APEX EC-7 | 18" x 9.5" ET22 | 5x120mm | 72.56mmAPEX Race Parts designs and manufactures high performance, flow formed and forged wheels for a growing list of vehicle makes. They are constantly expanding their product line with new wheel designs, wheel accessories and other performance and race parts. It is their mission to produce and distribute high quality performance parts that meet the demands of racing and street performance enthusiasts. FOR WHEEL FITMENT GUIDE https: apexwheels. com fitment
APEX Race Parts designs and manufactures high performance, flow-formed and forged wheels for a growing list of vehicle makes. They are constantly expanding their product line with new wheel designs, wheel accessories and other performance and race parts. It is their mission to produce and distribute high-quality performance parts that meet the demands of racing and street performance enthusiasts.
ModelEC-7 Wheel QuantitySold Individually Wheel Diameter18" Wheel Width9.5" OffsetET22 Bolt Pattern5x120mm Centre Bore72.56mm Load Rating1,550lbs Weight21.75lbs (9.86kg) Face ProfileProfile 3; deep concavity Wheel ConstructionFlow Formed
A FITMENT FOR YOU
Need help selecting the proper wheel fitment for your BMW? APEX Race Parts have tirelessly test-fitted hundreds of setup combinations in order to provide direct-fit, spacer-free wheel packages for everything from showroom-fresh cars to all-out race builds. Their detailed fitment guides help you avoid costly trial-and-error and walk you through every step of finding your perfect setup.
Fit Matters
Fit Matters The right solution for every application
An optimized car setup begins with the perfect wheel and tyre fitment. Without model-specific attention to each wheels specifications, maximum performance is compromised. Each size was selected to find the right balance between a clean fit and the most grip possible. The EC-7’s wide range of widths, diameters, offsets and face profiles result in unique fitments ranging from 8.5" to 10.5" wide. Each wheel combines these features to meet the different brake caliper, strut, and fender clearance needs of each BMW model. Most vehicle models have options for wheels that range from direct-fit to aggressive for specialty applications.
Face Profile One design, many levels of beauty
The EC-7 wheel is available in three increasingly-concave face profiles; The shallowest face provides increased caliper clearance on narrow applications, while the deepest concave face reduces weight and creates a stunningly aggressive appearance on low offset and wide-width applications.
Spokes More than just a pretty face
The curved spokes of the EC-7 serve many purposes, both in terms of form and function. The split "Y" spokes were carefully evaluated from every aspect to ensure light weight and remarkable strength. Their curved design increases brake calipers in almost every application, allowing the EC-7 to fit where the ARC-8 design simply cannot. The unique curvature of each face profile reduces centre pad material as they are optimally selected for each unique width and offset. The lack of a deep front lip and spokes that connect directly to the barrel's lip, producing a rigid wheel with even load distribution.
Brake Clearance A lot of room in a tight space
Spoke clearance is only half the problem. The barrel construction on a wheel also needs to be big enough to clear the sides of your caliper and rotor. Many aftermarket wheels that have aesthetic compromises in their design may work with smaller stock brakes, or smaller diameter big brake kits, but the larger kits will pose a major problem. The barrel of the EC-7 wheel offers unmatched caliper clearance because wheels shouldn’t limit your choice of aftermarket brake kits, and brake kits shouldn’t force you to run oversized wheels. APEX 2D modelled most Big Brake Kits available in Solidworks and tweaked the wheel design of the EC-7 prior to production in order to fit as many kits as possible.
Hub Centre Easy to access lugs
Race wheels can't just be light, they need to function in a high performance environment. Unlike the narrow lug recesses of most other wheels, the EC-7 wheel features a wide open hub centre that easily accommodates oversized race lugs and beefy impact sockets. This allows for quick and easy wheel changes and prevents chips and scratches from tools.
Hub Centric No rings or adapters here
All APEX EC-7 wheels are purpose built for select vehicle applications, and hub locating rings are never required for any BMW application. All 5x120mm bolt pattern wheels feature a direct-fit, 72.56mm centre bore.
Centre Cap A factory fit and finish
APEX don't reuse one cap design for all of their wheels. Every EC-7 wheel is designed to work with factory centre caps. You can easily replace APEX centre caps with OEM roundels for a clean factory look. The EC-7 wheels will ship with the APEX Gloss Black centre cap that mimics the size and shape of a BMW factory centre cap.
Wheel Hardware Original or Aftermarket, it all works
The EC-7 wheel can be used with all OEM and aftermarket mounting hardware with a 60° tapered seat. Lug bolts, wheel locks, and stud conversion kits all work perfectly. The EC-7 wheel also accepts wheel spacers without issue. The shallow rear chamfer allows the wheel to remain hub centric even when 5mm flat spacers are used. The chamfer is deep enough to clear the chamfered lip found on some aftermarket spacers that would typically cause improper seating of the wheel and, therefore, wheel vibration.
TPMS Sensors They all fit
TPMS sensors, which monitor tyre pressure, are one piece of technology that can't be compromised. The attention to OEM compatibility on the EC-7 wheel doesn't end with centre caps. All APEX wheels accept OEM and aftermarket equivalent TPMS sensors, and any standard sized metal or rubber valve stem.
THE APEX STANDARD
Flow Forming Benefits of forging, without the pain
These APEX wheels are produced using a manufacturing process known as flow forming. This process significantly reduces weight in the barrel, which has the greatest impact on rotational mass. During the manufacturing process, rollers apply high pressure to the inner barrel, compressing the aluminium into its final shape. This effectively eliminates porosity and aligns the grain structure of the metal, which increases tensile strength. The end result is a lightweight and extremely strong barrel that equals that of a traditional forged wheel at a fraction of the cost.
