SKU: 81684822241

Mark4 Mark 4 7inch 295mm FPV Frame& F4 V3S PLUS Stack BLS 60A ESC &A2807 1300KV Brushless Motor& 7040 propeller RC Drone Kit

$157.50 $175.00
Save 10%
No.2 Bestseller on tworldvietnam.com >

Pay in installments of $43.75 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 5 - Aug 10

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Mark4 Mark 4 7inch 295mm FPV Frame& F4 V3S PLUS Stack BLS 60A ESC &A2807 1300KV Brushless Motor& 7040 propeller RC Drone KitMark4 Mark 4 7inch 295mm FPV Frame& F4 V3S PLUS Stack BLS 60A ESC &A2807 1300KV Brushless Motor& 7040 propeller Rc Drone Kit Frame SPECIFICATIONS: Name: Mark 4 7inch 295mm FPV Carbon Fiber Frame Weight: 121g Motor to moto: 295MM Size: 193*223MM Arms plate: 5MM Top plate: 2. 5MM Bottom plate: 2. 5MM Side plate: 2. 5MM Camera mount size: 19. 3mm (not included) Motors: A2807 1300KV 6s Brushless Motor ESC: 40A 60A Propeller: 7 inch Battery: 4S 1800mAh 6s

 

Mark4 Mark 4 7inch 295mm FPV Frame& F4 V3S PLUS Stack BLS 60A ESC &A2807 1300KV Brushless Motor& 7040 propeller Rc Drone Kit

 

Frame

SPECIFICATIONS:

Name:Mark 4 7inch 295mm FPV Carbon Fiber Frame

Weight: 121g

Motor to moto: 295MM

Size: 193*223MM

Arms plate: 5MM

Top plate: 2.5MM

Bottom plate: 2.5MM

Side plate: 2.5MM

Camera mount size:19.3mm (not included)

 

Motors:A2807 1300KV 6s Brushless Motor

ESC: 40A-60A

Propeller: 7 inch

Battery: 4S 1800mAh-6s 2200mAh

 
Tracker 7x4x3 Durable Tri-Blade Light Grey (2CW+2CCW)-Poly Carbonate

SPECIFICATIONS:

Propeller Diameter: 7 inch

Pitch: 4

Blades: 3

Material: Poly Carbonate

Weight: 9.1g

Hub Diameter: 13.5mm

Hub Thickness: 7.5mm

Shaft: 5mm

Adaptor Rings : NO

 

F4 V3S PLUS Stack BLS 60A ESC

Specification:
Item name: F4 V3 PLUS Flight Controller
Size: 36x36mm
Mounting holes: 30.5x30.5mm
STM32 F405 MCU
Dshot support
Drag and Drop OSD configured via Betaflight
Gyro:BMI270
SBUS / PPM AND Spketrum DSMX ports
MicroSD card blackbox
Baro (BMP280)
BEC:5v3a 9V3A
On-board video filters (only 5V to VTX and camera)
The installation size is 30.5mm×30.5mm, the mounting hole is M4, and it
supports shock-absorbing column installation
ESC onboard current sensor.
Continuous current: 60A
Instantaneous current [5 seconds]: 70A
Firmware: BLS J_H_30_REV16_7
The ESC has on-board filter capacitors to suppress the back electromotive
force, stabilize the battery voltage, and protect the precision components of the flight control ESC

Betaflight F4 V3S PLUS FC + BLHELI 60A 3-6S 4-in-1 Brushless ESC

Betaflight F4 V3S PLUS FC Flight Controller:
Betaflight F4 V3S PLUS FC flight controller board for RC FPV drone.
Size: 36x36mm, Mounting Holes: 30.5x30.5mm.
The function of the flight control is to control the drone through the gyroscope on the flight control board.
Great choice for university professors and students who are interested in developing RC FPV drone.
If there are any problems, please contact our store in time.

Specifications:
Item Name: F4 V3 PLUS Flight Controller
Size: 36x36mm
Mounting Holes: 30.5x30.5mm
STM32 F405 MCU
Dshot support
Drag and Drop OSD configured via Betaflight
Gyro: BMI270
SBUS/PPM AND Spketrum DSMX ports
Memory card blackbox
Baro (BMP280)
BEC: 5V3A, 9V3A;
On-board video filters (only 5V to VTX and camera)


BLHELI_S 60A 3-6S 4-in-1 ESC:
The installation size is 30.5mm×30.5mm, the mounting hole is M4, and it supports shock-absorbing column installation
ESC onboard current sensor.
Continuous current: 60A
Instantaneous current [5 seconds]: 70A
Firmware: BLS J_H_30_REV16_7
The ESC has on-board filter capacitors to suppress the back electromotive force, stabilize
the battery voltage, and protect the precision components of the flight control ESCTracker 7X4X3 7040 7-inch 3-blade CW CCW Propeller:

Propeller Diameter: 7 inch
Pitch: 4
Blades: 3
Material: Poly Carbonate
Weight: 9.1g
Hub Diameter: 13.5mm
Hub Thickness: 7.5mm
Shaft: 5mm
Adaptor Rings: NO

