SKU: 44424064629

Rear First Gen Dodge 4-8” lift 61-93 Truck/ Ramcharger SkyJacker Softride Leaf Spring

Sale price$155.70 Regular price$173.00
Save 10%

Pay in installments of $43.25 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 4 - Aug 9

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Rear First Gen Dodge 4-8” lift 61-93 Truck/ Ramcharger SkyJacker Softride Leaf SpringRear leaf pack for lifting your dodge truck. Made for 4 6 or 6 8 lift on all 72 93 dodge trucks from w150 through w350 including ramcharger. As you can imagine, the lift amount on a lighter duty truck will be greater than the amount on a heavy duty (originally higher) truck, therefore the advertised range in lift heights. So heres a little info to help you know how much lift you might get on your own truck and how tall of a block you might use with

   Rear leaf pack for lifting your dodge truck. Made for 4-6” or 6-8” lift on all 72-93 dodge trucks from w150 through w350 including ramcharger.
   As you can imagine, the lift amount on a lighter duty truck will be greater than the amount on a heavy duty (originally higher) truck, therefore the advertised range in lift heights. So here’s a little info to help you know how much lift you might get on your own truck and how tall of a block you might use with it. 
   The oem and aftermarket advertise “free arch” of a spring, because they are manufacturing the spring, but that’s not too helpful for us who are trying to lift or level a truck that’s at least loaded with the weight of an empty vehicle. So here’s the listed free arch of these two springs, and we will add the empty loaded arch as we get the numbers.

9.25” listed free arch for the 4-6” version,

——“ empty loaded archon most trucks,

11.0”  listed free arch for the 6-8” version,

—-“   empty loaded archon most trucks.

   This is if you draw a line or a string between each spring Eye Center and measure down to the top of the main leaf. These packs are both 4 leaves plus a helper plus a degree shim. So the pack thickness would need to be added in, that’s approximately 2-1/8”.

   Any additional height you need above this number will be made up with either a lift block or short leaf sections added to your leaf pack with a longer spring eye center pin bolt. Often these leaf packs (especially with a kit supplied block) move the axle forward as an attempt to save on driveshaft mods, at the expense of appearance (don’t we mess with suspension so it performs and looks cool?). So our offset plate will let you move things back to where they should be if you are within an inch. 
  Keep in mind that a lift block of reasonable height is not only acceptable in the rear, but when used in conjunction with a traction bar it creates a very stable and strong arrangement. We always recommend an upgrade in u-bolts to 5/8, and also like to flip the u-bolts around so the threads are up and round end down for better function and appearance. We have this available in our 1g Traction Bar Kit. 
   Also keep in mind that the leaf can only ride so good empty and also hold up a heavy load without major sag. So a soft ride empty, and a loaded ride still leveled, are a compromise. With the above recommendation of a block and traction bar, the option is now open to remove hd weight carrying leaves from the pack (reducing their empty loaded height, and increasing the need for a taller lift block) and then supplementing the now softened leaf with a helper air bag. This is the way air helper bags can be used as an actual advantage. We have a kit to add an air helper to your truck. It will probably require slight modifications on your lifted truck that will be unique to you in its exact requirements.

Softride springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride springs use bolt style spring clips, eliminating friction. Other spring designs use the cinch style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker Softride springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 44424064629

