Pay in installments of $270.08 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 9 - Aug 14
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Stahlwille MANOSKOP Angle and Torque Wrench, Size 10 - ST 96500910Stahlwille MANOSKOP Angle and Torque Wrench, Size 10 ST 96500910 The MANOSKOP Angle and Torque Wrench is a precision tool designed for accurate torque application and angle measurement, making it ideal for automotive and mechanical tasks. Featuring a user friendly interface and durable construction, this wrench ensures optimal performance and reliability, allowing you to work confidently on any project. Features: An angle and torque wrench for bolted
Stahlwille MANOSKOP Angle and Torque Wrench, Size 10 - ST 96500910
The MANOSKOP Angle and Torque Wrench is a precision tool designed for accurate torque application and angle measurement, making it ideal for automotive and mechanical tasks. Featuring a user-friendly interface and durable construction, this wrench ensures optimal performance and reliability, allowing you to work confidently on any project.
Features:
- An angle and torque wrench for bolted joints in accordance with the torque, angle of rotation, torque with "angle of rotation" monitoring variable and angle of rotation with "torque" monitoring variable tightening method
- Electromechanically displaying (with electronic measurement) and triggering (with the familiar mechanical "click")
- Simple documentation of the recorded measurements on the PC via the USB interface and via an optional Bluetooth Low Energy module
- Thanks to the combination of the patented electromechanical triggering and the display and acoustic feedback, the wrench provides signaling with maximum optimization
Properties:
- Electromechanical triggering
- Acoustic and visual trigger signal
- 4 Measuring modes (torque, angle of rotation, torque with 'angle of rotation' monitoring variable, angle of rotation with 'torque' monitoring variable)
- High-resolution color OLED display and side signal lights
- Visual evaluation of the bolted joint - yellow light (pre-warning threshold reached), green light (within tolerance range), red light (measurement outside tolerance range)
- Freely configurable menu structure
- Battery compartment/battery pack with bayonet connection
- Optional - Li-ion battery no. 7195-2 And charger no. 7160
- 3 Function modes - triggering (patented electromechanical triggering), peak-hold (indicating mode with peak value display) and track (indicating mode with actual value display)
- Micro USB interface for data communication
- Optional Bluetooth low energy-module (5.2)
- QuickRelease safety lock - switching system for insert tools
- Data storage for up to 2,500 processes, including date and time stamp
- Up to 200 joints in a maximum of 25 guided sequences can be programmed
- Different tolerance limits adjustable depending on the type of bolted joint
- Fast and precise setting via the keypad
- No unintentional adjustments thanks to password-protected keypad lock
- Acoustic and visual signal warns of torque wrench overload and forced triggering in clockwise tightening mode
- Automatic indication of the next calibration date, user-configurable according to elapsed time and/or number of operations
- Fully automatic calibration and adjustment with the perfectControl calibration and adjustment device No. 7794-2 (Torque) or 7794-3 (torque and angle of rotation) for reducing error influencing factors
- Units of measurement - N.m, ft.lb, in.lb
- Automatic extension length correction - when an insert tool with a non-standard extension length is used, input the extension length to ensure that the required target value is achieved
- Ready for operation again immediately after release
- Clockwise and anticlockwise tightening - the insert tool must be flipped over for anticlockwise torque in 'triggering' function mode
- Torque and angle of rotation displays simultaneously
- Measurement regardless of the force application point (for sizes 1, 2, and 4)
- Safe handling due to the ergonomically shaped 2-component handle (resistant to the most common oils, greases, fuels, brake fluids and Skydrol)
- 3 Certificates included (torque indicating/triggering in accordance with DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)
- In sturdy plastic box (sizes 40-100 in steel box)
- Registered design, patented
- Supplied with SensoMaster 4 software, USB cable, 4 batteries AAA/LR03, 1.5 V
- Angle of rotation display resolution 0.1 Deg
- Angle of rotation accuracy +/- 1 deg, +/- 1 digit to 100 deg, >100 deg at least 1%, +/- 1 digit
