BG FFBTDS1B-K Flatplate Screwless 2-Way Secondary 200W Single Touch Dimmer Switch - Matt Black (Black)

BG FFBTDS1B-K Flatplate Screwless 2-Way Secondary 200W Single Touch Dimmer Switch - Matt Black (Black)BG FFBTDS1B K Flatplate Screwless 2 Way Secondary 200W Single Touch Dimmer Switch Matt Black (Black) Slimline Matt Black screwless accessories available in a range of decorative metal finishes Screwless front plate, easy clip on off No visible plastic around switches Sleek flat profile Angled in line colour coded captive terminals Twin Earth Nexus Screwless Flatplate is available in three stocked finishes Brushed Steel Polished Chrome Black Nickel

BG FFBTDS1B-K Flatplate Screwless 2-Way Secondary 200W Single Touch Dimmer Switch - Matt Black (Black)

Slimline Matt Black screwless accessories available in a range of decorative metal finishes

• Screwless front plate, easy clip on/off
• No visible plastic around switches
• Sleek flat profile
• Angled in-line colour coded captive terminals
• Twin Earth

Nexus Screwless Flatplate is available in three stocked finishes

1. Brushed Steel
2. Polished Chrome
3. Black Nickel

This item is Single 2 Way Secondary

• Intelligent trailing edge dimmers have a lower minimum load than leading edge dimmers, offering greater compatibility for LED, Halogen, CFL and incandescent lamps
• Soft start brings the lights to a set level in around 1 second and extends the life of lamps
• Overload protection prevents failure if you mistakenly connect your dimmer to too many lights or transformers, and will turn the lights down or off until the load is corrected
• Smooth dimming control
• Silent operation - no noise when dimming
• Support for lower wattage lamps eliminates flicker
• Touch dimmer control
• Captive backed out terminal screws prevent screw loss
• Silent operation - no noise when dimming
• Manufactured to BS EN 60669-2-1
• Terminal capacity 3x1.0mm², 2x1.5mm² & 1x2.5mm²
• Minimum mounting box depth - 25mm

Load Rating (Max/Min per module)

• Dimmable LED 5-100W
• Tungsten/Incandescent 5-200W
• Halogen 20-200W
• Dimmable Compact Fluorescent (CFL) 5-100W

Installation Note

• Master can only be used in a one way switching circuit where one switch controls a light (or circuit) i.e. on or off.
• For two way switching, where a light (or circuit) is controlled by two switches, the master touch dimmer must be used with a secondary touch dimmer at the secondary location.
• A master touch dimmer cannot be used in combination with a traditional light switch or any other dimmer switch.