Pay in installments of $995.00 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 4 - Aug 9
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
2020-2025 GM HD 6.5" FOX 2.0 Performance Conversion Kit (BDS753FPE)This BDS 6. 5" suspension lift kit transforms your 2020 2025 Chevy Silverado and GMC Sierra 2500 HD with a FOX 2. 5 coil over conversion and clearance for up to 38" tires. It replaces the factory torsion bars and upgrades both upper and lower control arms, the uppers fabricated from 1. 5" OD x . 120 wall TIG welded tubing and the lowers built from fully boxed, internally gusseted high strength steel. BDS's high clearance design pairs 1 4" steel
This BDS 6.5" suspension lift kit transforms your 2020-2025 Chevy Silverado and GMC Sierra 2500 HD with a FOX 2.5 coil-over conversion and clearance for up to 38" tires. It replaces the factory torsion bars and upgrades both upper and lower control arms, the uppers fabricated from 1.5" OD x .120-wall TIG-welded tubing and the lowers built from fully boxed, internally gusseted high-strength steel. BDS's high-clearance design pairs 1/4" steel crossmembers, multipiece differential relocation brackets, and heavy duty skid plates with CNC-machined ductile iron steering knuckles to correct steering geometry at ride height.
FOX 2.5 Performance Elite coil-overs come tuned and ready to bolt on, with a remote reservoir for added cooling and Dual Speed Compression Adjust offering 10 low-speed and 12 high-speed settings. The rear uses replacement lift blocks, a u-bolt flip kit for max clearance, and FOX 2.0 Performance shocks.
Features
- FOX 2.5 coil-overs offer improved damper performance over stock
- Dual Speed Compression Adjust adjuster allows easy high-speed and low-speed compression tuning
- Performance UCAs increase strength and allow for more suspension travel
- High Clearance design w/ no torsion bar drop maximizes ground clearance
- Robust steering knuckles maintain ESC system compliance
- HD skid plate system for improved offroad protection
- Multipoint differential relocation brackets to secure the front axle and improve CV angles
- Factory Protection Plus drivetrain warranty included
Specs
- Front Lift Method: Coil-Over
- Rear Lift Method: Block
- Shocks Included: Yes
- Front Lift Height: 6.5 Inch
- Rear Lift Height: 5 Inch
Notes
- Compatible with diesel models ONLY. Works with standard or AT4 diesel models.
- Will NOT work with AT4X or ZR2 models, lower control arm profile is different.
- For DRW models, use the w/ overload rear lift option.
- Requires frame bracket modification.
- Models with two-piece rear drive shafts will require a carrier bearing drop kit (BDS121612).
- Disassembly/assembly of the factory torsion bar system requires a special unloading tool. The GM specified tool # is CH48809.
- Coilover coil has a large amount of preload; a coil spring compressor must be used to remove the coil from the coilover. Failure to use a coil spring compressor may result in death or injury.
- Do not increase coilover preload.
- Factory 17-18" wheels cannot be reinstalled due to tie rod end interference; stock 20" wheels can be reinstalled with up to a 37x12.50 tire.
- Some minor trimming will be required with certain wheel/tire combinations, normally the bottom edge of the inner fender shrouds and/or lower corner of front bumper valance. Deeper backspacing and shorter/narrower tires will reduce or eliminate trimming.
- Vehicles used in 4WD on the highway regularly could experience a minor front driveline vibration; if this occurs we recommend replacing the front driveshaft with a dual Cardan style driveshaft.
Includes
- BDS011516, 2020-2024 Chevrolet Silverado/GMC Sierra 2500/3500 HD 6.5 Inch Rear Box Kit w/o Overloads (UPC 658848611911)
- BDS021303, 2020-2024 GM HD LCA Kit - Drv (UPC 711745611894)
- BDS021304, 2020-2024 GM HD LCA Kit - Pass (UPC 711745611900)
- BDS021690, 2020-2024 Chevrolet Silverado/GMC Sierra 2500/3500 HD 5 Inch-6.5 Inch Knuckle Box Kit - Drv (UPC 658848615179)
- BDS021691, 2020-2024 Chevrolet Silverado/GMC Sierra 2500/3500 HD 5 Inch-6.5 Inch Knuckle Box Kit - Pass (UPC 658848615186)
- BDS021692, 2020-2024 Chevrolet Silverado/GMC Sierra 2500/3500 HD 5 Inch-6.5 Inch Front Box Kit 1of2 (UPC 658848615193)
- BDS021693, 2020-2024 Chevrolet Silverado/GMC Sierra 2500/3500 HD 5 Inch-6.5 Inch Front Box Kit 2of2 (UPC 658848615209)
- BDS121301, 2020-2024 GM HD Coil Over Conversion UCA Kit (UPC 711745612051)
- BDS121661, 2020-2024 Chevrolet Silverado/GMC Sierra 2500/3500 HD 5 Inch-6.5 Inch Skid Plate Box Kit (UPC 658848619276)
- BDS121663, 2020-2024 GM HD Coil Over Conversion Kit - 6.5 Inch (UPC 711745612099)
- FOX88406339, Kit: 20+ GM 2500/3500 HD Front Coilover, 2.5 Series, R/R 6.5 Inch Lift, Dual Speed Compression Adjust
- FOX98224767, Fox 2.0 Shock 31.02 x 18.95 x 2- EB1/EB1
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy