Pay in installments of $287.50 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 5 - Aug 10
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Airmar Ss175c-20-mw 20d Tilt Medium Chirp Ultra Wide With Humminbird 21-pin MmcAirmar SS175MW Medium Ultra Wide 20 deg Tilted Element Thru Hull With MMC 21HB Humminbird 21 Pin Mix N Match Cable Model: SS175C 20 MW 21HB Fixed 20 tilted version for 16 to 24 hull deadrise Depth and fast response water temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60 100 kHz 57 to 73 beamwidth (port starboard) 16 average fore aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid
Airmar SS175MW Medium Ultra-Wide 20 deg Tilted Element™ Thru-Hull - With MMC-21HB Humminbird 21-Pin Mix-N-Match Cable
Model: SS175C-20-MW-21HB- Fixed 20° tilted version for 16° to 24° hull deadrise
- Depth and fast-response water-temperature sensor
- 1 kW with depth tracking down to 400 m (1,300#39;)
- Medium frequency: 60-100 kHz
- 57° to 73° beamwidth (port/starboard)
- 16° average fore/aft
- 40 kHz of total bandwidth from one transducer
- Medium frequency for superior mid-depth performance and excellent fish-target separation
- Low-profile, thru-hull housing yields good resolution at speed when installed properly
- Exclusive Xducer ID® technology
AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.
Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.
The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.
Specifications| Power Rating | 1 kW |
| Max Deadrise Angle | 24° |
| Housing | Stainless Steel |
| Functions | Depth, Temperature |
| Hull Material | All hull materials |
| Max Vessel LOA | Up to 11 m (36') |
| Hole Size | 95 mm (3-3/4"") |
| Mounting Style | Tilted Element Thru-Hull |
| Acoustic Window | Urethane |
| Cable-Length | 9 m (30') |
| Max Depth | 400 m (1300') |
| Medium Frequency | 60-100 kHz |
| Medium Frequency Beamwidth | 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) |
| Single or Dual Frequency | CHIRP-Ready Single-Band |
| Water Temperature | -10° to 40°C (14° to 104°F) |
| Weight | 2.7 kg (6 lb.) |
What's in the Box:
- SS175C-20-MW-MM Medium CHIRP 20° Tilted Element
- MMC-21HB Humminbird 21-Pin Mix-N-Match Cable
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 21 reviews
Sort
Product Reviews
★★★★★ 5
Awesome -- they work perfectly
Style: Updated 3.46in Magnet L Red Hooks 2PCS
Got these to store a DeWalt cordless drill and impact driver on the side of a Gladiator garage cabinet -- and they work perfectly for that. The magnet is incredibly strong, easily supporting the bare tools, and seems even to work perfectly well with an 8ah XR battery on the tool -- not that it's necessary since I don't store them like that. I like that the magnet is padded with rubber. Very nice units, I will get more for sure to store other items.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
★★★★★ 5
Incredibly strong magnets and thick, robust hooks. Excellent combination!
Style: Updated 3.46in Magnet L Red Hooks 2PCS
These magnetic hooks are really strong. Seriously! Each part is made to carry weight and last. The hooks are built out of thick steel stock. They bolt up to large magnets that grab onto steel surfaces and won't let go. The cabinets in my shop are all steel so these worked perfectly on the sides of the lower units. I have a few #12 AWG extension cords that are bulky and heavy. Truthfully, I didn't think these hooks would handle them. They do without any issue. Another application is a 30' long #10/4 AWG SO cable that powers my powder coating oven. It's usually unplugged and wrapped up. It would often end up on the floor where it was constantly in the way. The outside of the oven is all steel but I didn't want to make holes in it for cable hangers. Again, I didn't think that these magnetic hooks could possibly be strong enough to handle the weight of that cable but they do. And once they're attached, it takes a lot of effort to remove them! Amazing performance!!
I'm thrilled with these magnetic hooks. They are super strong and, obviously, simple to use. Importantly, they stay in place as they should. I wholeheartedly recommend these hooks to anyone. Great product!
Incredibly strong magnets and thick, robust hooks. Excellent combination!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 12, 2026
★★★★★ 5
Great for the storm shelter!
