SKU: 25623236202

Furuno Bbds1 Sounder Box

$382.50 $425.00
Save 10%
No.2 Bestseller on tworldvietnam.com >

Pay in installments of $106.25 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 7 - Aug 12

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Furuno Bbds1 Sounder BoxThe BBDS1 is a new network fish finder for NavNet 3D and NavNet TZtouch that features an all new bottom discrimination function, as well as the FDF (Furuno Digital Filter) capability of the DFF1. The BBDS1 determines the bottom structure and separates them into the following categories: mud, sand, gravel, and rock. This is achieved by analyzing echo characteristics from the bottom components such as particle size and hardness. Connect the BBDS1 to

The BBDS1 is a new network fish finder for NavNet 3D and NavNet TZtouch that features an all new bottom discrimination function, as well as the FDF (Furuno Digital Filter) capability of the DFF1. The BBDS1 determines the bottom structure and separates them into the following categories: mud, sand, gravel, and rock. This is achieved by analyzing echo characteristics from the bottom components such as particle size and hardness.

Connect the BBDS1 to your NavNet 3D or NavNet TZtouch network and get ready for your NavNet system to provide you with valuable information to locate rich fishing grounds, boosting your catch.

There are two bottom discrimination display modes to select from, Standard Mode and Probability Mode. In Standard Mode, the most probable materials on the bottom (mud, sand, gravel or rock) are indicated in either graphic mode or a 4-color bar on the bottom of the display.

Because bottom material can change frequently and can sometimes be difficult to identify, Probability Mode shows you what material the bottom has the greatest chance of consisting of by displaying the possible bottom materials proportionally within the 4-color bar.

Standard Features:

  • Frequency: 50/200 kHz alternately transmitted
  • Output Power: 600 W/1 kW
  • Power Supply: 12-24 VDC: 1.1-0.4 A (in output power of 1 kW)
  • Temperature : -15 to + 55 degree Celsius (in operation)
  • Relative Humidity: 93% at 40 degree Celsius
  • Waterproofing: IP20 (not waterproofed)

Required Conditions for Bottom Discrimination

  • Detection Range: 5-100 m
  • Boat Speed: 0-10 kn
  • Transducer mounting: Thru-hull or transom mount only
  • MFD8/12/BB software: v2.06 or later

Notes:
1. The result shown by this function may sometimes be different from the actual bottom components.
2. For best performance, do not use in-hull mounted transducers with the BBDS1.
3. The BBDS1 may show an incorrect ground discrimination result, especially when there is a big fish school right under the boat. This is because enough echoes may not be received from the bottom.
4. Materials such as shell, coral, or a sunken ship are indicated as the most similar material from the four bottom categories: mud, sand, gravel, or rock, according to reflected echoes.
5. Auto mode is automatically activated when the bottom discrimination function is turned on. (Manual mode is not selectable.)
6. The BBDS1 is not compatible with NavNet 1 or NavNet vx2.
7. Appropriate Furuno Transducer recommended for best resluts
 

  • Transducer options (see table below):
    • Bottom Discrimination Fish Finders will function as a standard Fish Finder with other transducers, however, the ground discrimination mode will be disabled
    • Due to power and frequency requirements for bottom discrimination signal processing, in-hull or "shoot-thru" transducers are not compatible
These Transducers WILL Work With Bottom Discrimination
Transducer Descritpion FCV627 FCV587 BBDS1
520-PSD 600w Plastic Thru-hull * * *
520-5MSD 600w bronze Thru-hull * * *
525-5PWD 600W Transom Mount * * *
525STID-MSD 600w Bronze Thru-Hull Multi Sensor * * *
525STID-PWD 600W Transom Mount Multi-Sensor * * *
CA50/200-12M1 1kW Bronze Thru-Hull   * *
CA50/200-1T1 1kW Rubber Coated   * *
1 MB1100 us Required for this Transducer

 

