Connecting Rods Integrated Engineering Forged 144X20 Rods 1.8T | FSI | Stroker | 16V | early 8V Audi VW

Connecting Rods Integrated Engineering Forged 144X20 Rods 1.8T | FSI | Stroker | 16V | early 8V Audi VWWhen increasing the power output of an engine, internal parts begin to fail as they are pushed far beyond their limits. Integrated Engineering Forged Connecting Rods are designed to replace the factory units and take the beating from power adding modifications. Connecting rods are some of the highest stressed components in an engine and thus require extreme attention to detail to ensure proper operation and reliability. Integrated Engineering ensures

When increasing the power output of an engine, internal parts begin to fail as they are pushed far beyond their limits. Integrated Engineering Forged Connecting Rods are designed to replace the factory units and take the beating from power-adding modifications.

Connecting rods are some of the highest stressed components in an engine and thus require extreme attention to detail to ensure proper operation and reliability. Integrated Engineering ensures the success of your next engine build by putting each set of connecting rods though a rigorous quality control process. For years Integrated Engineering H-beam Rods have been an integral part of delivering the power that the highest powered turbo setups and race engines demand.

Extra attention has been paid to even the smallest details such as the bearing tangs, wrist pin fit, and big end side clearance, providing a level of fit and finish not found anywhere else. Each and every set is finish machined and honed in-house for perfectly round and on size big-end bores, resulting in the industry's lowest failure rates. All rods in this series feature generous wrist pin oiling, and optional rifle drilling. One of the hallmarks of a high quality connecting rod is its strength to weight ratio. In order to create this balance of strength and light weight, our optimized H beam design is utilized and validated using modern CAD drafting and FEA analysis techniques. These techniques ensure the rod is as light and strong as possible, perfected for today's powerful and high rpm European applications.

H BEAM FEATURES:

Additional Product features:
-2 Piece Forgings from Vacuum Drawn 4340 Chrome Moly Steel
-Multi Stage Heat Treat for maximum strength, dimensional stability, and fatigue life
-Fully Machined and Shot Peened
-Magnaflux Inspected
-Dimensionally Inspected
-Packed in balanced sets +/- 1 gram
-Combination tested to over 700HP+

BASIC DIMENSIONS FOR IERHVA1 144X20 RODS, WEIGHTS MAY VARY SLIGHTLY PER SET

IERHVA1 144X20 H BEAM CONNECTING ROD APPLICATIONS

* Please verify your engine code before ordering, don't see your engine code?

Features

• 2 Piece Forgings from Vacuum Drawn 4340 Chrome Moly Steel
• Multi Stage Heat Treat for maximum strength, dimensional stability, and fatigue life.
• Fully Machined and Shot Peened
• H beam Design
• Tolerances as tight as .0003 ground on Sunnen brand equipment
• Standard ARP2000 Rod Bolts
• Computer Optimized Design
• Magnaflux Inspected
• Dimensionally Inspected
• Packed in balanced sets +/- 1 gram.
• All this at a price point that yields market leading value

• 144mm Center to Center
• 20mm Tapered Wrist pin
• 3/8 ARP 2000 Rod Bolts

For Use in:

About Integrated Engineering: Merging decades of experience with hundreds of hours of prototyping, engineering, dyno testing and daily usage evaluation has output exhaust systems that are the ultimate compliment to your performance car. IE products are proudly engineered, designed, and manufactured in-house, in Salt Lake City USA.