warmte en karakter en maakt dit product een subtiele blikvanger. Perfect voor wie houdt van een interieur met persoonlijkheid. Dit Carpets komt prachtig tot zijn recht in de woonkamer,

Laska cm 160x230 - brown

Bohemian luxe met speels design

De Laska cm is een echte eyecatcher binnen de By Boo stijl en brengt direct sfeer in je interieur. Het design valt op door zijn speelse vormen, rijke textuur en bohemian uitstraling. De brown afwerking zorgt voor warmte en karakter en maakt dit product een subtiele blikvanger. Perfect voor wie houdt van een interieur met persoonlijkheid.

Dit Carpets komt prachtig tot zijn recht in de woonkamer, slaapkamer of hal en laat zich makkelijk combineren met andere woonaccessoires. Het ontwerp sluit naadloos aan bij bohemian, eclectische en moderne interieurs. Combineer met natuurlijke materialen, warme kleuren en verschillende texturen voor een gelaagd geheel. Zo voeg je zonder moeite extra sfeer toe aan je ruimte.

Met afmetingen van 160x230 vormt dit item een uitgebalanceerd geheel in elke ruimte. Het product is vervaardigd uit Polyester & katoen en afgewerkt in brown. De hoogwaardige afwerking benadrukt het ambachtelijke karakter en maakt het geschikt voor dagelijks gebruik. Dit item maakt deel uit van de By Boo collectie. SKU: 250259.0.

Breng bohemian luxe in huis met de Laska cm en bestel vandaag nog.

Levertijd & verzending
Dit artikel wordt niet rechtstreeks vanuit de leverancier naar u verzonden. Het product wordt eerst geleverd bij ons centrale magazijn. Zodra het daar binnen is, controleren wij het en maken we het klaar voor verzending naar u.

Indien het artikel bij de leverancier op voorraad is, bedraagt de totale levertijd doorgaans 1 tot 4 weken. Zodra uw bestelling onderweg is, ontvangt u hierover bericht.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 82787817713

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 29 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
Steve M.
Chelsea, US
★★★★★ 5
Works well. You need to drill a 3/8” hole
Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
N
Verified Purchase
Nancy filippi
Cuba, US
★★★★★ 5
A must pull your gimbal bearing
You do need to drill a hole but worked perfect
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 26, 2025
R
Verified Purchase
rich911s
Lake Worth, US
★★★★★ 5
Worked for Volvo Penta SX Gimbal Bearing
Very heavy tool, I was surprised. Pulled my bearing like it was nothing. Putting the new bearing in was a little more difficult as you have to drill a hole in the engine alignment shaft where it will work for your particular outdrive. Not hard, but it does not come pre-drilled as the required depth for each particular gimbal bearing differs by manufacturer and model. Measure your bearing placement before removal and check that it was installed correctly in the first place. The bearing should line up with the grease fitting and the o-rings on the drive shaft should end up riding in the middle of the bearing. once you have your measurement drill the hole, I used a drill press. I suppose you could use it on multiple outdrive models as long as you can drill more holes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2023
G
Verified Purchase
Greg
Port Orchard, US
★★★★★ 5
Great value
This kit worked perfectly on my Alpha one mercury outdrive. I saw a lot of people mention that it was a hassle to drill the hole when you better have all this alignment stuff. I threw it in use my regular drill drill guide and then the second hole was lined up. Pulling Gimble be very easy. I did have to adjust it up at an angle because my bearing was sitting in their crooked and it came out the second time I made the adjustment to the angle. I would highly recommend this.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2024
T
Verified Purchase
Tommy Knapp
Massapequa, US
★★★★★ 1
Unfinished product - doesn't work - waste of money
in order to use this as an installation tool the directions tell you to drill a hole through the 2 inch steel rod..... either this hole should already be drilled, or this should not be advertised as an installation tool..... it will not install any bearings without extensive modification and requires the use of a drill press or a lathe. very dissatisfied that I now have to buy ANOTHER tool just to finish this job because this one doesn't do what it's described to do.... piece of junk... typical amazon garbage.... this is why I haven't used amazon in over a year... they rip you off with garbage.... I should have known better .... don't buy this junk .... Now they say 20 -30 days to get my refund .... Don't waste your time
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026

recommand products

3-Fase Railspot 38W Zwart | CRI95+ | Triac Dimbaar | 3800lmMDRLED®
64.00
PRO-LED-MODULE 2835 0,72W 12V IP67 7000K – 20 Stuks MDRLED®
24.00
Z-WAVE LED STEKKERDIMMER 0-100W FASE AFSNIJDING (RC) MDRLED®
68.78
Universele 50 x LED dimmer Inbouw 0,5-200W Fase Afsnijding – Tijdelijke Actie
187.50
Lucide RUBEN Hanglamp - 1xE27 - Zwart MDRLED
47.00