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 18 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
RVGregoryZ
Lexington, US
★★★★★ 5
My experience with the Anker Products is Great.
Style: 7 in 1 【1 HDMI】
Anker USB C Hub (7-in-1) I now have several Anker Products in my home. These folks just know how to build products. Affordable and durable, stable and easy to use. This 7 in 1 is all Plug and Play. I am using an external power supply, and this product delivers it to all of my connected devices. The stability of every thing plugged into the USB Ports keeps everything connected just as it should. I recommend the Anker Product Line and this product in particular. SO, if you're in need of additional USB Ports, go with Anker.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 2, 2026
B
Verified Purchase
Bimmer369
Phoenix, US
★★★★★ 5
Solid; long lasting
I use this adaptor to hard wire an ethernet internet connection straight into a Samsung Galaxy S10+ with PD (charges phone while connected). I also use an S8+ which works, too. This is a great option for those of us who understand the dangers of being exposed to low-powered microwaves all day and night (AKA Wi-Fi). While hard wired to ethernet, you can enjoy the internet with airplane mode on, which is a big plus! I've used several different branded adaptors (the ones without PD kill your device's battery QUICKLY) for this purpose, and this Anker outshines them all. Most other brands (I've tried Belkin, Ugreen, and some other somewhat obscure brands) work fine for a short time and then begin to get spotty, losing and regaining connection intermittently until crashing and not working at all over a short period of time, usually not longer than 3 to 4 months if you're real lucky. However, I've had this Anker for nearly a year (10 months and change), and it's still going strong. Now, it's not perfect. It does lose connection from time to time and then regain connection just like the others, but nowhere near as frequent, and if you are mindful of the orientation of the cords and take care not to twist or put torque on them once they're connected to a device, it usually keeps connection very nicely. Be sure to put the device in the proper orientation through which you'll be looking at it, and THEN connect the adaptor (don't connect the adaptor and then have to roll the phone over to look at the screen, as this is the fastest way to kill the adaptor and loosen your phone's charging port). When first attaching, I plug the ethernet cable into the adaptor and use a hair-tie rubber band to wrap around the end of the ethernet cable, making sure it's tight with no slack, then I secure it around the BASE of the type-C cable coming out of the opposite end of the adaptor (see attached picture). Then LEAVE IT. If you incessantly disconnect and reconnect this adaptor, I guarantee it will not last as long. As for the features of this adaptor, I can only speak on the ethernet connection, the PD port, and the type-C 5gbps port. The PD port is nice because if you try connecting to the internet and doing pretty much anything without it, your device's battery is going to drain quite rapidly. How fast depends on how good your device's battery is to begin with. S10+ probably won't last half the time without PD as it does with PD. Just realize that your device is not going to gain power while charging through the PD port, but rather the battery will merely die at a slower pace, giving you more time before having to recharge your device. The other factor is how long your charging cable is (the shorter it is, the longer the battery will last). Tip: While using PD port, your device will not warn you of your battery about to die since it is technically charging, so if you're doing something important, you had better keep an eye on your battery percentage, lest it dies unexpectedly. I've not used the hdmi port at all, so nothing to speak on there. The 5gbps type-c port is nice if you want to connect an external hard drive while either A: connected to the internet, B: still being able to charge your phone, or both! I use the Samsung Portable SSD T7, and the Anker is great for saving large videos/files straight from the internet onto the external hard drive. The Anker is also good for freeing up space on your phone by moving existing files to the hard drive while continuing to charge your phone (otherwise, the hard drive connects directly to your phone, so your charging port is being used, and if your battery is low, no charging). Also, if you disconnected the ethernet cable from the Anker while moving files to an external drive, I suspect that the PD port would actually add battery percentage instead of merely slowing down the loss of battery percentage. To summarize: - Don't get Wi-fried: use a hard-wired ethernet connection instead! - Great adaptor that lasts longer than all others I've tried. - PD is a must have feature, but your device will still eventually die. - Great for saving videos/large files straight from internet to external hard drive while being able to charge device simultaneously. This Anker is the one you're looking for! Cheers.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 15, 2022
A
Verified Purchase
Amiga95
Phoenix, US
★★★★★ 5
Excellent quality with just the right amount and type of connection points I needed!
Extremely good quality. I've used many Anker product over the years and this one didn't disappoint! Needed it to run a laptop on my network in isolation mode and to have accessible connections for ethernet as well as a wireless mouse and extra cooling fan as my laptop has only 1 standard size USB 3.0 port. This is the mini version so It won't necessarily supply enough juice to charge your laptop at the same time (there's another 8 in 1 made by Anker for that) but it can supply enough power to maybe get you through a very trying session, very short term. Super-easy to connect and just works. Fits comfortably in my carry bag too. Very light weight, good heat dissipation although I didn't really have any or at least not much. Compatible with all the connectors you see in the picture. In my case at least, it wasn't a luxury it was a necessity and it proved it's value immediately.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2026
L
Verified Purchase
Lars Bogard
Houston, US
★★★★★ 5
USB ports charge.
Relatively cheap, lightweight, and better than most. It gets warm, but not hot. The Video adapter was immediately recognized by my Macbook and works flawlessly at all resolutions made available (much higher than Windows PCs) I used it both as the recipient of my 65W Mac charger, and the Mac received its power from this device; I also had the 65W Mac charger plugged directly into the Mac, and this plugged into the second USB-C plug on the mac. It works (HDMI monitor) both ways. It says that the ports are not for "charging", however be aware that they do charge when devices are connected, for example my iPhone to the extra USB-C port, or the USB-A port. My Logi back-lighted keyboard lights up too. I don't know why they say it is not for charging. Perhaps it is simply saying there are no ports expressly intended to do charging without connecting to your computer.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 18, 2026
J
Verified Purchase
J. Stewart
Whiting, US
★★★★★ 5
High quality and all the right connection types
This works great. I've used it for both my MAC and PC. I really love the Ethernet on the end and the HDMI connections (which modern laptops don't include at times). This is a great adaptor and highly recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026

recommand products