These Transducers WILL NOT Work With Bottom Discrimination
Transducer Description FCV627 FCV587 BBDS1
ST-01PTB Plastic Transom Clip-On Speed and Temp Sensor (6-Pin) with Bracket * * *
ST-02MSB Bronze Thru-Hull Speed and Temp Sensor (6-Pin) * * *
520-IHD Plastic In-Hull Transducer, 600W (10-Pin) * * *
525STID-MSD7 Bronze Thru-Hull Multisensor with 7 Inch Stem, 600W (10-Pin) * * *
525T-BSD Bronze Thru-Hull Transducer with Temp, 600W (10-Pin) * * *
525TID-BHD Bronze Thru-Hull Transducer with Temp and High-Speed Fairing Block, 1 kW (10-Pin)   * *
525TID-TMD Transom Mount Transducer with Temp, 1kW (10-Pin)   * *
525T-LTD/12 Bronze Thru-Hull Transducer with Temp, 600W (10-Pin), 12° Tilted Element * * *
525T-LTD/20 Bronze Thru-Hull Transducer with Temp, 600W (10-Pin), 20° Tilted Element * * *
525T-PPD Plastic Puck Transducer with Temp, for Trolling Motors, 600W (10-Pin) * * *
526TID-HDD Bronze Broadband Thru-Hull Transducer with Temp, Built-in Diplexer and Hi-Speed Fairing Block, 1kW (10-Pin)   * *
AIRB1641210F Bronze Thru-Hull, Low Profile Transducer with Temp, 1kW (10-Pin), 12° Tilted Element   * *
AIRB1642010F Bronze Thru-Hull, Low Profile Transducer with Temp, 1kW (10-Pin), 20° Tilted Element   * *
527ID-IHD Urethane In-Hull Transducer, 1kW (10-pin), Broadband   * *
556TID-HDD Stainless Steel Thru-Hull Transducer with Temp and Fairing Block, 1 kW (10-Pin)   * *
CA200B-5 Bronze Thru-Hull Transducer, Type 200B-5, 1kW (No Plug)   * *
CA200B-5S Rubber Coated Transducer, Type 200B-5S, 1kW (No Plug)   * *
CA50B-6B Rubber Coated Transducer, Type 50B-6B, 1kW, 15m Cable (No Plug)   * *
CA50B-6G Rubber Coated Transducer, Type 50B-6G, 1kW (No Plug)   * *
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 25623236202

