Pay in installments of $4.72 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 8 - Aug 13
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
CJX2-1210 3 Pole Contactor 25 Amp 220 VAC Coil - Fits Relays, Air Conditioner, Heat PumpCJX2 1210 3 Pole Contactor 25 Amp 220 VAC Coil Key Features High Conductivity Silver Alloy Contacts: Engineered with premium silver cadmium oxide contact points that provide superior electrical conductivity and arc resistance, ensuring a long service life even under high frequency switching. Flame Retardant Industrial Housing: Encased in a high strength, heat stabilized thermoset plastic that resists tracking and melting, providing a safe electrical
CJX2-1210 3 Pole Contactor 25 Amp 220 VAC Coil
Key Features
- High-Conductivity Silver Alloy Contacts: Engineered with premium silver-cadmium oxide contact points that provide superior electrical conductivity and arc resistance, ensuring a long service life even under high-frequency switching.
- Flame-Retardant Industrial Housing: Encased in a high-strength, heat-stabilized thermoset plastic that resists tracking and melting, providing a safe electrical barrier for high-voltage industrial and HVAC applications.
- Precision 220V Electromagnetic Coil: Features a high-quality copper-wound induction coil designed for stable pull-in and release voltages, reducing the "chatter" and humming often found in lower-quality contactors.
- Integrated 1NO Auxiliary Contact: Equipped with one built-in "Normally Open" (10) auxiliary terminal, allowing for the easy integration of indicator lights, interlocking circuits, or feedback signals to a control board.
- Universal DIN Rail & Screw Mounting: Designed for maximum installation flexibility, featuring a standard 35mm DIN rail snap-fit base as well as traditional screw-hole mounting for panel-backplate installation.
Replaces / Cross-Reference Part Numbers
- CJX2-1210
- LC1-D1210
- Schneider: LC1D1210M7
- Chint: NC1-1210
- ABB: AF12-30-10
Compatibility & Fitment
This 3-pole contactor is a universal heavy-duty switch used for controlling motors, heating elements, and lighting loads. Common applications include:
- HVAC Systems: Acts as the primary power switch for air conditioner compressors and heat pump outdoor units.
- Industrial Motor Control: Suitable for three-phase motors up to 5.5kW (at 380/400V) or single-phase motors in pumps, fans, and conveyors.
- Heating Equipment: Used to switch high-amperage resistive heating elements in industrial ovens and water heaters.
- Lighting Arrays: Capable of managing large banks of commercial high-intensity discharge (HID) or LED lighting.
- Note: Ensure your control circuit provides 220V/230V AC to the coil (Terminals A1 and A2). This unit will not operate on 24V or 120V control circuits.
When to Replace
- Loud Buzzing or Humming: Indicates debris inside the magnetic core or a failing shaded pole, which can lead to overheating and coil burnout.
- "Chattering" Contacts: The contactor opens and closes rapidly when energized, often caused by a weakened internal spring or a failing electromagnetic coil.
- Visible Carbon Buildup: "Pitting" or black charring on the contact points suggests the silver coating has worn away, causing high resistance and potential fire hazards.
- Burnt Smell: An acrid, metallic odor coming from the contactor usually indicates the internal coil has melted or the plastic housing is overheating.
- Circuit Won't Close: The coil receives power (A1/A2), but the plunger does not pull in, indicating a break in the coil winding.
Installation Tips
- Safety First: You MUST disconnect the main power supply. Contactors manage high-voltage and high-current circuits that can cause severe injury or equipment damage.
- Coil Wiring (A1/A2): Connect your 220V control wires to the A1 and A2 terminals. It does not matter which wire goes to which A-terminal as it is a non-polarized AC coil.
- Line vs. Load: Connect your incoming power to the top terminals (L1, L2, L3) and your motor or device wires to the bottom terminals (T1, T2, T3).
- Check Terminal Torque: Ensure all screw terminals are tightened firmly. Loose connections are the #1 cause of contactor failure and "arcing" heat damage.
- Auxiliary Use: If your system uses a "Run" light or a status sensor, connect those low-current wires to the NO (13/14) terminals on the right side of the unit.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 28 reviews
Sort
Product Reviews
★★★★★ 5
Excellent product for the price.