Testing & Certifications Verifiable 3rd party testing
Many companies promote their wheels as being certified by the VIA when they actually aren’t. That’s like using the USDA logo on food without permission. APEX wheels get officially tested and registered by the VIA in Japan, and they have the proof to back it up.
Japan’s JWL is a commonly followed standard for wheel load ratings. The APEX flow formed wheels meet, and most exceed, their load rating requirements. Most manufacturers only meet the minimum while some don’t even do that. Check and verify load ratings before you buy.
Weight & Strength Optimization It’s all in the details
Various design features were implemented to ensure that the EC-7 wheel design was light, but had even more strength to handle the abuses experienced in endurance racing. APEX began with a beefy, multi-spoke, one-piece design. They then added reliefs in the mounting pad to remove weight between lug holes, where they could safely save weight. The design was then run through Finite Element Analysis (FEA) to further optimize the spoke and barrel design. The result is a lightweight wheel with extra strength in all the right places. Use the EC-7 with confidence. It’s over built for both street and track.
Finishes Because being faster is just not enough
The EC-7 wheel is available in multiple finishes. All APEX wheels are finished using a comprehensive multi-stage liquid paint system over a powder coated base coat. Standard finishes include gloss-metallic finishes, and semi-gloss or matte finishes.
Often overlooked, painted or powder coated lug hole seats can cause hardware to loosen or begin the spread of paint chipping to more visible sections. The coating process of the EC-7 leaves lug holes, centre bores and mounting pads untouched, which ensures proper fit and torque values.
Lifetime Warranty A wheel you can depend on
As of recent, all APEX wheels now come with a lifetime structural warranty and 1 year finish warranty, so you can be confident in your purchase. Please contact us for the full terms and conditions.
Models
1 Series / E82 / E88 (2007-2013) / 1 Series M (1M)
Solid design, long lasting, healthy surface for cooking
Size: 11-Piece Set
I bought this exact set in 2021. I am buying more. With the number of reports about the dangers of pans made with non stick coating I decided i would only use cast iron or stainless steel going forward. These are “amazon brand” but I can say after years of use and abuse they are standing the test of time. Multiple moves, toddlers, rough use and they are all fully functional and work great. I LOVE the teardrop handles. It makes it so easy to hold the handle and the hanging holes on the handles are large allowing you to hang it more places on more things you may already have set up in your kitchen. I think anyone who is looking to get away from cheap, chemically pans off the rack should look at this set!! I have 4 years of proof they are not junk but a great long lasting items that seem to be well made. Higher price than buying a $10 pan at walmart but you get so many pots and pans with lids that will last a lifetime. You can also use stainless steel to cook in the oven so more functionality than most pans and pots you buy of the rack. You will just need to learn how to cook with stainless steel pans (check YouTube lots of instruction there).
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 27, 2025
C
Verified Purchase
Claire53
Dallas, US
★★★★★ 4
Very pretty cookware
Size: 11-Piece Set
This is nice quality cookware for a great price. I have seen cooking shows that tell how to cook in stainless steel without it sticking. Unfortunately, my food still sticks. If I use a lot of oil, it isn’t so bad. One cooking show host says if you get it real hot before you add the oil, it won’t stick. It sticks. I am trying to get away from using Teflon because they say we have a lot of Teflon in our bodies from our cookware. I still go back to my Teflon a lot. But the cookware is very pretty, a nice weight, and cleans up fairly easily. I do soak the skillet before I clean it. I don’t have to do a lot of scrubbing. The sauce pans are great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 10, 2025
B
Verified Purchase
BookCase
Waukegan, US
★★★★★ 5
Cooks well, cleans easily
Size: 15-Piece Set
Bought this to replace old nonstick cookware. Looks good and not too heavy. Pot handles are cool enough to hold near the ends but tend to warm up close to the pot itself. Using on a gas range – heat spreads quickly and cooks. Best on low heat. Some sticking problems with food like cereal, lower heat advised. Glass lids are very handy with steam outlet. Have not used all of them yet, but they store and stack easily and I was looking for a good size stock pot and this should suffice. Not as heavy as other stainless steel cookware. Price reasonable for the number of pieces included.So far I am very pleased with this purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 15, 2026
H
Verified Purchase
Heather D.
Lowell, US
★★★★★ 5
Heat up well before use for "non-stick".
Size: 11-Piece Set
I really l Iike these stainless steel pots. I had to learn the trick to using them, and that is to make sure they are heated up properly before using. This makes them "non-stick" and your food won't stick to the bottom of the pot, especially if you're frying it. Also follow the manufacturers instructions and "season" the pots after you receive them, by coating the insides with oil and heat them up.
They cook really well, are light weight, easy to use, easy to clean, very sturdy, shiny surface, and holds heat after you've finished cooking. Also, don't use harsh scrubbers in them because it will scratch the surface. Scotch Brite Scour Pads work well in these pots. If you scratch them, use the green Scotch Brite Scour Pads to polish the scratch marks out. Enjoy them!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2026
S
Verified Purchase
Sophia
Boise, US
★★★★★ 5
EXCELLENT DEAL.
Size: 5-Piece Set
These are authentic food grade, stainless steel pots and pans sold for ten times more via other companies. I did the research and the part where we cook or boil is stainless steel. The core is aluminum (we don't get that when we eat) and the outside is stainless steel again. Beware, though, they are SUPER HEAVY. Lift weights before picking them up! We love them. Wish we'd bought them sooner. You can't cook on high with them, though, b/c it will burn the food, since it isn't nonstick. We've learned to cook low and slow. No need to scrub so much. That's the only drawback. Great quality!
Promo Codes Available: