Hot and Cold Side Boot Kit for 1999.5-2003 Ford F250/F350, 7.3L Powerstroke

Hot and Cold Side Boot Kit for 1999.5-2003 Ford F250/F350, 7.3L PowerstrokeSome trucks need (2) 3x3. 25 couplers and some need (2) 3x3 couplers. We included 2 of each to ensure you have the correct boots. Comes with a complete set of T Bolt clamps (12) and (2) hose clamps. Only use the T Bolt clamps on the lower spider bolts if they have been reinforced with Riff Raff Plenum inserts. Use the hose clamps if they have not been reinforced. BUILT TO LAST A LIFETIME. The S&B intake plenum and intercooler boots made with aramid

• Some trucks need (2) 3”x3.25 couplers and some need (2) 3”x3” couplers. We included 2 of each to ensure you have the correct boots.
  
  
• Comes with a complete set of T-Bolt clamps (12) and (2) hose clamps. Only use the T-Bolt clamps on the lower spider bolts if they have been reinforced with Riff Raff Plenum inserts. Use the hose clamps if they have not been reinforced.

BUILT TO LAST A LIFETIME.

The S&B intake plenum and intercooler boots made with aramid reinforcement and extremely strong silicone rubber to last the lifetime of your vehicle. The boots replaces the failure prone intake boot and is backed by our lifetime warranty so you never have to worry about buying another boot kit again.

NEW HARDWARE & 2 EXTRA BOOTS INCLUDED.

This intake boots comes with stainless steel hose clamps so you don't have to reuse the old OEM clamps. Since some trucks have a 3.25" intercooler outlet and some have 3". We included both so you don't get half way through the install and realize you have the wrong boots