- Torque display resolution <= 60 N.m:0.01 N.m, > 60 N.m:0.1 N.m, > 400 N.m:1 N.m
- Torque accuracy +/- 2%, +/- 1 digit
Technologies and Features:
- 2-Component handle
- Our 2-component handle is non-slip and ergonomically designed. It is resistant to the most common oils, greases, fuels, brake fluids, and Skydrol. The arrow markings on the handle indicate the direction of operation
- QuickRelease
- The QuickRelease safety lock prevents unintentional loss of insert tools. These click securely into place, and are only released again at the push of a button for a quick tool change. In transducers - The QuickRelease safety lock helps you to quickly mount and change transducers. The transducers lock into the calibration system and only unlock again at the push of the buttons
- DIN EN ISO 6789-2
- Our torque wrenches and torque screwdrivers are professionally calibrated in accordance with DIN EN ISO 6789-2 and delivered with a corresponding calibration certificate. We also calibrate angle-controlled torque wrenches in accordance with VDI 2648-2. This ensures the accuracy and traceability of our tools
Product Highlights:
- Angle of rotation and torque measurement
- Our torque and angle wrenches make it possible to tighten bolted joints in accordance with the torque, angle of rotation, torque with 'angle of rotation' monitoring variable and angle of rotation with 'torque' monitoring variable tightening method. Thanks to this functional diversity, the wrench is suitable for the most popular tightening methods
- Electromechanical clicking type
- The MANOSKOP with patented electromechanical release measures the applied torque electronically. A visual evaluation of the bolted connection is provided by a display and signal lights on the side. Unlike a purely electronic torque wrench, the cycle and haptic user feedback are also mechanical. A clearly perceptible cycle and an equally audible click indicate that the target value has been reached
- Comprehensive documentation
- Our electromechanical torque wrenches can be documented. They can be easily configured and programmed using the SensoMaster software. This means that all data can be read out, stored and subjected to further processing on the PC for better monitoring and optimization of the work processes. The digital measurement also allows the actual torque which has been applied (actual value) to be specified after triggering, as well as the target value
- Also suitable for difficult application areas
- STAHLWILLE electromechanical torque wrenches are ideal for application areas in which electronic torque wrenches are pushed to their signaling limits - such as when working overhead or if the display cannot be read off. Even in noisy, busy and very bright environments which can make it difficult to perceive vibrations or visual and acoustic signals, electromechanical torque wrenches use patented haptic feedback to indicate that the target value has been reached
- More reliability
- Our electromechanical torque wrenches minimize operating errors. Screw joints and sequence plans, for example, can be parameterized and saved. The torque wrench then automatically sets the clicking type torque for the selected bolted joint. The clicking type torque is also specified digitally so that parallax effects (errors caused by to an incorrect reading angle), which are possible when using a mechanical scale are eliminated
- Perfect entry level solution
- Electromechanical STAHLWILLE torque wrenches make it easier to switch from purely mechanical to documenting torque wrenches. Users who previously only worked with mechanical wrenches become accustomed to them more quickly because our electromechanical torque wrenches provide maximum optimized signaling with haptic, acoustic and visual feedback. This simplifies the switch to digital technology
Specifications:
- Size: 10
- Battery Type: Micro (AAA) 1.5V
- Height (h): 23mm
- Length (L): 466mm
- Measuring Range: 10 - 100 N.m, 7.4 - 75 ft.lb, 90 - 900 in.lb
- Internal Square Tool Holder Size: 9 x 12mm
- Weight: 1085 g
Refer Line Drawing Image:
- LF: 428mm
- SF Size: 17.5mm
- Width (b): 28mm
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 6 reviews
Sort
Product Reviews
★★★★★ 5
Great Starter Knife Set With Everything You Need
Size: 9-Piece, Style: Traditional Handle Design
5/5 stars for the Amazon Basics High Carbon Stainless Steel Knife Set. I have been really impressed with this set overall and it has handled pretty much every kitchen task I have thrown at it so far. Right out of the box the knives were insanely sharp and felt much higher quality than I was expecting for the price.
