Pay in installments of $537.38 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 5 - Aug 10
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
JBL Synthesis SCL-5 In-Ceiling SpeakerThe SCL 5 is the highest performing round in ceiling model in the JBL Synthesis Custom Loudspeaker (SCL) series. It is designed for deployment in high performance immersive audio systems in medium to large size rooms. The SCL 5 features JBLs patented 2409H 1 inch (25mm) compression driver mated to an offset High Definition Imaging (HDI) horn. This patented horn design is integrated with an angled 7 inch (180mm) Advanced Aluminium Matrix cone cast
The SCL-5 is the highest performing round in-ceiling model in the JBL Synthesis Custom Loudspeaker (SCL) series. It is designed for deployment in high-performance immersive audio systems in medium to large size rooms. The SCL-5 features JBL’s patented 2409H 1-inch (25mm) compression driver mated to an offset High Definition Imaging (HDI™) horn. This patented horn design is integrated with an angled 7-inch (180mm) Advanced Aluminium Matrix cone cast-frame woofer operating behind an acoustic aperture waveguide. The innovative configuration yields incredibly smooth and consistent performance for off-axis placement up to 60 degrees from the listening position. Premium components are used throughout the crossover network including a boundary gain adjustment switch while high-quality gold-plated push type speaker terminals ensure a secure connection. Installation is simple and quick with the new Cat Claw mounting mechanism that allows the speaker to be securely clicked into place freeing up two hands for tightening it down flush to the surface of the ceiling. Round and square zero bezel magnetically attached grilles are included and can be painted to match any décor. The SCL-5 is acoustically designed to match any of the JBL Synthesis Custom Loudspeakers (SCL series) as part of a complete JBL Synthesis immersive audio solution.
SCL-5 Highlights
-
2-way in-ceiling loudspeaker system designed for off-axis listening as height, in-ceiling LCR and surround channels
-
1-inch 2409H compression driver tweeter mated to a JBL patented offset High-Definition Imaging (HDI) horn assembly
-
7-inch (180mm) Advanced Aluminium Matrix cone, cast frame woofer with acoustic aperture waveguide baffle
-
Patented Cat Claw installation mechanism
-
Gold plated, spring-loaded binding posts
-
Includes paintable round and square zero-bezel, magnetically attached grilles
-
Compatible with CB10 pre-construction bracket
General Specifications
| Type | 2-Way In-ceiling loudspeaker |
|---|---|
| Low Frequency Driver | 7” (180 mm) advanced Aluminium Matrix cone cast-frame woofer (JW180PB-6) |
| High Frequency Driver | 1" (25 mm) 2409H Teonex annular ring-diaphragm compression driver |
| Recommended Amplifier Power | 25 – 125W RMS |
| Impedance | 6 Ohm |
| Loudspeaker Sensitivity | 86 dB/2.83V/1m (2pi anechoic) |
| Frequency Response | 48Hz - 32kHz (-6 dB on-axis), 2pi anechoic |
| Crossover Frequency | 1575 Hz |
| High Frequency Coverage Angle (-6 dB) | 60-degree Vertical (Up 30-degree, Down 30-degree, from 45-degree Vertical Centre line), 120-degree Horizontal, from 2k Hz to 10k Hz. |
| Enclosure Type | Open back |
| Controls | Boundary Proximity Control |
| Grille Dimensions | Round - 12.5" (318 mm) diam. |
| Grille Dimensions | Square - 12.5" (318 mm) x 12.5" (318 mm) |
| Product Dimensions (with grille) | 12.5" H x 12.5" W x 5.98" D (318 mm x 318 mm x 151.9 mm) |
| Cut-out Diameter | 11.2" (285 mm) |
| Accessory Rough-in Bracket | CB10 |
| Mounting Depth | 5.58" (141.8 mm) |
| Input Type | Gold-plated spring-loaded binding posts |
| Product Weight | 8.6 lb. (3.9 kg), 9.2 lb. (4.2 kg) with one grille |
| Shipping Weight | 12.5 lb. (5.7 kg) |
| Shipping Units of Measure | Each |
| Warranty | 5 Years |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy