HKS Hi-Power Exhaust 23+ Civic Type R FL5

HKS Hi-Power Exhaust 23+ Civic Type R FL5Features: Full Straight Pipe achieves Low Exhaust Pressure! The D75mm pipe and full straight structure with no restrictions achieves 30% lower exhaust pressure compared to stock. D119mm Titanium tail with HKS logo is makes a sporty rear view. Highly Emotional and Aggressive Sound! By adopting a bullet shaped silencer for the main silencer and valve less structure, you can enjoy a pleasant exhaust sound that emphasizes not only the bass note but also

Features:
- Full Straight Pipe achieves Low Exhaust Pressure! The D75mm pipe and full straight structure with no restrictions achieves 30% lower exhaust pressure compared to stock. D119mm Titanium tail with HKS logo is makes a sporty rear view.
- Highly Emotional and Aggressive Sound! By adopting a bullet-shaped silencer for the main silencer and valve-less structure, you can enjoy a pleasant exhaust sound that emphasizes not only the bass note but also the treble note. The sound pressure is increased throughout the entire frequency range, resulting in a more powerful sound than the existing LEGAMAX Sports.
- Power output is above stock from 5000 to 6000 rpm, with a maximum increase of 3.6Kw.
- Torque increases up to 7.5 Nm around 3000 rpm and exceeds the stock from 5000 rpm to 6000 rpm
- Exhaust pressure is reduced by about 30% compared to the stock exhaust pressure and exhaust efficiency is improved, so further power increase can be expected by rewriting the ECU.
- Exhaust sound level is increased by 13dB compared to the stock. 9dB increase compared to existing HKS LEGAMAX Sports.
- In terms of sound quality, not only the bass range but also the treble range has increased significantly compared to the stock system, and compared to the LEGAMAX Sports, the frequency waveform is similar, but the overall sound pressure has increased, resulting in a more powerful exhaust sound. - The more you step on the gas pedal, the more you can enjoy the elated exhaust sound.
- Although the stock muffler has a valve mechanism, this product is valveless.
- By using the supplied actuator, error codes that may occur due to the valveless design can be avoided.
- Included actuator replicates the mechanism of the stock valve. By attaching the stock motor, the actuator moves in the same operation as the stock valve, thus eliminating error codes.

Specifications:
- Main Material: SUH409/SUS304
- Tail Tip Diameter: D 119mm
- Main Pipe Diameter: D 74.7mm > D 60.5mm x2
- Sound Level (Approximate): HKS 93dB (Idle?75dB?
- Minimum Ground Clearance: 125mm (Front Splash Guard)