One of the biggest pros is the variety of knives included. It comes with basically every knife you would need for normal cooking and kitchen use which makes it a great all-in-one set. The knives also have a really nice weight to them and feel balanced in the hand instead of feeling cheap or flimsy. The grip is nice as well not slippery and while using it I feel like it stays put in my hand. They have held up well with regular use and have been easy to clean after cooking. The high carbon stainless steel has also done a good job resisting rust and staining which is important for a set that gets used often.
Another nice addition is the included honing rod which helps maintain the edge and keep the blades performing well over time. I did notice that the edge on the knife I use the most has started to wear down a tiny bit after extended use, but that is expected with pretty much any frequently used kitchen knife and can usually be maintained with regular honing.
As for cons, the wooden knife block is nice looking but I could see it potentially cracking over time if it is not taken care of properly or exposed to too much moisture. Other than that, I really do not have many complaints with this set.
Overall I think this is a fantastic knife set for anyone who just moved out and needs a complete kitchen setup or for someone wanting to replace an older worn out knife set. I actually gifted a set to my in-laws already and they have been loving it as well. I would definitely recommend it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 28, 2026
★★★★★ 5
Good For Living On The Edge
Size: 9-Piece, Style: Traditional Handle Design
It was past time to replace my dollar store chef knife with a decent set with a bread knife and no steak knives. I first looked at Wüsthof as I always liked that brand, but never owned any. I used a borrowed paring knife for a while and was impressed with the quality. My line cooking time is over and though I would have liked to have a set of forged Wüsthofs, the price was too much for occasional use. My favorite chef knife was a 10" wide Victorinox/Forschner until it got stolen. I replaced it with an 8" version, but it was not wide and felt very different. Still my first choice for stamped high-carbon stainless steel blades. Again, the price for a set was a bit high for use once in a while.
I spotted the Amazon Basics 9-Piece Premium Kitchen Knife Block Set. Wait. A forged high carbon stainless steel knife set for that price? I read through all the reviews even the one with the picture of the broken knife, the set seems to be a good buy. Certainly better than a dollar-store knife and a few dollars more than an empty knife block.
While I haven't given them a good workout on food yet, I can tell they are very good given the price. I would have liked the chef's knife to be a bit wider, but I can live with it as is. I tried the index finger and thumb holding test on the chef knife and it was comfortable, but not so much on the Santoku knife. I am new to the Santoku Knife. I guess I would hold and use it more like a cleaver. The knives all feel pretty sharp out of the box, though like nearly all new knives, they need some fine-tuning to be really sharp.
Sure they are not a top-name branded knife set and if I was still a working line cook I would choose a different set, but as a casual home cook, I like these very much.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 2, 2023
★★★★★ 5
Great set of knives balanced between cost and quality
Size: 9-Piece, Style: Traditional Handle Design
I was in the market for a new set of knives because my old set, a long ago gift from my well intentioned parents, was serrated. I have also had some "fancier" knives over time as well including a Wushtof chef's knife and a Shun santoku knife. So when I started looking to replace my knife set, I started looking at various different brands.
My main goal was to find a balance between the quality of the knives and the cost, as in many cases, knives can get expensive pretty quickly. I also knew that I didn't really need the steak knives that often come with these sets because we hardly entertain, which means not a significant need for steak knives.
When I saw these, I thought "This can't be for real for this price..."
The knives work well, offering all the sizes and types I need for basic cooking. They are balanced fairly well, and while I could see some people not liking the plastic handles rather than wood, it doesn't really bother me. They are comfortable both in my grip and also in my wife's, who has smaller hand than I do. We find them easy to work with, from meats to fruits and veggies. They feel pretty solid, and appear to be full tang knives (all one piece of metal down through the handle, not welded together). I am pretty confident they will hold up for years with regular care, all at a price that is at or below many other introductory sets of knives.
The block is a basic block of solid wood, as you would expect with most knife sets. The holes for the knives aren't cut exactly to the blade sizes, but honestly it doesn't really matter that it's not exact, as all the knives are able to fit in the slots. The rubber feet keep it in place on the counter, and the block is sealed/laminated to stand up to standard kitchen wear and exposure.