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
I have had many, many printers over the many years at the business and for home. I honestly think this is the best value for what I need. The eco tank is fabulous. This is the first printer I have purchased with the ecotank. So much better than the cartridges. The quality is good and it was easy to setup and put on the network. I did wait a few months before writing this review to truly test it out and write a fair review. I am pleased. I have had Epson products in the past and do appreciate their quality and affordability.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 4, 2026
★★★★★ 1
JUNK, Cheaply built, Feed Scanner fails and falls apart in less than 5 months and only 4 uses.
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
Absolute piece of Junk!
Built cheaply.
Feed Scanner has never worked properly from my first scan (only did 4) and now falls apart completely, in the roller section. It falls out after it jammed for the 7th time today, this time with a SINGLE piece of paper.
If you have a piece of paper that has a fold in it, forget about it. That will never feed through.
I had 6 sheets I had to get out today, I had to do manually via the flat bed, both sides.
It took 23 minutes to get done. Should not have taken 2.
The last time I used it same issues but less sheets.
The paper is SO TIGHT in the feed section it is hitting BOTH walls.
You could not slip a piece of paper in there if you wanted too, most likely one of the reasons it does not feed correctly.
While on the phone with support (I am right now, 4th call today and 3 emails of pictures they wanted later, the hoops they put you through is ridiculous!)
Of course overseas support and has little to no knowledge of being Tech support, I asked for supervisors only to have my first call disconnect at 1 hour and 20 seconds.
Then the next call was 24 minutes, then another 32 minutes and now this one still ongoing (56 minutes and still going).
Now after 3 hours and 5 minutes, they are "holding" my credit card for 179.99 + tax to get a REFURB unit!
So much for a 5 year Warranty.
Oh they acted like it was out of date on Warranty, it has NOT been in EXISTENCE for 5 years , it came out in 2022.
Did I fail to mention you WILL be dealing with Overseas people who have you repeat the same thing over and over and over and over again. They wonder why I was getting upset...hmmmm .
As they pass you along the ranks you have to repeat EVERYTHING all over again.
As I was on the phone and they were asking me to open WRONG doors to find the serial #, I lifted once again the Jam area and guess what, the parts fell out.
Just PLOP!
Other issues while I am at it, the Picture quality is "OK" nothing special.
I bought it to save ink as HP gouges you to death and destroys your print head if you use a knockoff.
The Ink has been "OK", but I haven't really had it long enough to tell as most everything has been Black and White, so all are still full except the Black (3.4's).
Its a rear feed, I miss the HP draw on that, the print speed again is not fast, just OK. Though never really in a rush with it.
I cant say it enough, this is cheaply built, and my experience with Tech Support was a HORRIFIC.
I never like dealing with Over seas support as it is, but what they wanted pictures of as proof was mind blowing (pictures of the tubes that go to the ink wells? What does that have to do with the issue at hand.)
The panel function is anything but user friendly.
Firmware Updates, if not done, will prevent usage until done.
You have to download and install ALMOST 30 different files, from drivers to firmware updates the list is endless. Never have I had to do that many of ALL printers I have had combined.
Simple ZIP file and let it run on an executable file (EXE)like everyone else. That will take you over 2 hours to get all loaded.
The ink wasn't bad seeing it needs to be primed first to work, I am not sure what will happen when the REFURB comes, will I get ink or just have to re-prime from the cartridges.
The software for scanning is easy to use, though unnecessary, should just scan and auto save, or am I just spoiled by HP?
But to send me a "REFURB" as a replacement on a 5 month old unit with a 5 year warranty is really being low.
They did EVERYTHING they could to get me to NOT follow through in this return, you have ONLY 30 days on Amazon.
You have been warned, I would look elsewhere, the tank issue is a great Idea, but if it doesn't work, what good does it do.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 8, 2025
★★★★★ 5
First Impressions - Complete Review
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
Printer Review from an Artist.
Printer cost with a 3-year extended warranty - $199.00. Came with four full bottles of Ink. Each bottle was huge, and enough to completely fill up the tanks. In my old Epson printer that used Epson 127 Ink Cartridges a cartridge held 8ml of ink. The cost per cartridge for the XL Black was $31.00 on Amazon. In comparison, a bottle of ink for the tank printer costs $15.00 and holds 65ml. The Epson 127 Ink Cartridge is rated at 175 pages for the XL cartridge and the Tank Printer is rated at 4500 pages per bottle of ink. So, the difference in cost is striking.