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 81684822241

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 18 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
Ruckus
Pawtucket, US
★★★★★ 4
Nothing Special
Works as intended. I bought it mostly for the Ethernet adapter which was plug and play with the latest installation of Fedora Linux and uses an AX88179 Gigabit Ethernet chipset. The Ethernet portion does not have activity lights. A bit of a lazy omission. Port locations are smartly placed with the HDMI output and power input at the back facing one direction, and the Type A USB peripheral ports facing the other. This is great for cable routing. The single Type C port is only for power delivery. It will not work for data to connect other peripherals.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2026
A
Verified Purchase
Ana Lucia Gonzalez
Bozeman, US
★★★★★ 5
UGREEN
Very useful and compact USB-C hub. It easily expands connectivity with HDMI, USB ports, and fast charging support. The 4K HDMI output works well for presentations and streaming, and the 100W power delivery keeps devices charged without issues. Build quality feels solid, and it’s perfect for travel or daily use. Great value for the price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 11, 2026
C
Verified Purchase
ChrisJE
Port Orchard, US
★★★★★ 5
Compact and useful.
It's small and light enough to fit in my bag easily. My computer uses a USB-c charger, and there's only one port, but I was able to use it for ethernet, and pass the charging through the same port. I've had issues with my computer not recognizing charging from some sources before, so this was great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 28, 2026
Y
Verified Purchase
Yolando G.
Natrona Heights, US
★★★★★ 5
Good choice
I like the design it looks sturdy. Te Number or ports is very useful
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 11, 2026
A
Verified Purchase
Aaron
Lake Worth, US
★★★★★ 5
Great 10gbps USB-C Hub, worked with Anker support through compat issues with PD4 iteration 1
Original Review (updates below): ----- The moment I noticed this thing on Amazon, I bought it and it literally just arrived. Finally, 4K60 over just USB-C with other ports (including making up to 10Gbps available to them) for a reasonable price. Unfortunately, the first two things I've done with it were both disappointing. I'll cut to the chase, the power delivery pass through isn't working with one of their own chargers. The first device I tried connecting this with is my Anker PD4 with one USB-C cable as the only thing plugged into it so I can test the truly up to 100W (-15 for its own power) claims. I've tried connecting it with Apple's 2m USB-C charge cable (100w capable) and an equivalent CableMatters cable that also supports 100W. When plugged directly into my laptop, both of these cables immediately start charging it and show up as 100W power sources. When this Anker hub is plugged in and either of them is connected to the power delivery port on the side of it, the laptop does not charge (laptop is a 16" Macbook Pro, I've tried multiple ports just for the heck of it). My second complaint is that when absolutely nothing is plugged into it, it becomes fairly warm to the touch. Why, when it's doing nothing, is it hot? I'm clearly not running data or even power through it so I have low hopes for it under load. The fact that it doesn't work in exactly the scenario they want it to most (a MacBook Pro with one of their own chargers) seems like a pretty big fail. I've got lots of USB-C things though so I thought I'd grab a couple and try those. Using an Apple 96W USB-C charger, the device does pass through power delivery properly. It shows up as providing 79W to the laptop (siphoning off 17W in this instance). I also have a 56W Aukey charger that splits power between a USB-A port and a USB-C port that can provide 45W of power delivery. When plugged into that charger it does appear to work as well and appears in macOS as a 30W power source. Maybe the problem is the Anker PD4? But it works fine providing power to the laptop directly. Would love to hear from Anker about these two products working together and what I should actually expect. Having it be unreliable for power delivery isn't great, but power and heat aside (it is getting a little bit warmer now that it's providing power from the Apple power adapter, but still definitely holdable), the hardware looks and feels good and the cable feels durable. Worth also noting that there's a white LED ring on the side of it that appears to be always on when it's plugged in. Don't know why it needs an LED. ----- Update, June 22, 2020: I've done some more testing and Anker has reached out to me to investigate what might be the issue. I can say that the hub works as I would expect from a quick test with my iPad Pro 11" with the above functioning chargers. It was able to pass through power with the 96W Apple Charger on the other end to both the iPad port as well as a Magic Keyboard port. The ethernet adapter showed up in iOS settings and an external drive was functional. When connected via the Magic Keyboard, which is a power only connection, as expected it provided only power. Still no power passthrough of any kind when connected to the PD4. ----- Update July 1, 2020: I've written back and forth with Anker and they've sent me a replacement hub. It also doesn't work with the PD4. I've tried multiple USB-C cables but they have also shipped a cable to test with it. For now I'm increasing the review from 2 to 3 stars because I am more and more suspicious about the PD4 and less about this hub. They claim that they have tested the setup I have separately without issue, and I've sent video showing the problems I've encountered, so the troubleshooting is ongoing. Have had a chance to use Ethernet on it without issue. Still need to try to test out its throughput when trying to use a 10Gbps USB-C enclosure and a 4K60 monitor at the same time (+ ethernet). More updates to come. ----- Update July 10, 2020: I've continued to talk with Anker support and they shipped me a replacement PD4. The one I had was labeled as "Iteration 1" on its barcode, the one I got back was labeled "Iteration 2". I tested it out and it works perfectly with this hub, passing through the correct amount of power to multiple Macbook Pros and fast charging an iPad Pro. Clearly the fault doesn't lie with this hub and is instead an issue with the first iteration PD4, so I'm updating my review accordingly. Working with Anker support was great. I've also been able to test USB-C throughput (without driving a display as well so far) and it properly utilizes 10Gbps. I've attached some extra images showing various devices connected to it (keyboard dongle, SD card, USB-C 10Gbps external SSD enclosure, USB sound card, ethernet).
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 19, 2020

recommand products

Kristine Miller western TV show Stories of the Century 8b03-919
11.49
Bilstein B6 Performance 04-09 Chevy Kodiak V8 Rear Monotube Shock Absorber
145.03
Exclusive Red Flannel® Puppy Formula Dog Food
49.99
701 SP ROLLER AND TRA SET IMPACT 8PC
23.99
Brake Hydraulic Hose Centric Parts 150.65485
41.70