Adjustable Schroefset Kit geschikt voor Fiat Grande Punto 199 2005-2018 Lowering Ophanging

Adjustable Coilover Kit compatible for Fiat Grande Punto 199 2005-2018 Lowering Suspension

Dit MaXpeedingRods onderdeel is geschikt voor Fiat-toepassingen waar vermeld. Controleer altijd onderdeelnummer, bouwjaar, motorcode en pasvorm voordat je bestelt.

Voordelen

• Gebaseerd op originele MaXpeedingRods productinformatie
• Geschikt voor directe vervanging of prestatie-upgrade

Toepassing, specificaties en compatibiliteit

Introductionma Xpeedingrods-B1series is ideal for those who want to change the old worn-out strut but improve handling at the same time. It features height adjustable and maintains the OE ride quality to the greatest extent.Toepassing Geschikt voor Alfa Romeo Mito (Type 955) 2008–2018geschikt voor Fiat Grande Punto (199) 2005–2018geschikt voor Vauxhall Corsa D (S07) 2006–2014 Specificaties Top mounts: Front and rear OE top mounts required Damping adjustable: Not available Camber adjustable: Not available Height adjustable: Yes, lowering 0-25mm depending on the vehicle models Spring rate Front: 7 kg/mm (392 lbs/in)Spring rate Rear: 4 kg/mm (224 lbs/in)Front spring inner diameter: 64-73.5 mm Rear spring inner diameter: 62-96.5 mm Spring length Front: 151 mm Spring length Rear: 182 mm Help spring rate Front: 1 kg/mm (56 lbs/in)Help spring length Front: 102 mm Spring Preload advised: 7-10 mm Color: Black body with black spring Package included Package included：2x Front coil-overs2x Rear coil-overs2x C spanners Kenmerken1.0-25mm(depends on vehicle models) lower height adjustable2. Dust boot, solid rubber bump stops3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets4. Simple install,Easy to adjust.5. Use the vehicle's original upper mounts (not included in our product kit).Let op1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen. 3. Impact wrench is prohibited during the installation, it will loosen or damage the product.4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-5 months will keep it smooth and clean, which helps to extend the lifetime.