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 15 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Steve
Pawtucket, US
★★★★★ 4
Solid Kit That Saves You Some Money
Color: Saros 10R/Qrevo CurvX Accessories Kit, Color: Saros 10R/Qrevo CurvX Accessories Kit
I ordered this accessories kit for my Roborock Saros 10R mostly because I didn’t feel like spending a ton just to keep up with teh normal maintenance. After using it for a bit, I can say it’s been doing exactly what I hoped it would. First thing you notice is the cost of course, keeping these robot vacuums running can add up fast, and this kit really helps take the sting out of replacing the usual wear parts. Most of the pieces line up with the Saros 10R really well. Everything went in without a fight and once installed, it all works the way it should. Brushes rotate fine, filters sit where they’re supposed to, and nothing feels janky or poorly sized. Quality wise, it’s pretty close to the name brand stuff. You can tell there’s a small difference if you really look for it on some parts. Some of the plastic feels a bit lighter and a couple items don’t have that same premium feel. But in use, I’m not seeing much of a difference, cleaning performance is still strong and the vacuum hasn’t skipped a beat. Durability is the one thing you can’t fully judge right away. So far though, everything seems to be holding up nicely. No fraying, cracking, or early wear, so I’m cautiously optimistic they’ll last about as long as the originls. Overall, this kit is a good deal for the money. It does what it’s suposed to, saves you some cash, and keeps the Saros 10R running smoothly. Not perfect, but definitely worth it. Four stars.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 10, 2026
J
J. Lam
Whiting, US
★★★★★ 4
most can fit saros 10, but not all
Color: Saros 10R/Qrevo CurvX Accessories Kit, Color: Saros 10R/Qrevo CurvX Accessories Kit
I should have done a little more research with these. I purchased this for a Saros 10, i thought the Saros 10 and 10R was basically the same besides the filters. I was wrong. Although the brushes are the same size, they didnt fit. They lacked a special metal piece on one side, and the 10R has a different shape on the other, cant even jerry rig it to fit. The filters didnt fit my Saros 10, but that didnt cause the dropped rating, but they quality of it looks very good, and seems well made. The side brushes are good and they fit my Saros 10, replaced them and didnt have a problem. The bags also fit and they are very good. The mopping brushes did not fit, but it was very well made and definitely wasnt just a cheap set. The brush and screw driver were just to add additional number counts and basically useless.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 26, 2026
K
Keith McElroy
Battle Creek, US
★★★★★ 5
Everything you need for your robot maintenance
Color: Saros 10r-20/Qrevo Curvx Accessories, Color: Saros 10r-20/Qrevo Curvx Accessories
Automatic floor robots are a great convenience and, at this point, I can't picture our house without one. Being able to turn them on at night and wake up to vacuum and mopped floors is pretty amazing. The problem is that you eventually have to do maintenance on them to keep them running. I guess it's not that much to ask of you since they do go for a long time with only water refills and waste water dumps. It's hard to find kits that are comprehensive enough to cover all the needs, so when I saw this one, I had to pick it up. The kit contains multiples of every consumable on the Roborock (ours is named Mrs. Nesbit). It also comes with a screwdriver and a blade/brush to clean dirt and hair. The small spinning brush is easy to replace, and the only one you need the screwdriver for. The mopping pad functional on the Roborock is one of my favorite features, so having multiple replacements makes this kit very attractive. They simple peel off of the Velcro and lay back the same. The split rollers take a minute to figure out, but you don't need to loosen the screws - they pull right off the U shaped plastic pieces they are attached to, but keep track of which goes with which color because each plastic piece only goes back on its correct side. The easiest to replace is the filter on the dust bin in the robot since it just pops out and the new one fits in. The lasts step is to replace the dust bag in the base itself, which is very simple. Overall, the quality and fit of all the pieces included in this kit were great. I didn't run across anything that was off or I had to force on. While my pads and brushes weren't as bad as my other vacuum (named The Beast), the vacuum had been warning me that their life was coming to an end and I needed to swap them out. Now I have multiple replacements for the future and my Roborock is good to go for many months. I will be picking this kit up again when I run out and wouldn't hesitate to recommend it at this price point.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 10, 2026
N
Nancy
Phoenix, US
★★★★★ 4
Good Budget Replacement Set, but Mop Pads Differ from Original
Color: Saros 10r-20/Qrevo Curvx Accessories
These replacement accessories fit my Roborock Qrevo S5 without any issues. I run my robot daily because I have a dog, so I go through mop pads pretty quickly and have already used this set for a couple of cleaning runs around the house on vinyl floors. The bags seal properly, and I did not notice any loss of suction or performance with the filters compared to the original parts. The biggest difference was the mop pads themselves. They feel noticeably different from the OEM Roborock ones and seem a bit lower in quality. Even so, they still got the job done for normal daily cleaning and handled pet hair and dirt well. Since the original pads also wear out for me after multiple washes, this set still feels like a practical and more affordable alternative overall.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026
S
Super Duper
New York, US
★★★★★ 3
Not as good as the oem accessories
Color: Saros 10r-20/Qrevo Curvx Accessories, Color: Saros 10r-20/Qrevo Curvx Accessories
I have a roborock saros 10r and all of these accessories seem to be compatible and work with my robovac however the quality of them isn’t nearly the same level. The mop pads material are much coarser and less fine than the original. The side brushed bristles weren’t nearly as tightly bound together. The roller brush isn’t as well made. The cleaning performance I think is similar but i suspect they will not last as long as the oem accessories which are just much better made. Over it’s a mix on value.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026

recommand products

Boeing Heritage Coaster Set
12.00
BRIKSMAX Led Lighting Kit for LEGO-10304 Chevrolet Camaro Z28 - Compatible with Lego Icons Building Blocks Model- Not Include the Lego Set
58.37
Supreme Power Volume 2 Powers and Principalities TPB Marvel Comics
10.53
Boeing Carbon Fiber Keychain
12.00
Jay-Be Storage Cover for Crown Folding Bed - Single - Grey
49.46