Unboxing the printer was simple enough. The printer weighs about half the weight of my old Epson printer. The new printer does not have printer drawers but, back feed only. This actually worked out well for me since I was constantly taking the paper in out and out of the drawers when changing paper size. Also, with this direct paper feed, I figure it will handle my heavier weight card stock paper that I use for my art and greeting cards. To my great surprise, the printer offers two-sided printing. This is really handy when printing my Zines. The printer setup was extremely easy as they recommend a phone app, that walks you through each step with pictures. And it communicated perfectly with the phone for the setup. It takes about 15 minutes to completely set up the printer. I have learned to not rush setup. Take your time, and follow the instructions step by step, Which include filling the tanks.
Features,
* The printer dues Dual-Sided Print - Great for zines.
* It has fax capability, but we do not have a landline, so that will not be used.
* It does copying, with a document feeder or you can lift the feeder and place the document on the glass.
* I mostly use my Epson Precision San copier but it is nice if you wish to make a quick copy of a document.
* Some reviews complained about the very small LED display but I find that by using the app or computer I can control all that I need to do.
Print Alignment. I did this test but the printer heads did not require any alignment.
During the setup process, the program installs the printer driver on my computer. However I found it to be the very basic driver, and I went to the Epson Website and downloaded and installed the latest driver which is very robust and has all the settings that I needed.
The printer's footprint is smaller than my old printer. And my old printer had two paper drawers, though I never used the second drawer.
Negatives.
The output tray is flimsy and seems like it would easily break if bumped when I walked past the printer, so I have to be careful about this.
So far I do not see a way of checking the ink levels from the computer. And they said in the instructions to be sure to check your ink levels. You can see on the front of the printer, where you can see the ink levels. When you purchase more ink, you can attach the bottle and it will not overfill the tanks, and you can then use more ink from the bottle later. So I will purchase a complete set of ink and keep it and as it runs low with about 1/4 left in the tank, I will just fill it up.
So far I am very happy with the investment and now printing and ink cost is not a major factor. And I figure I will do a lot of printing with this printer when the holiday season rolls around for my greeting cards.
As for print quality, I will need to report on this later, though there were no negative reviews of print quality. A test print on regular paper and the colors seemed to be spot on.
One note, I still will continue to use my Canon Pro-300 Wide Printer for my Fine Art Prints, but the new Tank Printer will be my studio workhorse.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 11, 2024
★★★★★ 4
Frustrating to set up and unreliable
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
I bought the Epson EcoTank ET-4800 hoping for an easy, low-cost printing solution, but it has been nothing but trouble. The wireless setup is overly complicated, and the printer often loses connection to the network, forcing me to restart it or reinstall the software. Printing is slow, even for simple documents, and the paper feeder sometimes pulls multiple sheets at once. While the EcoTank system is supposed to save money on ink, the print quality is inconsistent — colors can be dull, and black text occasionally appears streaky. Scanning and copying are also sluggish. For the price, I expected something much more reliable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2025
★★★★★ 5
ET-4800 EZ PZ set up and start up. Prints and scans just fine
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
An excellent home printer. And why did I purchase such?
I had an Epson WF-520 for nearly ten years. But neglect and lack of use caused the printer head to get gunked up. I cleaned the print heads using a solution of 95% Etoh and glass cleaner (about fifty/fifty), a syringe with a plastic tube attached and LOTS of paper towel strips. It was moderately successful but I was never able to get it back to like new printing.
I looked over several new printers and wanted to stay with Epson because of ease of use (copy, scanning, printing). Seems as tank printers are the way to go these days. So I ordered the ET-4800. Got here in only a couple of days. Setup was pretty easy, just follow the instructions either via the documentation included or online version. I have pinted and scanned a color test page. I used the built in SmartScan feature without having to think about it much. I am quite satisfied with the results.
By the way, there is no automatic two side printing. You actually have to get off your b---, take out the first printing, turn it over and refeed the stack. I was used to doing that with the old WF-520 and never had a problem.
I will now set up a once a week, automatic scheduled printing task. I will just have to make sure there is paper on hand. Lack of use is the killer of these inkjet machines regardless of manufacturer.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 16, 2026