Style: Updated 3.46in Magnet L Red Hooks 2PCS, Style: Updated 3.46in Magnet L Red Hooks 2PCS
In our storm shelter we had some lights that we tried to hang up, multiple times, with no luck! Then I found these garage hooks. They are overkill for the lights, but I’m so happy that we now have lighting in the storm shelter. I could think of so many other uses for these. They strength of the magnets is awesome!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 19, 2026
★★★★★ 4
Magnet is super strong but hooks are not adjustable
Style: Updated 3.46in Magnet L Red Hooks 2PCS, Style: Updated 3.46in Magnet L Red Hooks 2PCS
I ordered this set of Mutuactor magnetic hooks because I was tired of thinking I had things organized and then finding previously hung magnets have slid down the wall.
It was a first for me to have to assemble a magnetic hook. This was made slightly more difficult by requiring a wrench. So many items these days arrive with a disposable little hex wrench or whatever is needed for assembly. Not in this case. Maybe the manufacturer assumes if you are spending $15 per magnet to hang your tools you have a wrench handy. Anyway, I got my wrench and found no instructions. I know from life that the order is bolt-washer-lock washer-nut. The next question arose when I found one bolt and several holes... hmmmm. It looks like they wanted to provide the option to screw the hooks directly to the wall. I am not sure the average person would pay that price just for a hook, though. I chose a hole and it seems to be the right one.
The good news is I was quickly in business. Soon one magnet was snatched by my husband for his rolling tool cart. He hung his (very heavy) Sawzall and the magnet never moved. He liked the rubber coating that protects his tools. I chose to take advantage of the amazing grip of this thing to hang my most used (and also very heavy) all-clad pan from the side of my fridge. The refrigerator had some sort of glossy powder coat and magnets hold well if you try to pull them straight off but end up sliding down anyway. This is where I came to appreciate the rubber shoe of this magnet. It protects my fridge but I think it plays an essential part in the grip strength of the magnet. I can not slide it around - I need to use two hands to pull it off then place it in another position.
To give a magnet strength example I had one magnetic hook on my desk as I was writing this review. My nearby desk-size scotch tape dispenser came sliding over and the magnet grabbed it. I was able to lift the tape dispense just by the magnet grabbing the little piece of metal serrated teeth that cut the tape. There is no other metal in my dispenser. That's it!
In summary, four stars because it REALLY grips and holds a lot of weight. Minus a star because I do think they are a little expensive, they required assembly without tools or instructions, and the hooks themselves are not adjustable. I have some similar magnetic hooks and you can move the two prongs apart or together depending on what your tool size is. These prongs are strong and firm and are not moving and this cuts down of the number of uses a little bit.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 12, 2026
★★★★★ 5
Develop some quality, worth-while hangups!
Style: Updated 3.46in Magnet L Red Hooks 2PCS, Style: Updated 3.46in Magnet L Red Hooks 2PCS
Organization is key for any shop space. This goes double for smaller shops. If you look around and DON'T see something that could benefit from getting off the floor and onto a peg or hook, I applaud you! For the rest of us, where can we get started? Here you go.
These hooks come two in a package. The quality of these are easy to see. The powder coating is very nice as powder coating is more durable than paint. The orange plastic coating on the hooks feels thick and durable. Assembly is easy. There's a threaded post sticking out of the black rubber coated magnet "puck" that you insert into a opening on the hook and secure with washers and a nut. I like that they included both a washer and locking washer. If it matters, I always stack the fastener in the following order: washer, locking washer, then nut. Using a 14mm socket, I was done in no time.
How's much will these hooks hold? The magnetic power on these hooks feels substantial. When I slowly approached the side of my metal toolbox, the magnet made an audible snap when it magnetized to the side. It felt strong! The bend at the base of the hook added stability pressing against the toolbox but didn't mark the surface since it was covered by plastic. It held my heavy 50a extension cable and the other hook held both my 25' and 50' pressure washer hoses. Neither moved at all and felt very secure.
Whether your shop is your garage or basement, making the most of your space makes a difference and these can help. These are very strong and hold items safely. I'm very happy having these around and will be getting more. If you have a metal surface that you can attach hooks, give these a try. It's a quality solution!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 21, 2026