I would recommend this set to anyone who is looking for a good balance between quality and cost, who needs a good set of knives to get them going in the kitchen and be functional, without breaking the bank.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 3, 2015
★★★★★ 4
Excellent set at an affordable price
Size: 18-Piece, Style: Traditional Handle Design
I'm not a chef, nor a knife aficionado. My wife and I both enjoy cooking and prepare our meals at least 5 days a week. We had a medium quality knife set that was around 13 years old. Due to improper cleaning (placed in the dishwasher most of the time) the blades dulled and rust spots appeared.
We decided that a high end set might be a nice gift to ourselves, and looked at the premium brands available. Being non-professionals I started to feel uncomfortable spending upwards of $300 on a knife set.
I have been watching these knives for a while now, and have read countless reviews, both good and bad to help me decide if these are worth getting. Having purchased other Amazon Basic items I felt that these were a safe bet, and if I were unhappy I could easily return them.
Upon arrival the knifes looked fantastic. They were very nicely packaged and easy to safely unpack. The block was in perfect condition (some reported cracks upon arrival). I inspected the knives and all appeared to be in perfect condition showing no dings, burrs or warping. After a quick hand wash and dry I placed them all in the block. I did have a slight issue with one of the steak knife slots not fully cleared and preventing the knife from sliding all the way down. I was easily able to clear it using an old steak knife as there was only a wood chip stuck in the slot.
I have used the knives about every day for the past 2 weeks and so far the are great to use. Very comfortable, super sharp and they clean up well. The only issue I have had is the Scissors come apart very easily, I've had them fall apart while using them twice already. I will see about adjusting the tension on the connection, but honestly the scissor is not very important to me and I don't mind replacing them with higher quality kitchen scissors if need be. Overall we are very happy with this purchase and I expect that with proper cleaning these knives will last a very long time.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 2, 2019
★★★★★ 5
Forged Knives at a Stamped-Knife Price
Size: 18-Piece, Style: Traditional Handle Design
Purchased as a gift for a friend suffering with an old, rusted, chipped set of cheap big-box knives.
As far as I can tell, these are one-piece forged/milled knives with a full tang... no idea how Amazon gets them so cheap. I have a set of J.A. Henckels Four-Star that were 5x the price, and these knives are almost as nice in fitment and quality. Some of the grinds at the bolster aren't quite symmetrical, but nothing that functionally affects the knife. Not show-dogs, just old reliable mutts that get you where you need to be.
Knives have a good weight and balance, not too heavy but sit well in the hand and have a nice action. The edge out of the box is only average, and the chef's knife had a decent roll to the edge out of the box. However, they sharpen easily and can take a fine edge with a little work with the steel (no word on edge longevity yet, they don't cook that often).
The shears come apart for cleaning (which is nice), although I found it a little too unstable when opening them wide, the rivet is at 90* so when taking a big bite they have a tendency to come apart rather than scissor. Changing to a design that doesn't separate until they're fully open would make them much better.
The woodblock is pine, and had a distinct pine scent out of the box (I suppose this is an area where they saved money, I would pay a premium to get a bamboo block instead). The exterior was well-finished, but the interiors of the knife slots did have some rough spots and/or splinters from the milling. Nothing that stops it from working as intended, a little back and forth solved the majority of problems.
Friend hand washed them after receiving them, but left them damp. Water spots, but no rust on any of the blades, the steel had light surface rust that came off with a scrubby sponge and soap. Overall I remain optimistic they will stand up to the abuse of a forgetful cook.
Having bought expensive German steel, and now these, I daresay I would probably be unable to tell the difference between the two in the kitchen.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 27, 2015
recommand products
Vibrant Aluminum Thread On Replacement Flange for Tial style Blow Off Valves
27.00
Versus Vouge 2223 Limited 20X8.5 +45 5x108 Glossy Black
380.48
Vibrant Univ Oil Feed Kit 2ft Teflon lined S.S. hose with two -3AN female fittings preassembled
29.00
Vibrant -12AN to -12AN Straight Union Adapter Fitting - Aluminum
15.00
Vibrant -12AN to 3/4in NPT Straight Adapter Fitting - Aluminum
12.00